• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1995.06a
• /
• pp.47-54
• /
• 1995

Rotary forging process has many advantages such as compacting of machine, low price of facilities and good quality of products. The last presented was a technical report about rotary forging press in the 100-ton class, which has the only orbital motion limited to the forming of axisymmetric parts. In this paper, the newly developed rotary forging press is introduced. The maximum capacity of forming load is 280 ton and five locking motion, this is, orbital, straight pivot, spiral and two kinds of clover can be available. This machine consists of transmission, double eccentric bush, rocking shaft, die set and hydraulic unit. Especially, the supports of rocking shaft and double eccentric bush are so crucial that hydrostatic bearings are adopted. Finally, it is expected that the technical know-how obtained in this research can be applied to the manufacturing of the another machine with large capacity.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.39 no.3
• /
• pp.77-83
• /
• 2007

This study was carried out to examine the optimum culture condition for the production of cellulose from Saprolegnia ferax and its physical characteristics. Conclusions obtained from the results of this study were as follows: In producing the cellulose from S. ferex, optimal pH and temperature were 7.0 and $26{\sim}30^{\circ}C$ with a maximum of $26^{\circ}C$, respectively. And, optimal culture period was 11days. WHC and OHC of biocellulose were 3.2(25.04 g/g) times and 3.5(25.75 g/g) times higher than those of commercial ${\alpha}-cellulose$(7.57, 7.25 g/g) respectively. The viscosity of biocellulose is lower than that of commercial ${\alpha}-cellulose$. And the effect of rpm on the viscosity of biocellulose was more than on the that of ${\alpha}-cellulose$.

• Journal of Electrical Engineering and Technology
• /
• v.10 no.3
• /
• pp.847-858
• /
• 2015

Control strategy and corresponding parameters have significant impacts on the overall technical and economic characteristics of composite energy storage systems (CESS). A better control strategy and optimized control parameters can be used to improve the economic and technical characteristics of CESS, and determine the maximum power and stored energy capacity of CESS. A novel coordinated control strategy is proposed considering the coordination of various energy storage systems in CESS. To describe the degree of coordination, a new index, i.e. state of charge coordinated response margin of supercapacitor energy storage system, is presented. Based on the proposed control strategy and index, an optimization model was formulated to minimize the total equivalent cost in a given period for two purposes. The one is to obtain optimal control parameters of an existing CESS, and the other is to obtain the integrated optimal results of control parameters, maximum power and stored energy capacity for CESS in a given period. Case studies indicate that the developed index, control strategy and optimization model can be extensively applied to optimize the economic and technical characteristics of CESS. In addition, impacts of control parameters are discussed in detail.

• Journal of Korean Society on Water Environment
• /
• v.26 no.5
• /
• pp.816-821
• /
• 2010

It has been achieved 109.1 kg/d of BOD reduction that is equivalent to the amount of BOD loading discharged from 21,880 persons and dramatic decrease of the fallout ratio against water quality of effluent, from 42% to 9%, through technical support on ISTPs to be applied by the ISMSGA at the upper area of Geongan river in Yong-In city. It was clearly revealed that the most efficient configuration for ISTP was a series of anaerobic tank, equalization basin, aerobic tank, sedimentation tank, and then effluent tank. Also, the major causes on the fallout ratio of ISTP resulted in the lack of management (67.5%) and imperfect facilities (32.5%). Then, when compared the quantity of water supply with the design capacity of ISTP, the design capacity was estimated as 1.8 or 2.4 folds larger than the real quantity of water supply so that it is essential to punctually consider the key factors such as an estimation methods, the specificity of commission operator and construction by high systematic technologies to improve the water quality for the future.

• Earthquakes and Structures
• /
• v.9 no.6
• /
• pp.1337-1353
• /
• 2015

Seismic upgrading of existing structures is a technical and social issue aimed at risk reduction. Sustainable design is one of the most important challenges in any structural project. Nowadays, many retrofit strategies are feasible and several traditional and innovative options are available to engineers. Basically, the design strategy can lead to increase structural ductility, strength, or both of them, but also stiffness regulation and supplemental damping are possible strategies to reduce seismic vulnerability. Each design solution has different technical and economical performances. In this paper, four different design solutions are presented for the retrofit of an existing RC frame with poor concrete quality and inadequate reinforcement detailing. The considered solutions are based on FRP wrapping of the existing structural elements or alternatively on new RC shear walls introduction. This paper shows the comparison among the considered design strategies in order to select the suitable solution, which reaches the compromise between the obtained safety level and costs during the life-cycle of the building. Each solution is worked out by considering three different levels of seismic demand. The structural capacity of the considered retrofit solutions is assessed with nonlinear static analysis and the seismic performance is evaluated with the capacity spectrum method.

• Korean Journal of Metals and Materials
• /
• v.46 no.10
• /
• pp.662-671
• /
• 2008

The behavior of hydrogen in the steel making process was investigated. The relation between the composition of ladle slag and hydrogen concentration in molten steel was considered. The hydrogen distribution ratio between ladle slag and molten steel was increased with increasing basicity of the slag; it was about 20 when the basicity of slag was 15. Hydroxyl capacity measured from the hydrogen distribution ratio between slag and the molten steel was comparatively corresponding to the value of hydroxyl capacity measured by the equilibrium reaction of slag and $H_2O$ gas. However, it is considerably different from the value calculated by regular solution model. The influence of hydrogen on a sticking type breakout is considered. The effect of hydrogen and $H_2O$ gas on the crystallization behavior of mold powder was investigated by DHTT (Dual hot thermocouple technique). As a result, it was proved that mold powder could be crystallized by $H_2O$ gas in the atmosphere. Therefore, it is concluded that $H_2O$ gas in the atmosphere can be a possible cause of the sticking type breakout that occasionally occurs in the continuous casting process.

• ETRI Journal
• /
• v.40 no.3
• /
• pp.330-336
• /
• 2018

Free-space optical (FSO) systems have attracted much attention from both research and application perspectives owing to their many benefits, such as license-free operation, low-cost, and high data rates. This paper investigates the ergodic capacity of FSO systems, which is an important metric of system performance. The stochastic temporary laser-beam blockage, pointing errors, and atmospheric turbulence are simultaneously considered. The results illustrate that the link blockage causes a decreased ergodic capacity. We show that to maximize the ergodic capacity, there is an optimal value of the laser-beam radius at the waist, which largely depends on pointing errors; however, it is independent of the atmospheric turbulence and the probability of link blockage.

• Journal of Information Technology Applications and Management
• /
• v.22 no.3
• /
• pp.129-141
• /
• 2015

The purpose of this study is to provide an explanation for the association between the characteristics of a network and the type of innovation by considering the effect of absorptive capacity. To do so, this study examined the moderating effects of absorptive capacity on the characteristics of network-innovation relationship in a technical-driven venture company. In order to obtain a better understanding about consequences caused by interfirm network, information was obtained from 169 Korean IT venture companies. Results confirmed that the network diversity is positively associated with exploration. Our results also suggested that the network strength is positively associated with exploitation. Finally, we found a positive two-way interaction between absorptive capacity and the network diversity-exploration relationship. Then, we discussed implications and directions for future research.

• Proceedings of the Optical Society of Korea Conference
• /
• 1996.09a
• /
• pp.29-29
• /
• 1996

• Journal of Information Technology Applications and Management
• /
• v.15 no.3
• /
• pp.209-225
• /
• 2008

The purpose of this study is to examine the relationship between IT human capability and knowledge transfer and the role of absorptive capacity between them. From the test of both measurement and structural model using Partial Least Squares (PLS), IT human capability is found to be significant to absorptive capacity and knowledge transfer. Absorptive capacity is also significantly related to knowledge transfer. The interesting result found in this study is that the path of absorptive capacity drawn from IT human capability to knowledge transfer is stronger than the direct relationship between IT human capability and knowledge transfer, indicating that absorptive capacity plays an important role in knowledge transfer. This result indicates that IT personnel with stronger technical skill, interpersonal skill and management capability are more likely to acquire and learn knowledge effectively from outside expertise. Moreover, this study shows that absorptive capacity, the individual’s ability to utilize external knowledge is derived from IT human capability and strongly effects on transferring knowledge from outsourcing vendors. This study suggests IT related managers that the development of IT human capability and absorptive capacity should be recognized for a successful exploitation of outside knowledge within a firm. It is also a necessary condition for a successful IT implementation and maintenance independently and economically from outside vendors.