• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2018.10a
• /
• pp.46-46
• /
• 2018

The Platycodon grandiflorum (balloon flower) has been used as food material and traditional medicine in Asia. The roots have been used in traditional medicine to treat coughs, upper respiratory infections, and sore throats. Using 1,603 valid patents from 6 countries, we analyzed the patent trend based on year, countries, applicants, and technology. The technologies are categorized into 6 groups which include material, additives, manufacture, cultivation, breeding and seed. The technology competitiveness of countries were analyzed with quantitative factors such as cites per patent, patent impact index, patent family size and technology strength. In comparison with other countries in the patent index, South Korea shows an increasing trend in patent numbers and total leverage ability, although the individual technology is lower than Japan and USA. Our study provides information on technical trend to support the performance of new projects on balloon flower.

• Journal of Forest and Environmental Science
• /
• v.34 no.2
• /
• pp.192-195
• /
• 2018

To establish a management strategy of sediment-related disasters for adaptation to climate change, it is necessary to 1) understand the specific details and problems about the present status, 2) systematize related technologies by using exact numerical values obtained from physically-based analysis, and 3) ensure the basic guidelines are applied to field elastically. To achieve these successfully, detailed guidelines are required by scientifically considering the utilization and impact of related technology on the field. Here, detailed guidelines should include 1) the development of a basic plan, 2) enhancement of relevant technical instructions, 3) establishment of survey and inspection methods, 4) procedure of erosion control works in urban living sphere, and 5) proactive countermeasures against sediment-related disaster caused by earthquakes.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.10a
• /
• pp.115-120
• /
• 1997

Environmental Product Life Cycle Management is an activity for defining and describing the product, process or activity environmentally. Especially, the main responsibility for the environmental impact of products lies in the design phase of product. Designers cany a heavy responsibility to determine technical, economic and ecological properties of the product. So in order to help designers, structured understanding and application of treating large amount of data and infonnation should be considered. This paper presents a methodological approach for decision supporting to build Product Life Cycle Management system and show a set of database modeling. Additionally, a key issue for databases is the quality of the provided information.

• Proceedings of the KSR Conference
• /
• 2007.11a
• /
• pp.129-134
• /
• 2007

When constructing a high-speed railroad, the reduction of the distance between track centers and the width of track bed may bring about the effect of cost savings. When, however, considering the influence that the increase of wind pressure due to the change of the distance between track centers may have on the stability of train operation, extensive technical review and overall studies need to be performed before the distance between track centers is determined. Therefore, in this study, the impact that the increase in wind pressure due to the change of aerodynamic phenomena with the change of the distance between track centers may have on two trains passing by each other was predicted, and the stability of train operation was analyzed in order to review the distance between track centers suitable to Honam HSR trains. In this study, we estimated the aerodynamical effects by the results of the real train experiments.

• Journal of the Korean Society for Heat Treatment
• /
• v.11 no.3
• /
• pp.200-206
• /
• 1998

The aim of this study is to investigate the effect of impurity level and fabrication processes on the strength, impact and fracture toughness of 7075, 7050 and 7175 aluminum alloy forgings. A specially processed 7175S-T74 aluminum forgings was superior to a conventionally processed 7075-T73, 7050-T74 and 7175-T74 aluminum forgings in both strength and toughness. The reduction of impurity level of iron and silicon has significantly diminished the size and volume fraction of second phase particles such as $Al_7Cu_2Fe$ and $Mg_2Si$. A further reduction of the amount of second phase particles has been observed by applying a special fabrication process. This phenomena result from the application of intermediate soaking at higher temperature and more sufficiant hot working temperature than that of a conventional processing.

• International Journal of Precision Engineering and Manufacturing
• /
• v.1 no.2
• /
• pp.84-93
• /
• 2000

Computer simulations of the mechanical behavior of 3 point bend specimens with a quarter notch under impact load are performed. This validity is found to be identified by the experimental proof. The cases with various loading rates applied at the side of the specimen are considered. An elastoplastic von Mises material model is chosen. Gap opening displacement, reaction force, crack tip opening displacement and strain rate are also compared with rate dependent material(visco-plastic material). The stability during various dynamic load can be seen by using the simulation of this study. These differences of the cases with various loading rates are also investigated.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1999.08a
• /
• pp.172-179
• /
• 1999

As the martensite structure cause fracture failure during drawing from 5.5mm rod to 3.05mm dia. wire without additional heat treatment, the optium cooling condition to inhibit the occurrence of martensite was investigated. In order to get SAE9254+V quality, the effects of alloying element, vanadium on the mechanical properties were investigated. Based upon CCT and TTT curves and the results form cooling test in mill, optimun cooling was found in the condition of the laying head temp of 780$^{\circ}C$ and of the conveyor speed at 0.15m/sec with the whole cover closed. The wire rods produced under the condition showed the best mechanical properties of 120kg/$\textrm{mm}^2$ in TS and 50% in RA, having an excellent drawability. In vanadium added steels, tensile strength was improved without degrading elongation and charpy impact value. That means the strengthening by vanadium is mainly due to the grain refinement by the fine precipitates during tempering process.

• Korean Journal of Applied Biomechanics
• /
• v.21 no.1
• /
• pp.97-105
• /
• 2011

The purpose of this study was to investigate the kinetic factors of Stefan holm's take-off motion and provide the technical data. Collected data of the subject(height: 181 cm, weight: 71 kg, record: 230 cm) were used for the last two strides and take-off phase. The results were as follows: The vertical impulse force was 2044.8 N which was 2.49 times and the anterior-posterior impulse force was -1306.4 N which was 1.88 times of the subject's weight. The take-off leg angular velocities($\omega_x,\;\omega_y$) were switched drastically from clockwise to count clockwise direction between two-step touchdown and take-off. The highest jerk of the take-off foot was 368.97 m/s3 during the two step take-off and the take-off foot made an impact to the ground with 1225.07 m/s3 during the one step touchdown.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1997.10a
• /
• pp.166-173
• /
• 1997

The present problem of this country building market in the face of 3D, in addition to a rise in construction cost, materials problems and opening a building market to foreign countries, is finding the efficient ways of overcoming these problems. So the efficacy of form work in technical improvement becomes important through scientific methods of the design and construction as advancement in th study of strength for Permanent form mortar is possible. According to the increment of polymer-cement ration, the degree of bending strength and compressive strength and impact strength increases. The optimum volume content of glass fiber seemed to be about 2.5% considering the distribution of glass fiber, workability and economy.

• Proceedings of the KIEE Conference
• /
• 1995.11a
• /
• pp.472-474
• /
• 1995

A Sputter ion Plating(SIP) system with a r.f. coil electrode and the Facing Target Sputter(FTS) source was designed for high-quality thin film formation. The rf discharge was combined with DC facing target sputtering in order to enhance ionization degree of a sputtered atoms. The energy of ions incident on the substrate depended on the health potential of DC biased substrate. The mean impact ion energy increased with negative bias voltage and rf power. The adhesive force of the TiN film formed was in the range of 30$\sim$50N, and markedly influenced by substrate bias voltage.