• Architectural research
• /
• v.14 no.4
• /
• pp.117-124
• /
• 2012

High rise office buildings represent one of the most energy-intensive architectural typologies. The growth of urban population necessitates sustainable high rise towers that lessen environmental impacts and energy consumption. Among various sustainable strategies, the integrated design is long known to be an important process that has great impact on building's sustainability. The framework for this paper is based on the case study of integrated towers that are located in different climate zones. The paper specifically addresses to what extent climate conditions influence the design of a high rise building and what kinds of the climate integrated design has been implemented. Qualitative case studies were carried out using published data and architectural drawing set. The technical work presented in the paper is based on computer simulation that examines the insolation analysis using hourly recorded weather data. The analysis results revealed that the site and building envelope integration and the site and building service systems have shown the most frequently employed in the integrated towers through the implementation of renewable resource integration, high performance envelopes and sustainable building service systems. Internal comfort and further energy saving in the integrated towers are offered through an automatic building management system. Due to the dynamic climate conditions, integration of building systems requires a sophisticated approach to building sustainability.

• The Journal of Korean Association of Computer Education
• /
• v.19 no.6
• /
• pp.81-89
• /
• 2016

As the social and technical circumstance changes rapidly, passive learners who were knowledge-finders not only remember and regenerate about the given information but also critically grasp the phenomena of real life, and then also it became necessary for us to help cultivate the ability to solve the problem creatively in the new form of educational goal, educational content, educational methods and evaluation, educational environment. As a result, this study analyzes the smart learning education, fit the model of smart learning education training in high school information ethics parts, design the lesson that is proposal class of 'Information protection and Security' section, and develop the teaching and experience educational contents, furthermore, It is to investigate the impact on the ethics consciousness about information communications.

• Journal of Navigation and Port Research
• /
• v.38 no.3
• /
• pp.193-202
• /
• 2014

The comprehensive review of the STCW 1978, as amended in 1995 and associated Code was carried out from 2006 to 2010. These amendments will have a certain degree of impact on Maritime Education and Training(MET) institutes in terms of education and training of seafarer worldwide. Particularly, the Far East region countries are effected more than other regions since they covered about 30% of officers and 37% ratings in the world. In view of these facts this dissertation conceived to analyze the problems in the Far East main seafarer supply countries faced the implementation of "STCW Manila Amendments" To analyze these problems, this dissertation carried out questionnaire research to 7 targeted main MET of major Far East seafarer supply countries. After research this dissertation suggests the possible solutions such as, Joint On-Board Training Center; Joint Asia Maritime E-learning Systems; methods to reducing work-load, ship inspection burden and determine mandatory minimum safety manning standards in a safe way; technical cooperation fund to installation of training equipment; and clarify vague terminology of STCW Manila Amendments, to solve problems identified through the questionnaires.

• Journal of Information Technology Services
• /
• v.16 no.2
• /
• pp.61-83
• /
• 2017

It is well known that PMO (Project Management Office)s are effective for successful project performance. Since it takes a long time to develop PMO capability, many public organizations and companies that do not have internal PMOs are increasingly relying on outsourcing of PMO functions in order to introduce mature PMO capabilities in a short period of time. However, it is not verified yet whether outsourced PMO is more effective than internal PMO or not. The objective of this study is to verify the effectiveness of PMO outsourcing. There are many different definitions about PMO function, and even the same PMO function may have different effectiveness depending on the Industry. Thus, this study redefined the PMO functions and Project Performance based on the past studies, and conducted research by focusing on the ICT (Information and Communication Technology) industry. The ICT industry is an important industry economically and has been attracting global attention recently. This study is the first attempt to prove the effectiveness of outsourcing of PMO function in Korea. We found that PMO function outsourcing is effective for certain aspects of project performance, particularly technical support and infrastructure management. Overall, PMO outsourcing is usually more effective than internal PMO for improving project performance. The results of this study are expected to contribute to the development of PMO theories and practices.

• The Journal of Asian Finance, Economics and Business
• /
• v.7 no.7
• /
• pp.439-451
• /
• 2020

This study focused on researching the factors affecting retail banking efficiency of Vietcombank branches in the Mekong-Delta region. By collecting data from financial statements from 15 branches of VCB in the Mekong-Delta Region between 2015 and 2018, the paper applies DEA estimation to measure the effectiveness of retail banking activities and uses the Tobit regression model to identify factors affecting retail banking efficiency. The results demonstrate that the retail banking efficiency of branches averaged 52.5% during the period. The rating result shows the branches in An Giang, Can Tho, Dong Thap, Kien Giang, Long An, Phu Quoc and Tra Noc rank at the top technical efficiency. In group of medium efficiency, there are branches in Soc Trang, Tien Giang and Vinh Long. In the category of the poor efficiency are the branches in Bac Lieu, Ben Tre, Ca Mau, Chau Doc and Tra Vinh. The results also show that bank scale-related factors, capital adequacy, credit quality, time specific and region impact significantly the retail banking efficiency. The research not, only contributes to enriching the empirical research method but also is significant for the management activities in business developing strategies, improving the operational efficiency of Vietcombank in the region.

• Korean Journal of Digital Imaging in Medicine
• /
• v.7 no.1
• /
• pp.33-38
• /
• 2005

Modern hospitals have been greatly facilitated with information technology (IT) such as hospital information system (HIS). One of the most prominent achievements is medical imaging and image data management so-called Picture Archiving and Communication Systems (PACS). Due to inevitable use of diagnostic images (such as X-ray, CT, MRI), PACS made tremendous impact not only on radiology department but also nearly all clinical departments for exchange and sharing image related clinical information. There is no doubt that better use of PACS leads to highly efficient clinical administration and hospital management. However, due to rapid and widespread acceptance of PACS storage and management of digitized image data in hospital introduces overhead and bottleneck when transferring images among clinical departments within and/or across hospitals. Despite numerous technical difficulties, financing for installing PACS is a major hindrance to overcome. In addition, a mirroring or a clustering backup can be used to maximize security and efficiency, which may not be considered as cost-effective approach because of extra hardware expenses. In this study therefore we have developed a new based on grid of distributed PACS in order to balance between the cost and network performance among multiple hospitals.

• Journal of the Korean Society for Precision Engineering
• /
• v.34 no.2
• /
• pp.95-99
• /
• 2017

The recent development of core techniques in the IT industry can be summarized as a technical advancement for safety and convenience, and mechanical technology for being "eco-friendly" and lightweight. Under these circumstances, research of lightweight material has become attractive. In this study, CFRP (Carbon Fiber Reinforced Plastic) laminate specimens are subjected to a tensile test using the UTM(Universal Testing Machine, AG-IS 100 kN) to estimate their mechanical properties in terms of the Hole machining impact evaluation. The FEM (Finite Elements Method) analysis method is applied and the material properties obtained from basic experiments such as the Tensile test, the compressive test, and the shear test. CFRP materials properties from a previous study, as well as a finite element analysis program for Hole machining CFRP was compared with the experiments.

• Fire Science and Engineering
• /
• v.15 no.2
• /
• pp.20-30
• /
• 2001

The science and technology of seismic hazard mitigation are increasingly being shared among scientists and policy makers around the world. Administrative expertise is also being shared. While there is still tremendous unevenness in technical and administrative capacities and resources, a global community of emergency managers is developing and there is a globalization of expertise. Hazards are better understood, tools for risk assessment are improving, techniques for hazard mitigation are being perfected, and communities and states are implementing more comprehensive disaster preparedness, response, and recovery programs. Priorities are also emerging and hazard mitigation has emerged as the priority of choice in North America and Europe. An increasingly important component of hazard mitigation is resilience, in terms of increased capacities for disaster mitigation and recovery at the community and even individual levels. Each year, more is known about the locations and natures of seismic hazards, although there are still unknown and poorly understood fault lines and limited understanding of related disasters such as tsunamis and landslides. More is known about the impact of earthquakes on the built environment, although nature still provides surprises to confound man's best extorts to reduce risk. More is known about human nature and how people respond to uncertain risk and when confronted by certain catastrophe. However, despite the increased understanding of seismic phenomena and how to protect people and property, there is much that needs to be done to reduce the risk, particularly in major metropolitan areas.

• Journal of the Korean Regional Science Association
• /
• v.14 no.2
• /
• pp.65-75
• /
• 1998

Education is widely recognized one of main sources for growth. This paper attempts to incorporate the general recognition into formal regional growth model. The model structure is largely neoclassical. It produces a single good with the two factors, educated labor and non-educated labor, via a constant return production migrating to the region with the higher real wage. The educated labor in a region is accumulated by two sources, migration and physical education capital, while the non-educated labor is by only migration. The paper shows that regional growth equilibrium is characterized as a saddle point. This indicates the presence of the minimum threshold size that must be overcome before a region may grow. It contrasts sharply with results obtained in regional growth models. The paper suggests that regional growth is determined less by the technical characteristics of regional production function characteristics of regional production function but by the stock combination of educated function but by the stock combination of education labor and non-educated labor. Based on this result, the impact of agglomeration economies on regional growth is explored. It is by phase diagram demonstrated that the presence of agglomeration economies do not always lead a region to growth since there still exists the minimum threshold even in the presence of agglomeration economies.

• Proceedings of the Technology Innovation Conference
• /
• 1992.12a
• /
• pp.97-118
• /
• 1992

To date, the implementation and adoption of new manufacturing technologies has been retarded despite their technical advances and strategic virtues such as flexibility and synergy effect. This phenomenon is partly attributable to the lack of commensurate development and widespread dissemination of adequate selection and justification procedures. Many strategically vital automation projects have been rejected and/or seemingly promising proposals have turned out to be fiascos since the justification process has been solely based on the traditional capital budgeting or engineering economy methods. As the degree of system automation/integration increases, a variety of benefit/cost attributes, both quantitative and qualitative, should be taken into account and more comprehensive and analytic justification methods should be applied in the justification process. This paper points out the distinct characteristics of advanced technologies and presents an illustrative set of procedures that can be used in the justification process. It outlines the algorithmic structure of each procedure and also describes the advantages/disadvantages of each procedure and the conditions under which it is most appropriate to employ. The selection of appropriate justification technique is situation-specific. In general, it is recommended that more complex and sophisticated procedures be used as the degree of integration increases. Nonetheless, traditional procedures may be used as well to make in-depth analyses of the local impact.