• Journal of the Korean Geotechnical Society
• /
• v.21 no.3
• /
• pp.159-168
• /
• 2005

In the previous studies, settlement behaviors of granular compaction piles have generally been analyzed with an evaluation of the settlement reduction factor based on tile load-sharing ratio and the replacement ratio. In this approach, however, since the reinforced ground with granular compaction piles is simplified as the composite ground, only the difference of a relative vertical strength between piles and soils is taken into account without reflecting lateral behaviors of granular compaction piles. In the companion research paper, the method of estimating the settlement of granular compaction piles was proposed by synthetically considering a vertical strength of the ground, lateral behaviors of granular compaction piles, the strength of pile materials, a pile diameter, and an installation distance of the pile. In the presented study, to validate a propriety of the previously proposed method, large scale field load tests and three dimensional numerical analyses are performed. The results are analyzed in detail and compared with the predicted settlements by the proposed method. Finally, a simple method to estimate the settlement of granular compaction piles is suggested for an easy application of the practical design.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.36 no.5
• /
• pp.402-407
• /
• 2010

Introduction: The planning of implant surgery is an important factor for the implant prosthesis. Stereolithographic (SLA) surgical stents based on a computer simulation are quite helpful for clinicians to perform the surgery as planned. Although many clinical and technical trials have been performed for computed tomography (CT)-guided implant stents to improve the surgical procedures and prosthetic treatment, there are still many problems to solve. We developed a system of a surgical guide based on 3 dimensional (3D) CT for implant therapy and achieved satisfactory results in the terms of planning and operation. Materials and Methods: Fifteen patients were selected and 30 implant fixtures were installed. The preoperative CT data for surgical planning were prepared after obtaining informed consent. Surgical planning was performed using the simulation program, Ondemend3D In2Guide. The stents were fabricated based on the simulation data containing information of the residual bone, the location of the nerve, and the expected design of the prostheses. After surgery with these customized stents, the accuracy and reproducibility of implant surgery were evaluated based on the computer simulation. The data of postoperative CT were used to confirm this system using the image fusion technique and compare the implant fixtures between the planned and implanted. Results: The mean error was 1.18 (${\pm}0.73$) mm at the occlusal center, 1.23 (${\pm}0.67$) mm at the apical center, and the axis error between the two fixtures was $3.25^{\circ}C$ (${\pm}3.00$). These stents showed superior accuracy in maxilla cases. The lateral side error at the apical center was significantly different from the error at the occlusal center but there were no significant differences between the premolars, 1st molars and 2nd molars. Conclusion: SLA surgical stents based on a computer simulation have the satisfactory accuracy and are expected to be useful for accurate planning and surgery if some errors can be improved.

• Journal of Radiation Protection and Research
• /
• v.22 no.2
• /
• pp.111-117
• /
• 1997

Recently, the conclusion of Comprehensive Test Ban Treaty(CTBT) is globally constructing a network system for nuclear test monitoring. The radionuclide experts of the Conference on Disarmament recommended that the detection of nuclear debris in the atmosphere was an essential factor of nuclear test monitoring and proposed the technical requirements. Based on those requirements, atmospheric radionuclide monitoring system to detect nuclear debris generated from the nuclear explosion test was composed. The system is comprised of high volume air sampler(HVAS), filter paper presser and high purity germanium detector(HPGe). Minimum detectable concentrations(MDCs) of the key nuclides requiring in CTBT monitoring strategies are determined by considering of decay time, counting time and flow rate of the high volume air sampler for the rapid explosion and the optimum measurement condition. The results were selected $10{\pm}$2h, $20{\pm}$2h and $850{\pm}50m^3$/h as parameters, respectively. The relation between the natural air-borne radionuclide concentration of $^{212}Pb$ and MDC were calculated which gave effect in the Compton continuum baseline due to those nuclides in the gamma-ray spectroscopy. These results can be used as an actually tool in the CTBT monitoring strategies.

• Korean Journal of Occupational Health Nursing
• /
• v.6 no.2
• /
• pp.156-167
• /
• 1997

In Korea, based on the Revised Law of Occupational Safety and Health a new entity of institution was set up in 1990 to provide occupational health services to SSE in which three sorts of personnel as a team have to be involved. These institutions, in charge of scores to hundreds of workplace area-wide, have been providing occupational health services without payment from employers or employees, and government reimburses through the Occupational Injury Prevention Insurance since 1993. As a service provider, a team is composed of doctors, nurses and industrial hygienists. Undergraduate and postgraduate educations for the SSE occupational health are not specified and the question on the performance of the personnel has been raised. This study was designed to analyze the facilitating factors of and barriers to the performance and its improvement of these personnel. In 1997, the survey was conducted with all 58 institutions. Structured questionnaires were mailed to 200 personnel who were providing the occupational health service for SSE. The response rate was 51.7% for doctors, 58.6% for nurses, and 60.3% for industrial hygienist, respectively. Results are as follows : 1) There is a guideline for occupational service mandated by the government. Under the guideline, the minimum frequency of visiting workplace is assured with six times of doctors, 17 times for nurse and industrial hygienist in a year. There are one doctor for every 200 factories, one nurse and one hygienist for every 100 factories. 2) All respondents have basic qualification for occupational health service. About 16.7%. of doctors are certified in industrial medicine or preventive medicine, and 64.7% of industrial hygienists had first grade certification. Totally 66.7% of personnel have been involved in occupational health for more than one year. 3) As a support system for the performance improvement, 66.3% respond that they have been provided with educational materials, advice related to industrial environment and guidance of MSDS from Korea Industrial Safety Corporation. Most respondents indicate the lack of concern of employers and employees as a main barrier to the improvement of the service. Also they are in the need of the training opportunity more focused on SSE. The Governments policy for SSE is a principal facilitating factor. Training program focused on SSE situation, manpower, technical support, etc. are areas to be improved to have a better occupational health service for SSE in Korea.

• Journal of Digital Convergence
• /
• v.13 no.4
• /
• pp.115-125
• /
• 2015

The purpose of this study is to empirically examines the effects of corporate sustainable management activities(social activity, economic activity, environmental activity) on the innovation activities(managerial innovation, technical innovation) in the convergence era. To accomplish these purposes, their relationships were modeled based on the previous studies conducted in the various areas. A total of 500 questionnaires were distributed to the employees working at the small & medium size companies. The statistical techniques such as descriptive analysis, reliability analysis, factor analysis, correlation analysis, multi regression analysis were used to evaluate the research model. The results of multi regression analysis show that all three aspects of corporate sustainable management activities have positively significant effects on the two factors of innovation. That is, if each activities of sustainable management works properly, it leads to create innovation. In addition, enterprises are needed to develop training programs or action planning that make the employees understands sustainable management well. Thus, the advanced level of corporate sustainability is expected if various sustainable management activities are performed in harmony with their innovation activities.

• Korean Journal of Health Education and Promotion
• /
• v.8 no.1
• /
• pp.68-86
• /
• 1991

This study was carried out to investigate consciousness level of physical exercise and analyze factors affection to the practice of exercise. The main purpose of the study was to give basic and necessary data in developing of program regarding to the physical exercise of the people and social athletics. This study was conducted by trained surveyers, for dweller in three cities(Seoul, Taegu and Ulsan) during January 4. 1990 to January 24. 1990. The results of this study can be summarized as follows 1. The subject of criticism an investigation for general charactristic be conducted in Seoul, Taegu and Ulsan city area an objective 417 person, 432 person and 366 person was among those comparatively little more by male was higher rate than female. Those in classification was adopted by age group 20 years old adult 41.3% of most higher rate, age group evaluation, were 24.9％ and other group were 18.4％ comprehensively appearanced by adult group has most many value rate. 2. An objective of investigation survey was made to personnel were comparative an educated level significantly higher such as college graduated 48.8％ this rate of value has most higher, High school graduated ; 30.1％ and middle School gratuated were 11.7％. In addition the native comes from large city, Farming and fishing villages an rural area rate were shown as 29.6％, 28.4% and 19.9% each other. There by classification of occupational job was shown by students has 27.4％ are most higher significantly, also there sales and service field job appearanced 15.1％ and expert technical job is 9.0% Although nonreligion person rate were 37.3%, buddist, Christianity, Roman Catholicism all them each other shown 33.6％, 16.7％ and 12.4%. An evaluation in economic situation value rate was appearanced by middle class level 61.7％ and higher and low level are 14.4％ and 23.9% with each other and married were 59.2％. 3. The people resident in cities area has pratice of health development by exercise person were 43.5% and value of rate for male has exercise practice is 52.5％, was significantly higher than female has by age group 10 years old and age group 50 years old is 52.6％ and 47.3％ was comparative higher rate also age group 30 is 35.1％ of low factor was indicated. Although evaluated an economic situation rate was higher level get more taken the practice of health develop exercise(higher level 60.0％ and low level is 32.9％). Although by higher level of educated were more taken pratice of their proper physical exercise(college graduated rate ; 52.2％ of most higher and high school graduted ; 39.7％ and then middle school graduated is 19.1％) unmarried taken exercise rate ; 48.4％ is significantly higher than married person rate ; 40.8％. Although objective of native area of exercise rate of Urban area cities ; 52.5％ are significantly higher farming and fishing native person rate ; 40.4％ shown is most low.

• Korean Journal of Construction Engineering and Management
• /
• v.16 no.4
• /
• pp.118-128
• /
• 2015

Recently BIM technology has been expanded for using in construction project. Due to the high-cost of BIM infrastructure development, lack of regulations, lack of process and so forth, usage of BIM has been delayed than initial expectations. In design phase, especially, collaboration based on BIM system has been a key factor for successful next generation building project. Through the analysis of current research trends about IT technologies, virtualization and BIM service, data exchange such as drawings, 3D model, object data, properties using cloud computing and virtual server system is defined as a most successful solution. The purpose of this study is to enable the cloud computing BIM server to provide several main functions such as editing models, 3D model viewing and checking, mark-up and snapshot in high-performance quality by proper design of VDI system. Concurrent client connection performance is a main technical index of VDI. Through testing of test-bed server client, developed VDI system's multi-connect control is evaluated. Performance-test result of BIM server VDI effect to development direction of cloud computing BIM service for commercialization.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.16 no.1
• /
• pp.36-41
• /
• 1987

In the refrigerated storages of fishery products, the lipid oxidation of the meats had been the major deterioration factor. For the effective utilization of mackerel, Scomber japonicus, and yellow corvenia, Pseudosciaena manchuria, which are major costal fish in Korea, and were studied about oxidative rancidity during the refrigerated storage at $-18^{\circ}C$ and the effect of different temperatures upon the cooked meat. We detected the results followed. 1. The Induction period of refrigerated storages had 20 days for fresh meat and 60 days for cooked meat. 2. Peroxide and TBA value of cooked meats had half amount values In the comparison with those of fresh meats, 3. Values of mackerel had double amount than those of yellow corvenia in peroxide and TBA value as if the different values come from different fish species, 4. The rancidative degree of the different temperatures on the samples had the least amount at $-5^{\circ}C$ among several kinds of storage temperatures.

• Journal of Microbiology
• /
• v.44 no.1
• /
• pp.64-71
• /
• 2006

To investigate the effects of the nucleotide sequences in Shine-Dalgarno (SD) and the spacer region (SD-ATG) on bovine growth hormone (bGH) gene expression, the expression vectors under the control of the T7 promoter (pT7-7 vector) were constructed using bGH derivatives (bGH1 & bGH14) which have different 5'-coding regions and were induced in E. coli BL21 (DE3). Oligonucleotides containing random SD sequences and a spacer region were chemically synthesized and the distance between the SD region and the initiation codon were fixed to nine bases in length. The oligonucleotides were annealed and fused to the bGH1 and bGH14 cDNA, respectively. When the bGH gene was induced with IPTG in E. coli BL21(DE3), some clones containing only bGH14 cDNA produced considerable levels of bGH in the range of $6.9\%\;to\;8.5\%$ of total cell proteins by SDS-PAGE and Western blot. Otherwise, the bGH was not detected in any clones with bGH1 cDNA. Accordingly, the nucleotide sequences of SD and the spacer region affect on bGH expression indicates that the sequences sufficiently destabilize the mRNA secondary structure of the bGH14 gene. When the free energy was calculated from the transcription initiation site to the +51 nucleotide of bGH cDNA using a program of nucleic acid folding and hybridization prediction, the constructs with values below -26.3 kcal/mole (toward minus direction) were not expressed. The constructs with the original sequence of bGH cDNA also did not show any expression, regardless of the free energy values. Thus, the disruption of the mRNA secondary structure may be a major factor regulating bGH expression in the translation initiation process. Accordingly, the first stem-loop among two secondary structures present in the 5'-end region of the bGH gene should be disrupted for the effective expression of bGH.

• Journal of Broadcast Engineering
• /
• v.12 no.2
• /
• pp.80-92
• /
• 2007

IPTV Services that is representative union service of broadcasting and telecommunication need guarantee of QoS, efficiency of multicasting, and hish bandwidth on the network. Because typical TDM based metro transport network was designed by transporting fixed voice traffic with stable and recovering method, it has a defect of bottleneck and a waste of bandwidth for acceptance of data traffic with burst feature and then all of data are treated equally at the transport network because it cannot classify between advanced high end service and best effort low end service. for completely resolving this kind of problem about increasing burst traffic and QoS issues, firstly we need to new design for transport network. This paper presents transformation method from TDM based metro transport network to packet based transport network and advantage and effectiveness of packet based transport network and also indicates technical factor and characters about method of packet transport system. As a result of research, the Packet Transport System, which is a transmission network for packet delivery, take in not only a specific character of legacy TDM but QoS, Multicast and high bandwidth, then, it is able to keep an effective bandwidth and a stabilized performance of packet transmissions. Additionally, if a fault be occurred on an optical link, the system is able to guarantee a differential QoS by an each service class using an algorithm to make certain of a traffic existence and contain a protective mechanism.