• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 하계학술대회 논문집 D
• /
• pp.1041-1043
• /
• 1997

When a new transmission line is planned to construct, the system voltage and the conductor size of the transmission line should be decided by both economical and technical point of view. This paper presents a methodology to determine the optimal voltage for upgrading the transmission system voltage of existing the extra high voltage grid network by meeting the requirements of the transmission cost minimization as well as technical constraints of thermal limit and stability limit in the transmission line. As a case study, calculated are optimal voltages versus distance and capacity of a practically applicable transmission line with 4 bundles 2 circuits. By this study 400kV was selected as the next higher voltage for the existing 220kV Libyan grid network.

• Corrosion Science and Technology
• /
• 제2권3호
• /
• pp.127-134
• /
• 2003

In order to explain the effect of alloying Cu on the corrosion resistance of stainless steels in chloride media for both ferritic and austenitic stainless steels, the corrosion behavior of Cu-bearing stainless steels was investigated. Alloying Cu showed beneficial effect in an active potential range and harmful effect in a noble potential range. The beneficial effect of alloying Cu was explained by the stability of deposited Cu on an anodic surface. Difference in the effect of alloying Cu between the ferritic and austenitic steels was ascribed by the differences in their corrosion potentials and the morphology of the deposited Cu.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 세계 도시지반공학 심포지엄
• /
• pp.319-334
• /
• 2009

This paper describes an overview of technology and research of dam and levee in Korea. In order to trace the development of dam and levee construction technology, history of design and construction of them is briefly reviewed, and their statistics including type, number and purpose of those hydraulic structures in Korea are dealt with. Furthermore, current status of research on the mentioned structures is also reviewed based on the papers published in Korean societies such as Korean Society of Civil Engineers and Korean Geotechnical Society. Finally state-of-the-art equipment and technology to investigate the safety conditions, and hence to enhance or rehabilitate their stability and dam and levee systems, respectively, are introduced here.

• 한국산학기술학회논문지
• /
• 제5권4호
• /
• pp.286-291
• /
• 2004

실무 현장에서 피로 파괴가 잘 일어나고 있는 상황이다. 그런데 그 하중도 불규칙적으로 일어나고 있어 예측이 불가능하여 언제 파괴가 일어나는지를 잘 알 수가 없는 상황이다. 본 연구에서는 그러한 불규칙적인 피로 하중을 시뮬레이션 하여 그 재료의 안정성과 수명 관계를 Ansys workbench 프로그램을 이용하여 이론적으로 해석하여 보았다. 이러한 결과들을 실제 구조물에서 응용하면 그 파손 방지 및 내구성을 예측하는데 활용이 크다고 본다.

• 한국산학기술학회:학술대회논문집
• /
• 한국산학기술학회 2004년도 춘계학술대회
• /
• pp.100-102
• /
• 2004

실무 현장에서 피로 파괴가 잘 일어나고 있는 상황이다. 그런데 그 하중도 불규칙적으로 일어나고 있어 예측이 불가능하여 언제 파괴가 일어나는지를 잘 알 수가 없는 상황이다. 본 연구에서는 그러한 불규칙적인 피로 하중을 시뮬레이션하여 그 재료의 안정성과 수명 관계를 Ansys workbench 프로그램을 이용하여 이론적으로 해석하여 보았다. 이러한 결과들을 실제 구조물에서 응용하면 그 파손 방지 및 내구성을 예측하는데 활용이 크다고 본다.

• 펄프종이기술
• /
• 제35권4호
• /
• pp.57-67
• /
• 2003

The purpose of the present study is to identify the drying cylinder model in paper plants and to analyze characteristics of process responses for changes in input variables. The model developed in this work is based on actual plant operation data and the steam pressure applied to the cylinder behaves as one the main variables. It is found that heat transfer coefficients from the condensate to the canvas could be represented as empirical relations based on heat conductivities and operation date. The effectiveness of the cylinder model is demonstrated by the measured moisture contents and web temperature. Using transfer functions derived from the cylinder model stability of the drying process is analyzed.

• 펄프종이기술
• /
• 제39권3호
• /
• pp.36-40
• /
• 2007

It has been problematic to repulp the dry broke treated with permanent wet strength agents like PAE, UF and MF. Solution type GPAM has the benefit of easy repulping but it has problems of cocross-linking and tends to gel. Therefore, the product concentration must be lower than 10% to reduce the gel generation problem. We developed emulsion type GPAM by an inverse emulsion technology to resolve both the repulping problem with permanent wet strength agents and the stability problem of GPAM solution products.

• 펄프종이기술
• /
• 제42권5호
• /
• pp.24-30
• /
• 2010

Papermaking technology has drastically improved over the last 20 years to face new challenges. Because environmental regulations have become increasingly strict, papermaking systems have had to accommodate elevated recycled pulp content and an increased use of recycled process water. Process water in papermaking systems has become more dirtier and reduced polymer efficiency. Amphoteric PAM demonstrated a higher degree of stability in a high conductivity environment compared to cationic PAM. This was illustrated by the improved retention performance, particularly the ash retention. This amphoteric polymer can be used for board or newsprint production using recycled pulp, especially for the systems where polymer dissolving water is high in conductivity and degradation of cationic functional groups of cationic PAM can occur.

• 펄프종이기술
• /
• 제34권5호
• /
• pp.49-55
• /
• 2002

A new method is proposed for the on-line measurement of the fiber orientation of sheet materials. The measurement of fiber orientation is very important in manufacturing paper sheets, non-woven fabrics, and glass sheets, because fiber orientation strongly affects product properties represented by, for example, dimensional stability of paper. A method developed in this research utilizes anisotropy of dielectric constants of sheet materials as a key characteristic to determine the fiber orientation. The new on-line sensor, consisting of 5 microwave dielectric resonators set in different directions, was designed to detect the fiber orientation while paper is running with high speed on a paper machine. This sensor can determine the direction and the degree of fiber orientation from the measured direction of the maximal dielectric constant and its variation, respectively. The fundamental performance of this system was examined by the static measurement of printing grade paper, which gave a satisfactory result. Then, the dynamic measurements were done at a speed of 1,000 m/min by using a high-speed test-coating machine.

• Korean Journal of Chemical Engineering
• /
• 제35권11호
• /
• pp.2296-2302
• /
• 2018

Internally plasticized PVC was prepared via chemical reaction of azide PVC and alkynyl group containing castor oil methyl ester. The chemical structure of alkynyl group containing castor oil methyl ester and internally plasticized PVC was characterized with FT-IR and $^1H$ NMR. Properties of internally plasticized PVC, including thermal stability, tensile tests and resistance to extraction in different solvents, was investigated. The results showed that alkynyl group containing castor oil methyl ester, as internal plasticizer of PVC, not only decreased the $T_g$ of PVC from $84.6^{\circ}C$ to $41.6^{\circ}C$ efficiently, but also presented no plasticizer loss in five different solvents. The tensile tests showed that elongation at break and tensile strength of internally plasticized PVC was 353.8% and 18.1 MPa. The internally plasticized PVC has potential application in replacing the traditional PVC material in PVC products with high durability.