• Journal of Korean Society for Geospatial Information Science
• /
• v.20 no.4
• /
• pp.67-75
• /
• 2012

For the last few years, LBS has attracted considerable attention from many industries and societies as a result of propagated smart devices. LBS has a high utilization of mobile users as it uses user positions as a significant factor. Current LBS has only taken user position into account and it makes some limits. So, it is necessarily suggested that support for personalized services which consider user's motion, traffic condition, weather condition, time, personal information and preferences that have a huge impact on the accuracy. The purpose of this study is to design the inference systems with user's motion, preferences and schedules and provide users with the personalized information. To achieve this, Movement Ontology, User Profile Ontology, Schedule Ontology and Work Ontology should be constructed and based on this, smart applications were developed. Developed applications induced appropriately recommended results according to user's preference, motion and directions.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.21 no.4
• /
• pp.365-373
• /
• 2008

Fiber Reinforced Polymer, FRP has a light weight, a high tensile strength based on design, non-electronic, non-magnetic, and rust-resistant feature, etc and many researches are being conducted recently on FRP in the construction area. Among them, GFRP (Glass Fiber Reinforced Polymer) is excellent in price competitiveness and is widely being used. However, since GFRP has a relative low modulus of elasticity and causes excessive deflection, the section must be large to be used as a structural component and an investigative review must be carried out in design to set the limit for deflection by the use load. Therefore, in order to solve the mentioned technical problems, this study suggested a section of a module form such that application of a large-scale section is possible. Also, to secure the low rigidity of FRP, this study developed a new FRP+ concrete composite girder form that confined the concrete. To identify the structural movement of the developed FRP+ concrete composite girder, shear strength test was carried out.

• Wind and Structures
• /
• v.21 no.5
• /
• pp.565-595
• /
• 2015

In recent years, high-rise buildings received a renewed interest as a means by which technical and economic advantages can be achieved, especially in areas of high population density. Taller and taller buildings are being built worldwide. These types of buildings present an asset and typically are built not to fail under wind loadings. The increase in a building's height results in increased flexibility, which can lead to significant vibrations, especially at top floors. Such oscillations can magnify the overall loads and can be annoying to the top floors' occupants. This paper shows that increased stiffness in high-rise buildings may not be a feasible solution and may not be used for the design for comfort and serviceability. High-rise buildings are unique, and a vibration control system for a certain building may not be suitable for another. Even for the same building, its behavior in the two lateral directions can be different. For this reason, the current study addresses the application of hybrid tuned mass and magneto-rheological (TM/MR) dampers that can work for such types of buildings. The proposed control scheme shows its effectiveness in reducing floors' accelerations for both comfort and serviceability concerns. Also, a dissipative analysis carried out shows that the MR dampers are working within the possible range of optimum performance. In addition, the design loads are dramatically reduced, creating more resilient and sustainable buildings. The purpose of this paper is to stimulate, shape, and communicate ideas for emerging control technologies that are essential for solving wind related problems in high-rise buildings, with the objective to build the more resilient and sustainable infrastructure and to optimally retrofit existing structures.

• Korean Institute of Interior Design Journal
• /
• v.21 no.5
• /
• pp.254-263
• /
• 2012

This study found out the change of spacial form of detached house in Korea on a 10-year basis from 1980s though analysis on the architecture of each period. For the subject houses of this study, the detached houses introduced repeatedly as excellent cases in technical journals for architecture were collected among those completed by architects who designed numerous houses and a survey was conducted on 18 detached houses of 18 architects among the in urban style houses in Seoul and suburban style houses in the suburbs of Seoul. Through this study, it could be found that, as the morphological application of traditional architecture was settled with spatial concept, the external spatial form of the detached houses in Korea after 1980s was changed to westernized form but the internal spacial form had been continuously changing suitable to our emotion by reflecting the living habit and taste with the traditional attitude to perceive and accept the nature. As for the change in the forms of interior space, vertical space with more than two floors became common. Front porch and stair hall, which were located at the center of a house and became an important spacial element that overlapped family's moving line, changed to open and bright space that used transparent glass and increased the space to contact the open air, reflecting our living habit and taste that preferred the feeling of internal openness. A Private space, main room, was more segmented and luxurious, and a public space, living room, secured the independency by getting close to symbolic yard. As for the change in the form of exterior space, the form of façade window has been changing in its location and size and brought free images due to the advancement of technology and material. The shape of roofs was borrowed from western style and a lot of geometrical forms that break away from the concept of angle rater and eaves are appearing.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.44 no.1
• /
• pp.60-70
• /
• 2021

Recently, with the development of technologies for the fourth industrial revolution, convergence and complex technology are being applied to aircraft, electronic home appliances and mobile devices, and the number of parts used is increasing. Increasing the number of parts and the application of convergence technologies such as HW (hardware) and SW (software) are increasing the No Defect Found (NDF) phenomenon in which the defect is not reproduced or the cause of the defect cannot be identified in the subsequent investigation systems after the discovery of the defect in the product. The NDF phenomenon is a major problem when dealing with complex technical systems, and its consequences may be manifested in decreased safety and dependability and increased life cycle costs. Until now, NDF-related prior studies have been mainly focused on the NDF cost estimation, the cause and impact analysis of NDF in qualitative terms. And there have been no specific methodologies or examples of a working-level perspective to reduce NDF. The purpose of this study is to present a practical methodology for reducing NDF phenomena through data mining methods using quantitative data accumulated in the enterprise. In this study, we performed a cluster analysis using market defects and design-related variables of mobile devices. And then, by analyzing the characteristics of groups with high NDF ratios, we presented improvement directions in terms of design and after service policies. This is significant in solving NDF problems from a practical perspective in the company.

• International conference on construction engineering and project management
• /
• 2009.05a
• /
• pp.1300-1306
• /
• 2009

If a brief direction and plan for a remodeling project are decided, it may moves to a concrete design step of which to select the most suitable alternative out of applicable compounding devices to reveal dynamic drifting performance. However, the volume of knowledge baseed utility which can refer to systematic evaluation regarding remodeling element technology and the accumulation of realistic cases are not only sufficient, but also short including its system for expression and consistency. Therefore, it may necessary to deliver the main frame which make enables the Owner, designer and builder to get performance technology for applying advanced remodeling element and knowledge based utility. There is a necessity to provide an information with latest made by virtue of modeling in the 3D/4D based on construction-based knowledge etc. which we can use for life cycle of a project, as a prominent way of knowledge based utility. Then, it is sure that remodeling can become more activative by sharing of knowledge based utility formed in electronic 3D/4D which is a systematic and expressed consistently to a performance and applicability in preservation of savings. It is expected for modeling of the 3D/4D in knowledge based utility enables to verify the practicability of each technology on effective application, and the use of technology might be spread widely due its obvious and oriented expressions. Further, this knowledge based utility formed in electronic 3D/4D may applicable for VE process in addition to remodeling design fields.

• Archives of design research
• /
• v.18 no.1 s.59
• /
• pp.49-58
• /
• 2005

Focusing on the information sender, message, channel, and receiver, the existing information theory deals with the noise, information contents, and probability of choice, which involve in the process of information transmission. In the current digital environment, besides simply conveying information itself through media, the important issue is how to efficiently convey information. Therefore, we need to analyze the theory in different perspective, and to research the Information redundancy for the methodology of information design. The redundancy causes the receiver to have attraction to the information and to reduce its contents due to its supplement and repetition. So it can play a role of efficient communication method. The concept of redundancy is applied to the communication of art such as literature, architecture, painting, and design to accomplish efficient communication. In order to get persuasive information design for the receiver's perspective we need to make use of this concept. The redundancy can be applied with the technical aspect of multimedia and Interaction, which add supplemental expression, or sort of event for the receiver's experience and memory. In the process of constructing information it can be applied with the structure of gaming redundancy, entropy, the accumulating communication code using entertaining feature, and storytelling methodology. The noise and entropy could be used for the means of making redundancy, not the obstacle to information. The redundancy gives the receiver attraction on the information and makes them have strong will of interpreting it so that the purpose of conveying information will be accomplished efficiently.

• 대한공업교육학회지
• /
• v.44 no.2
• /
• pp.1-27
• /
• 2019

In recent years, space planning ability using 3D sketch software is required in the working field of interior design. However, vocational high school do not respond appropriately to changes in the industry, because the class of vocational high school consists of hands-on practical classes and 2D CAD based classes. There is a shortage of 3D sketch software-based instruction programs that can improve students' spatial planning skills. Therefore, this study is to develop instruction program using 3D sketch software for 'Planning for Residential Space' unit of NCS-based on interior design subject and to find out the effect on students' academic achievement by applying to vocational high school class. The 3d sketch software based instructional program developed in this study was developed through four stages of preparation, development, implementation and evaluation according to the PDIE model process. The experimental design model used nonequivalent group posttest-only design in this study. Experiments were conducted on vocational high school students in construction and 9 hours of interior design subjects were applied. After the experiments, students were tested for academic achievement in the cognitive, affective, and psychomotor areas. As a result, the instruction program using the 3d sketch program developed in this study was found to be more effective in improving students' academic achievement than existing manual instruction program in both cognitive, affective, and psychomotor areas.

• Journal of Korea Water Resources Association
• /
• v.51 no.7
• /
• pp.543-554
• /
• 2018

A methodology has been presented for evaluating the partial safety factors on the sliding failure mode of vertical caissons of composite breakwaters and for determining the cross sections of those by Level I reliability-based design method. Especially, a mathematical model has been suggested for the sake of a consistency of code format as well as convenience of application in practical design, for which the uncertainties associated with buoyancy and its own weight can be taken into account straightforwardly. Furthermore, design criteria equation has been derived by considering accurately the effect of uplift pressure, so that the cross sections of caissons can be assessed which must be safe against the sliding failure. It has been found that cross sections estimated from partial safety factors proposed in this paper are in very good agreement with the results of Level II AFDA and Level III MCS under the same target probability of failure. However, partial safety factors of the Technical Standards and Commentaries for Port and Harbour Facilities in Japan and Coastal Engineering Manual in USA tend to estimate much bigger or smaller cross sections in comparison to the present results. Finally, many reliability re-analyses have been performed in order to conform whether the stability level of cross section estimated by Level I reliability-based design method is satisfied with the target probability of failure of partial safety factors or not.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.15 no.4
• /
• pp.104-113
• /
• 2012

Followed by that HTML5(Hypertext Markup Language5) was introduced, many kinds of program and services based on this have been developed and released. HTML5 is technical standard specifications for cross platform for personal computers and mobile devices so that it is expected that continuing progress and wide application in the both sides of the academic and the industrial fields increase. This study is to design and implement a mobile application program for overlay rendering with DEM and other geo-based image sets using HTML5 WebGL for 3D graphic processing on web environment. Particularly, the blending technique was used for overlay processing with multiple images. Among available WebGL frameworks, CubicVR.js was adopted, and various blending techniques were provided in the user interface for general users. For the actual application in the study area around the Sejong city, serveral types of geo-based data sets were used and processed: KOMPSAT-2 images, ALOS PALSAR SAR images, and grid data by environment measurements. While, DEM for 3D viewing with these geo-based images was produced using contour information of the digital map sets. This work demonstrates possibilities that new types of contents and service system using geo-based images can be extracted and applied.