• Journal of radiological science and technology
• /
• v.37 no.1
• /
• pp.7-14
• /
• 2014

By using a Chest Phantom(DUKE Phantom) focusing on dose reduction of diagnostic radiation field with the most use of artificial radiation, and attempt to reduce radiation dose studies technical radiation. Publisher of the main user of the X-ray Radiological technologists, Examine the effect of reducing the radiation dose to apply additional filtering of the X-ray generator. In order to understand the organ dose and effective dose by using the PC-Based Monte Carlo Program(PCXMC) Program, the patient receives, was carried out this research. In this experiment, by applying a complex filter using a copper and Al(aluminum,13) and filtered single of using only aluminum with the condition set, and measures the number of the disk of copper indicated by DUKE Phantom. The combination of the composite filtration and filtration of a single number of the disk of the copper is the same, with the PCXMC 2.0. Program looking combination of additional filtration fewest absorbed dose was calculated effective dose and organ dose. Although depends on the use mAs, The 80 kVp AP projection conditions, it is possible to reduce the effective amount of about 84 % from about 30 % to a maximum at least. The 120 kVp PA projection conditions, it is possible to reduce the effective amount of about 71 % from about 41 % to a maximum of at least. The organ dose, dose reduction rate was different in each organ, but it showed a decrease of dose rate of 30 % to up 100 % at least. Additional filtration was used on the imaging conditions throughout the study. There was no change in terms of video quality at low doses. It was found that using the DUKE Phantom and PCXMC 2.0 Program were suitable to calculate the effect of reducing the effective dose and organ dose.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• autumn
• /
• pp.180-185
• /
• 2003

The increase of traffic over a bridge has been emerged as one of the most severe problems in view of bridge maintenance, since the load effect caused by the vehicle passage over the bridge has brought out a long-term damage to bridge structure, and it is nearly impossible to maintain operational serviceability of bridge to user's satisfactory level without any concern on bridge maintenance at the phase of completion. Moreover, bridge maintenance operation should be performed by regular inspection over the bridge to prevent structural malfunction or unexpected accidents front breaking out by monitoring on cracks or deformations during service. Therefore, technical breakthrough related to this uninterested field of bridge maintenance leading the public to the turning point of recognition is desperately needed. This study has the aim of development on automated inspection system to lower surface of bridge superstructures to replace the conventional system of bridge inspection with the naked eye, where the monitoring staff is directly on board to refractive or other type of maintenance .vehicles, with which it is expected that we can solve the problems essentially where the results of inspection are varied to change with subjective manlier from monitoring staff, increase stabilities in safety during the inspection, and make contribution to construct data base by providing objective and quantitative data and materials through image processing method over data captured by cameras. By this system it is also expected that objective estimation over the right time of maintenance and reinforcement work will lead enormous decrease in maintenance cost.

• Progress in Medical Physics
• /
• v.19 no.4
• /
• pp.269-275
• /
• 2008

Although MR imaging is generally applicable to depict knee joint deterioration it, is sometimes occurred to mis-read and mis-diagnose the common knee joint diseases. In this study, we employed magnetization transfer ratio (MTR) method to improve the diagnosis of the various knee joint diseases. Spin-echo (SE) T2-weighted images (TR/TE 3,400-3,500/90-100 ms) were obtained in seven cases of knee joint deterioration, FSE T2-weighted images (TR/TE 4,500-5,000/100-108 ms) were obtained in seven cases of knee joint deterioration, gradient-echo (GRE) T2-weighted images (TR/TE 9/4.56/$50^{\circ}$ flip angle, NEX 1) were obtained in 3 cases of knee joint deterioration, In six cases of knee joint deterioration, fat suppression was performed using a T2-weighted short T1/tau inverse recovery (STIR) sequence (TR/TE =2,894-3,215 ms/70 ms, NEX 3, ETL 9). Calculation of MTR for individual pixels was performed on registration of unsaturated and saturated images. After processing to make MTR images, the images were displayed in gray color. For improving diagnosis, three-dimensional isotropic volume images, the MR tristimulus color mapping and the MTR map was employed. MTR images showed diagnostic images quality to assess the patients' pathologies. The intensity difference between MTR images and conventional MRI was seen on the color bar. The profile graph on MTR imaging effect showed a quantitative measure of the relative decrease in signal intensity due to the MT pulse. To diagnose the pathologies of the knee joint, the profile graph data was shown on the image as a small cross. The present study indicated that MTR images in the knee joint were feasible. Investigation of physical change on MTR imaging enables to provide us more insight in the physical and technical basis of MTR imaging. MTR images could be useful for rapid assessment of diseases that we examine unambiguous contrast in MT images of knee disorder patients.

• Journal of Intelligence and Information Systems
• /
• v.17 no.4
• /
• pp.241-254
• /
• 2011

Financial time-series forecasting is one of the most important issues because it is essential for the risk management of financial institutions. Therefore, researchers have tried to forecast financial time-series using various data mining techniques such as regression, artificial neural networks, decision trees, k-nearest neighbor etc. Recently, support vector machines (SVMs) are popularly applied to this research area because they have advantages that they don't require huge training data and have low possibility of overfitting. However, a user must determine several design factors by heuristics in order to use SVM. For example, the selection of appropriate kernel function and its parameters and proper feature subset selection are major design factors of SVM. Other than these factors, the proper selection of instance subset may also improve the forecasting performance of SVM by eliminating irrelevant and distorting training instances. Nonetheless, there have been few studies that have applied instance selection to SVM, especially in the domain of stock market prediction. Instance selection tries to choose proper instance subsets from original training data. It may be considered as a method of knowledge refinement and it maintains the instance-base. This study proposes the novel instance selection algorithm for SVMs. The proposed technique in this study uses genetic algorithm (GA) to optimize instance selection process with parameter optimization simultaneously. We call the model as ISVM (SVM with Instance selection) in this study. Experiments on stock market data are implemented using ISVM. In this study, the GA searches for optimal or near-optimal values of kernel parameters and relevant instances for SVMs. This study needs two sets of parameters in chromosomes in GA setting : The codes for kernel parameters and for instance selection. For the controlling parameters of the GA search, the population size is set at 50 organisms and the value of the crossover rate is set at 0.7 while the mutation rate is 0.1. As the stopping condition, 50 generations are permitted. The application data used in this study consists of technical indicators and the direction of change in the daily Korea stock price index (KOSPI). The total number of samples is 2218 trading days. We separate the whole data into three subsets as training, test, hold-out data set. The number of data in each subset is 1056, 581, 581 respectively. This study compares ISVM to several comparative models including logistic regression (logit), backpropagation neural networks (ANN), nearest neighbor (1-NN), conventional SVM (SVM) and SVM with the optimized parameters (PSVM). In especial, PSVM uses optimized kernel parameters by the genetic algorithm. The experimental results show that ISVM outperforms 1-NN by 15.32%, ANN by 6.89%, Logit and SVM by 5.34%, and PSVM by 4.82% for the holdout data. For ISVM, only 556 data from 1056 original training data are used to produce the result. In addition, the two-sample test for proportions is used to examine whether ISVM significantly outperforms other comparative models. The results indicate that ISVM outperforms ANN and 1-NN at the 1% statistical significance level. In addition, ISVM performs better than Logit, SVM and PSVM at the 5% statistical significance level.

• Journal of The Korean Association For Science Education
• /
• v.24 no.3
• /
• pp.519-531
• /
• 2004

In recent years, there has been an increased emphasis on performance assessment to evaluate students' abilities. Our nation has introduced a change in testing and assessment. Additional work on the efficacy, reliability, and comparability in order to develop the performance assessment item has been needed in the enforcement of the 7th National Science Curriculum. Also, criteria for professional and technical standards has been needed to be developed. The purpose of this study was to draw out various key concepts and to develop achievement standards, assessment standards and performance assessment items based on the 7th National Science Curriculum on the subject matter of reproduction(chapter 13) and biological accumulation(chapter 17). And also, this study examined the validity of completed performance assessment items based on classical test theory and polytomous item response theory. Twelve key concepts in chapter 13(reproduction) and four from chapter 17(biological accumulation) were abstracted. Twenty-six achievement standards in chapter 13(reproduction), and nine in chapter 17(biological accumulation) were developed. The achievement standards were determined in terms of knowledge(K), process skill(P) and attitude(A). Twenty-five assessment standards in chapter 13(reproduction) and nine in chapter 17(biological accumulation) were developed. Based on the developed achievement standards and assessment standards, twenty-two performance assessment items(seventeen open-ended questions, three essays, and two portfolios) with concrete grading criteria were developed. Eight open-ended items were applied to 240 10th graders to evaluate reliabilities of the test which consisted of four items per each chapter. The results would be suggested that the applied items were valid for performance assessment because item difficulties and item discriminations were proper. There was not much differences in item discrimination between interpretation from classical test theory and that from polytomous item response theory. However, there were some differences in item difficulties between the interpretations of two theories because the characteristics of examinees were reflected in classical test theory.

• Journal of Korean Academy of Nursing
• /
• v.4 no.1
• /
• pp.1-21
• /
• 1974

A considerable change of the Korean nursing system has been made during the last decade not only in its philosophy but also in its function and structure to meet political and scientific need of the modern society. The main purpose of this study is to develope the new concept of comprehensive nursing care, both its Philosophy and ethics, as the basic of modern clinical nursing theory and practice. Comprehensive nursing care is the concept of human centered nursing care, and it helps a man to meet the basic physical, psychological, environmental, socioeconomic and teaching needs. It also helps him to help himself to meet these needs. This concept starts from the individualized nursing care and its ultimate goal is to improve a man to have a better position in his own community so that he may able to have a meaningful life. To accomplish this goal, an individualized nursing care plan as a nursing diagnosis and problem solving method should be set up for different patients with similar diagnosis to meet their needs, because each patient has a different social background. from this viewpoint, nursing is a science as well as abstruse humanity. The performance of comprehensive nursing care is a goal and issue of modern clinical nursing care. If nursing is a science and a profession for man, it should have ethics which recognize the dignity of man and offers infinite service voluntarily, and should be able to show leadership in carrying out the nursing responsibility. This leadership finds a person's potential and encourages him to utilize it. Such concepts should develop into a nursing ideology and this ideology should become a priority in comprehensive nursing care. The following statements are the conclusion of this study. 1) Modern nursing has been developed from disease centered nursing care to comprehensive nursing care based on humanity. The primary principle of nursing was to assist in the treatment of disease, but it has been changed to the professional nursing system independently. 2) The concept of nursing is one of continuous or endless scope of dispersion. It proves that nursing is grasping the professional responsibility to be able to coordinate scientific principles Patient health problems are according to scientific principles rather than adhering to nursing technical discipline as a daily work. 3) In chapter I and Ⅱ, the philosophy and ideology of nursing have been discussed and the flow of concept of clinical nursing and the rate of progress which emerges from naturalizing performance of the concept of comprehensive nursing in clinical nursing studied. The discussion developed the theory that a nurse should be to embody nursing ideas and objectives by establishing definite conviction of professions and study. 4) In chapter lil, nursing planning based on nursing diagnosis as a method to attain ideal nursing care for humanity with a definite idea of establishing philosophy of nursing was presented. 5) From the result of survey on patient needs about treatment and nursing, it was observed that all patient had emotional stress from unknown factors. Therefore it was concluded that nurses should not only educate the patient but also give them the opportunity to communicate freely their needs and anxieties. Furthermore complaints and doubts of the patient should be carefully noted and must be considered to meet these needs. 6) Patient teaching is the most important part of comprehensive nursing care. In chapter, Ⅲ, the important of patient teaching was emphasized by demonstrating the effect of patient teaching for diabetic patient. 7) In Chapter Ⅳ, from the result of the study on nurses attitudes to comprehensive nursing care, it was pointed that the evolution of nursing education and the establishment of a complete concept and value of comprehensive nursing was necessary.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.13 no.1
• /
• pp.9-14
• /
• 2009

Purpose: Nowadays in the nuclear medicine, many studies and efforts are being made to reduce the scan time, as well as the waiting time to be needed to execute exams after injection of radionuclide medicines. Several methods are being used in clinic, such as developing new radionuclide compounds that enable to be absorbed into target organs more quickly and reducing acquisition scan time by increase the number of Gamma Camera detectors to examine. Each medical equipment manufacturer has improved the imaging process techniques to reduce scan time. In this paper, we tried to analyze the difference of image quality between FBP, 3D OSEM reconstruction methods that commercialized and being clinically applied, and Astonish reconstruction method (A kind of Iterative fast reconstruction method of Philips), also difference of image quality on scan time. Material and Methods: We investigated in 32 patients that examined the Bone SPECT from June to July 2008 at department of nuclear medicine, ASAN Medical Center in Seoul. 40sec/frame and 20sec/frame images were acquired that using Philips‘ PRECEDENCE 16 Gamma Camera and then reconstructed those images by using the Astonish (Philips’ Reconstruction Method), 3D OSEM and FBP methods. The blinded test was performed to the clinical interpreting physicians with all images analyzed by each reconstruction method for qualitative analysis. And we analyzed target to non target ratio by draws lesions as the center of disease for quantitative analysis. At this time, each image was analyzed with same location and size of ROI. Results: In a qualitative analysis, there was no significant difference by acquisition time changes in image quality. In a quantitative analysis, the images reconstructed Astonish method showed good quality due to better sharpness and distinguish sharply between lesions and peripheral lesions. After measuring each mean value and standard deviation value of target to non target ratio with 40 sec/frame and 20sec/frame images, those values are Astonish (40 sec-$13.91{\pm}5.62$ : 20 sec-$13.88{\pm}5.92$), 3D OSEM (40 sec-$10.60{\pm}3.55$ : 20 sec-$10.55{\pm}3.64$), FBP (40 sec-$8.30{\pm}4.44$ : 20 sec-$8.19{\pm}4.20$). We analyzed target to non target ratio from 20 sec and 40 sec images. And we analyzed the result, In Astonish (t=0.16, p=0.872), 3D OSEM (t=0.51, p=0.610), FBP (t=0.73, p=0.469) methods, there was no significant difference statistically by acquisition time change in image quality. But FBP indicates no statistical differences while some images indicate difference between 40 sec/frame and 20 sec/frame images by various factors. Conclusions: In the circumstance, try to find a solution to reduce nuclear medicine scan time, the development of nuclear medicine equipment hardware has decreased while software has marched forward at a relentless. Due to development of computer hardware, the image reconstruction time was reduced and the expanded capacity to restore enables iterative methods that couldn't be performed before due to technical limits. As imaging process technique developed, it reduced scan time and we could observe that image quality keep similar level. While keeping exam quality and reducing scan time can induce the reduction of patient's pain and sensory waiting time, also accessibility of nuclear medicine exam will be improved and it provide better service to patients and clinical physician who order exams. Consequently, those things make the image of department of nuclear medicine be improved. Concurrent Imaging - A new function that setting up each image acquisition parameter and enables to acquire images simultaneously with various parameters to once examine.

• Journal of Chest Surgery
• /
• v.39 no.7 s.264
• /
• pp.505-510
• /
• 2006

Background: Small animal cardiopulmonary bypass (CPB) model would be a valuable tool for investigating path-ophysiological and therapeutic strategies on bypass. The main advantages of a small animal model include the reduced cost and time, and the fact that it does not require a full scale operating environment. However the rat CPB models have a number of technical limitations. Effective maintenance and control of core temperature by a heat exchanger is among them. The purpose of this study is to confirm the effect of rectal temperature maintenance using a heat exchanger of cardioplegia system in cardiopulmonary bypass model for rats. Material and Method: The miniature circuit consisted of a reservoir, heat exchanger, membrane oxygenator, roller pump, and static priming volume was 40 cc, Ten male Sprague-Dawley rats (mean weight 530 gram) were divided into two groups, and heat exchanger (HE) group was subjected to CPB with HE from a cardioplegia system, and control group was subjected to CPB with warm water circulating around the reservoir. Partial CPB was conducted at a flow rate of 40 mg/kg/min for 20 min after venous cannulation (via the internal juglar vein) and arterial cannulation (via the femoral artery). Rectal temperature were measured after anesthetic induction, a ter cannulation, 5, 10, 15, 20 min after CPB. Arterial blood gas with hematocrit was also analysed, 5 and 15 min after CPB. Result: Rectal temperature change differed between the two groups (p<0.01). The temperatures of HE group were well maintained during CPB, whereas control group was under progressive hypothermia, Rectal temperature 20 min after CPB was $36.16{\pm}0.32^{\circ}C$ in the HE group and $34.22{\pm}0.36^{\circ}C$ in the control group. Conclusion: We confirmed the effect of rectal temperature maintenance using a heat exchanger of cardioplegia system in cardiopulmonary bypass model for rats. This model would be a valuable tool for further use in hypothermic CPB experiment in rats.

• Cartoon and Animation Studies
• /
• s.35
• /
• pp.209-226
• /
• 2014

Chinese cartoon industry lately was able to see a rapid development which changed cartoon creative personnel associated with increased production technology development, new technologies, government support policy and a variety of environments. It was likely to have high expectations for changes in the policy environment of the country supported the comic creators and authors to develop its own comic industry. The State Administration of Press, Publication, Radio, Film and Television of China promoted the production for the development of Chinese animation with "domestic little video about the development of the animation industry's opinion", and "documents Documents". Animation industrial base and animation education was established in institutions such as the organization one after another. In the meantime, the spread of Japanese comics picture on the creative activation admitted but their comic creation and activation was slump. It would produce that the creation of its traditional culture based activation strategy to built comics. Since 2004, It was well represented for the creators of the cartoon creation of the tradition and uniqueness of Chinese history. In the prior to 2004, comics and strategies was to be differentiated. Today, China is an important source of comic marked the fact that the tradition was recognized and it was further developed with combining creativity of the past and the present production system. Comic creators comic story of traditional culture were excavated in order to have a sense of awareness and modern. The difference between China Cartoon and comics in other Asian countries is true that cartoon story came out naturally in a traditional culture. In this study, It would lead in the future to allow directional presented for the digital cartoon making development policy awareness through the comic creation and production of new media content industry enabled to China. Now, in the new media industry for the development of China's neighboring countries coped with climate change for the active exchange of information. It poured out ceaseless technical development and a range of policies to support business expansion. New China Cartoon was leaped to re-fit the industry.

• Cartoon and Animation Studies
• /
• s.48
• /
• pp.359-383
• /
• 2017

3,000 years ago, since the first poster of humanity appeared in Egypt, the invention of printing technique and the development of civilization have accelerated the poster production technology. In keeping with this, the expression of poster has also been developed as an attempt to express artistic sensibility in a simple arrangement of characters, and now it has become an art form that has become a domain of professional designers. However, the technological development in the expression of poster is keep staying in two-dimensional, and is dependent on printing only that it is irrelevant to the change of ICT environment based on modern multimedia. Especially, among the many kinds of posters, the style of movie posters, which are the only objects for video, are still printed on paper, and many attempts have been made so far, but the movie industry still does not consider ICT integration at all. This study started with the feature that the object of the movie poster dealt with the video and attempted to introduce the augmented reality to apply the dynamic image of the movie to the static poster. In the graduation work of the media design major of a university in Korea, the poster of each works for promoting the visual work of the students was designed and printed in the form of a commercial film poster. Among them, 6 artworks that are considered to be suitable for augmented reality were selected and augmented reality was introduced and exhibited. Content that appears matched to the poster through the mobile device is reproduced on a poster of a scene of the video, but the text informations of the original poster are kept as they are, so that is able to build a moving poster looked like a wanted from the movie "Harry Potter". In order to produce this augmented reality poster, we applied augmented reality to posters of existing commercial films produced in two different formats, and found a way to increase the characteristics of AR contents. Through this, we were able to understand poster design suitable for AR representation, and technical expression for stable operation of augmented reality can be summarized in the matching process of augmented reality contents production.