• 정보처리학회논문지:소프트웨어 및 데이터공학
• /
• 제4권3호
• /
• pp.99-110
• /
• 2015

사물 인터넷(Internet-of-Things, IoT) 컴퓨팅은 무선 인터넷으로 다양한 디바이스를 연결하고 센서를 통해 획득한 사용자 주변 환경 정보를 이용하여 디바이스를 제어하는 여러 기술의 융합 기술이다. IoT 애플리케이션은 기존 소프트웨어와는 달리 다수 개의 IoT 디바이스와 협업을 통해 사용자에게 기능을 제공하고, 센서 네트워크, 통신 기술, 소프트웨어 공학 등 여러 기술들을 활용하여 설계된다. 그리고 최근에 소개된 신기술이기 때문에, 대부분의 연구는 시작 단계에 있다. 이런 이유로, IoT 애플리케이션 개발 프로젝트는 기존의 소프트웨어 개발 프로젝트에서 관찰되지 않은 기술적 이슈들이 발생할 수 있고, 기존의 프로젝트 수행 가이드라인을 그대로 적용하는 것이 제한되어 성공적으로 프로젝트를 수행하는 데 어려움이 따른다. 따라서 본 논문에서는 IoT 애플리케이션을 효율적으로 개발하기 위해, 프로젝트 준비 및 계획 단계와 설계 및 개발 단계로 구분하여 각 단계별로 기술적 이슈를 나열하고 효과적인 솔루션을 제시하고자 한다. 또한 IoT 디바이스 중 AR.Drone과 Sphero Ball을 활용한 애플리케이션 개발에서 본 논문의 솔루션에 대한 적용 및 활용 사례를 보여줌으로써, 연구의 실효성을 검증한다.

• Journal of Welding and Joining
• /
• 제27권1호
• /
• pp.79-84
• /
• 2009

Ferritic stainless steel, which has been used as material for decoration parts in automobile, is recently used as material for the exhaust system due to its good performance at high temperature. To improve the fuel efficiency and purify automotive exhaust gas, it is needed to increase the temperature of exhaust gas. However, it is frequently reported that the rising of the temperature of exhaust gas increases thermal stress at exhaust manifold, which results in thermal fatigue failure in welded joints. Therefore, in this study, effects of chemical composition of steel and welding parameters on thermal fatigue properties of synthetic heat affected zone in ferritic stainless steel have been investigated. It has been found that thermal fatigue life in heat affected zone is affected by bead shape of welded joint and amount of soluble Nb in steel. Especially, Nb-Ti added steel has higher thermal fatigue life in comparison to Nb added steel, which is attributed to difference of precipitation behavior in both steels.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2009년 추계학술발표대회
• /
• pp.63-63
• /
• 2009

최근 연비 향상 및 배기가스 저감을 위한 친환경 경량 굴삭기에 대한 연구가 활발히 진행되고 있다. 이러한 시도는 굴삭기의 소재의 강도를 490MPa급에서 700MPa급으로 고강도화를 통하여 작업장치의 경량화를 도모하고 있다. 본 연구에서는 중장비용 고강도 열연강재로 재발중인 ATOS70강재의 기본 용접성 및 GMAW 용접부 특성을 검토하였다. 사용한 시험재는 현장시험재인 14~16mmt두께의 ATOS70강재를 사용하였고, 용접경화성 및 저온균열감수성을 평가하였다. 또한 GMAW 용접을 실시하여 용접부의 이음부 특성을 검토하였다. 14mmt 두께의 ATOS70강재의 탄소당량은 약 0.44수준이고, 모재 인장강도는 약 760MPa급 수준을 보였다. 한편 최고경도시험에 의한 용접부 최도경도는 약 300Hv 수준을 보였으며, 경사 y-groove구속시험에 의한 14mmt두께의 한계예열온도는 상온이었다. 한편 GMAW 용접부 인장시험결과 740MPa급 이상의 인장강도를 확보하였고, $-5^{\circ}C$ 용접부 Charpy 충격시험결과 48J 이상의 충격인성을 나타내었다.

• Structural Engineering and Mechanics
• /
• 제89권6호
• /
• pp.589-599
• /
• 2024

This study presents the usability of the high-rate single-frequency Precise Point Positioning (SF-PPP) technique based on 20 Hz Global Positioning Systems (GPS)-only observations in detecting dynamic motions. SF-PPP solutions were obtained from post-mission and real-time GNSS corrections. These include the International GNSS Service (IGS)-Final, IGS real-time (RT), real-time MADOCA (Multi-GNSS Advanced Demonstration tool for Orbit and Clock Analysis), and real-time products from the Australian/New Zealand satellite-based augmentation systems (SBAS, known as SouthPAN). SF-PPP results were compared with LVDT (Linear Variable Differential Transformer) sensor and single-frequency relative positioning (SF-RP) solutions. The findings show that the SF-PPP technique successfully detects the harmonic motions, and the real-time products-based PPP solutions were as accurate as the final post-mission products. In the frequency domain, all GNSS-based methods evaluated in this contribution correctly detect the dominant frequency of short-term harmonic oscillations, while the differences in the amplitude values corresponding to the peak frequency do not exceed 1.1 mm. However, evaluations in the time domain show that SF-PPP needs high-pass filtering to detect accurate displacement since SF-PPP solutions include trends and low-frequency fluctuations, mainly due to atmospheric effects. Findings obtained in the time domain indicate that final, real-time, and MADOCA-based PPP results capture short-term dynamic behaviors with an accuracy ranging from 3.4 mm to 8.5 mm, and SBAS-based PPP solutions have several times higher RMSE values compared to other methods. However, after high-pass filtering, the accuracies obtained from PPP methods decreased to a few mm. The outcomes demonstrate the potential of the high-rate SF-PPP method to reliably monitor structural and earthquake-induced ground motions and vibration frequencies of structures.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2007년도 제32회 펄프종이기술 국제세미나
• /
• pp.57-82
• /
• 2007

Rebuilding an existing paper machine is often a very profitable way for papermakers to increase the cash flow created by an older paper machine. In Metso Paper we have placed particular emphasis in recent years on developing concepts and products specifically for rebuild needs. The outcome of this work can now be seen as a wide selection of products offering quite possibly the best coverage of all time of specific improvement targets. Different needs can be addressed through truly different solutions. Selecting the best-fit alternatives will offer great upgrade options for all paper machines and paper grades. Metso Paper's long experience with high-speed paper machines has been put to good use to create more cost-effective small and mid-sized solutions with the reliability and quality of bigger and faster paper machines. This paper has discussed some of the most interesting and latest configurations available today for paper machine rebuilds.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2006년도 PAN PACIFIC CONFERENCE vol.1
• /
• pp.67-71
• /
• 2006

Strong oxidizing biocides are commonly used to control biofilm formation in alkaline papermaking systems. However, paper streams contain many substances that react with or consume oxidizers (e.g., fiber and starch, Therefore, to achieve effective microbiological control, the oxidizer must be overfed to overcome the effect of these substances. When dosed in this manner, the oxidizer can cause many unwanted reactions and adverse side effects, including the consumption of costly papermaking additives increased corrosion rates, and reduced felt life. Some oxidizers also contribute to the formation of halogenated organic compounds. When used for biofilm control, strong oxidizers can cause more problems than they remedy. A patented biocide that effectively controls biofilm without the adverse side effects associated with strong oxidizing biocides is available from Hercules. $Spectrum^{(R)}$ XD3899 Ammonium Bromide Technology, which can be described as a mild oxidizer, is currently used on more than 300 machines globally and has resulted in numerous production and/or machine efficiency records since its introduction in 2001.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2006년도 추계학술발표논문집
• /
• pp.131-151
• /
• 2006

Rebuilding an existing paper machine is often a very profitable way for papermakers to increase the cash flow created by an older paper machine. Metso Paper has placed particular emphasis in recent years on developing concepts and products specifically for rebuild needs. The outcome of this work can now be seen as a wide selection of products offering quite possibly the best coverage of all time of specific improvement targets. Different needs can be addressed through truly different solutions. Selection the best-fit alternatives will offer great upgrade options for all paper machines and paper grades. Metso Paper's long experience with high-speed paper machines has been put to good use to create more cost-effective small and mid-sized solutions with the reliability and quality of bigger and faster paper machines. This paper has discussed some of the most interesting and latest configurations available today for paper machine and finishing area rebuilds.

• 펄프종이기술
• /
• 제40권5호
• /
• pp.70-80
• /
• 2008

Rebuilding an existing paper machine is often a very profitable way for papermakers to increase the cash flow created by an older paper machine. Metso Paper has placed particular emphasis in recent years on developing concepts and products specifically for rebuild needs. The outcome of this work can now be seen as a wide selection of products offering quite possibly the best coverage of all time of specific improvement targets. Different needs can be addressed through truly different solutions. Selecting the best-fit alternatives will offer great upgrade options for all paper machines and paper grades. Metso Paper's long experience with high-speed paper machines has been put to good use to create more cost-effective small and mid-sized solutions with the reliability and quality of bigger and faster paper machines. This paper has discussed some of the most interesting and latest configurations available today for paper machine and finishing area rebuilds.

• 정보처리학회논문지:컴퓨터 및 통신 시스템
• /
• 제3권10호
• /
• pp.337-350
• /
• 2014

사물 인터넷(Internet-of-Things, IoT)은 무선 인터넷을 기반으로 다양한 디바이스를 연결하고 센서를 통해 환경 정보를 획득하고 이를 기반으로 제어하는 여러 기술이 융합된 컴퓨팅 패러다임이다. IoT 환경에서 애플리케이션은 네트워크에 연결된 여러 디바이스들을 이용하여 사용자에게 유용한 정보와 편의를 제공할 수 있다. IoT 디바이스들은 단순한 정보를 제공하기도 하고, 다수의 디바이스들의 협업에 의한 서비스를 제공하기도 한다. 즉, IoT 애플리케이션은 빠르게 보급되고 있는 IoT 디바이스와 같이 상호작용한다. 이런 이유로 IoT 애플리케이션의 개발은 소프트웨어 기능만으로 구성된 소프트웨어 시스템 개발에는 나타나지 않는 비전형적인 기술적 이슈를 가지고 있다. 나아가 임베디드 컴퓨팅, 모바일 컴퓨팅 등의 패러다임과도 구별되기 때문에, 기존 형태의 시스템 개발에서 볼 수 없었던 이슈를 가지고 있다. 본 논문은 IoT 애플리케이션 개발에서 발생하는 기술적 어려움을 분석하고, 이들을 효과적으로 해결할 수 있는 기법들을 제시한다. 제시된 이슈들과 기법들을 검증하기 위하여, IoT 애플리케이션을 개발한 사례연구 결과를 보여준다. 이를 통하여, IoT 애플리케이션 개발의 비전형적인 기술적 이슈들이 구체적으로 어떻게 발생하여, 제시된 솔루션들이 어떻게 효과적으로 적용되었는지 분석한다.

• 펄프종이기술
• /
• 제43권2호
• /
• pp.40-48
• /
• 2011

To build up the conservativeness of aged paper heritages, the strength reinforcement treatment using various cellulose derivative solutions was considered. Hand-made Hanji prepared by traditional papermaking technique was firstly simulated in order to modify the overall of paper properties like aged paper heritages by accelerated ageing treatment at $150^{\circ}C$ for 24 hours, and then the ageing stability of Hanji was verified through the secondary accelerated ageing at $150^{\circ}C$ for 12 hours. The physical properties of aged Hanji were improved by applying with cellulose derivative solutions. The ageing stability for physical, optical (L, brightness, opacity, yellowness) and chemical (oxidation index, degree of polymerization) properties of aged Hanji treated with all kinds of cellulose derivative solutions was also good compared to those of untreated samples, especially using MC solution. Therefore, it was that a kind of MC solution would be well-suited for the strength reinforcement treatment of aged paper heritages.