• Journal of the Korea Society of Computer and Information
• /
• v.13 no.2
• /
• pp.67-78
• /
• 2008

The purpose of this paper is to discuss the design and implementation of a WCBT(Web and Computer based Test). The WCBT combines the strengths of both a WBT(Web-based test) and a CBT(Computer-based test) on the basis of efficiency and stability. The current assessment system, considered an important management tool in the construction and operation of a total management system for the national technical qualification, has some unstable elements with regard to system load and stability. The proposed system's technological aspects have been tested through a basic simulation pilot program. The pilot program will be expanded to include the local Chamber of Commerce and Industry because the stability of the system was proved through its application to the real-time national technical examination of KCCI (Korea Chamber of Commerce and Industry). The WCBT system has shown great efficiency in terms of system load, and has solved frequent communication problems which have occurred through the use of foreign qualifying examinations. The server and client systems of the WCBT have been given good evaluations with regard to the convenience of their use and the management system for operators and supervisors.

• Journal of the Korea Society of Computer and Information
• /
• v.27 no.6
• /
• pp.77-86
• /
• 2022

Recently, various cryptocurrencies (coins) based on block chains have appeared, and interest in privacy coins, which is an anonymity-based cryptocurrency that values personal information protection, is growing. In this paper, we look at coin abuse cases using privacy coins, and analyze the technology that guarantees the anonymity of 8 mainly traded privacy coins (Monero, Dash, Zcash, BEAM, Grin, Horizen, Verge, and Pirate Chain). We would like to analyze the applied technologies for We present the problems that can occur in these privacy coins, check the technology and each element applied to the privacy coin, and analyze the technical difficulty of the anonymity guarantee technology for the mainly traded coins through this, and Appropriate countermeasures and classification of privacy coins for technical difficulty were presented through the problem. Through this, the standard for re-evaluating the value of the coin according to the application of appropriate technology for the privacy coin can be presented.

• Journal of the Korea Society of Computer and Information
• /
• v.29 no.4
• /
• pp.23-30
• /
• 2024

In this paper, we propose a deep learning-based personalized senior care service application. The proposed application uses Speech to Text technology to convert the user's speech into text and uses it as input to Autogen, an interactive multi-agent large-scale language model developed by Microsoft, for user convenience. Autogen uses data from previous conversations between the senior and ChatBot to understand the other user's intent and respond to the response, and then uses a back-end agent to create a wish list, a shared calendar, and a greeting message with the other user's voice through a deep learning model for voice cloning. Additionally, the application can perform home IoT services with SKT's AI speaker (NUGU). The proposed application is expected to contribute to future AI-based senior care technology.

• Journal of the Ergonomics Society of Korea
• /
• v.32 no.3
• /
• pp.279-291
• /
• 2013

Objective: The aim of this study was to compare old standard EN 954-1 and new standard EN ISO 13849-1 through case study and provide necessity of adaptation of EN ISO 13849-1 in Korea. Background: International and EU harmonized standard EN ISO 13849 "safety of machinery - Safety-related parts of control system" is classified into Part 1: General principles for design and Part 2: Validation. EN ISO 13849-1 standard was introduced in Official Journal of the European Union on September 8, 2009 as harmonized standard, and old standard EN 954-1 was withdrawn on December 31, 2011. So, EU decided to use of EN ISO 13849-1 standard forcibly from January 1, 2012 for safety of machinery. New machines need to be CE marked if they are to be placed on the market in the European Economic Area(EEA), Switzerland or Turkey, and Korean machine builder should apply EN ISO 3849-1 standard for safety of machinery accordingly. However, current Korean Safety Certification system(KCs mark) for dangerous machinery is not referred to EN ISO 13849-1 standard as safety standard. There is a need of research for adaptation of EN ISO 13849-1 standard in Korea as safety standards for new design of safety-related control system which use mostly electronic components. Method: Five case studies of representative designs for safety-related control system in accordance with EN 954-1were selected according to safety category from B to 4. And these five representative designs were tried to change new design in accordance with EN ISO 13849-1 standard. The results of comparison were analyzed in aspect of economy and technical complexity. Results: The results showed that EN ISO 13849-1 provided quantitative method of application and it enabled designers to create safety-related control systems that require fewer components and less wiring, with many of the components being to a lower specification and, therefore, less costly. Conclusion: EN ISO 13849-1 standard is good for electronic safety-related control systems compare to EN 954-1. By considering the importance of application of EN ISO 13849-1 and benefits, the application of EN ISO 13849-1 as safety standard for safety of machinery is urgent in Korea. Application: The results of comparing EN 954-1 and EN ISO 13849-1 standard might help to determine the adaptation of EN ISO 13849-1 standard for safety of industrial machinery in Korea.

• Archives of design research
• /
• v.19 no.2 s.64
• /
• pp.129-138
• /
• 2006

Design securing a dominant position currently in the global market has shown inherent culture of each country, i.d. national disposition. For instancess, there are Scandinavia emphasizing humanism, America adopting pragmatism, Germany reflecting the rational principle, Spain reflecting the daily an, Italian design being rationalism and impressionism. The members of society shall be under the control of the already formed social-cultural value and character. So culture shall restrict the internal manner of social behaviour and apply pressure to the action of main body. Also culture shall be under the control of social environment and each culture shall be materialized as per the disposition of the members of society. Now korean design has been attracted lots of interests and attention from global market because it is excellent in the aspect of application capability for new technology and also suggests the image of design produced through them. Now Korean design shall run side by side the application for formative element to be recognized by technical design as well as korean identity. So dear definition for national and cultural disposition shall be required to korean design education and design development. These prescribed efforts shall be a shortcut for globalization of korean design.

• Journal of Institute of Control, Robotics and Systems
• /
• v.12 no.4
• /
• pp.405-410
• /
• 2006

This paper presents the design of a USB home controller and a home control system that specially is focused on controlling home appliances as a part of home network systems, the implementation of the USB device access class in an OSGi service platform and a home security system as an application. Designed USB home controllers are able to control various home appliances. They can be used not only to control big home appliances like a boiler but also to control small home appliances like a toaster because they are low-cost solutions. The USB home controller supports real time control using the interrupt transfer of the USB specification. And It is easy to use by homemakers who have no technical knowledge of the system because they just plug and unplug it in a home server then it automatically joins and leaves a home control system. This technique is based on hot-plug and the USB Device Access class in an OSGi Service Platform. The USB Device Access class supports the coordination of automatic detection and attachment of the USB home controller on an OSGi Service Platform, and it downloads and installs device drivers on demand. For an application, we implemented and tested a home security system using two USB home controllers and a CDMA module.

• Proceedings of the IEEK Conference
• /
• 2005.11a
• /
• pp.1201-1204
• /
• 2005

Whereas conveniences deriving from the development of information and telecommunication technology increase, information outflow and illegal data use are also rapidly on the rise. Consequently, many studies to prevent illegal information outflow are currently under way, and the use of Smart Card is in steep jump. Recently, Java Card is diffused fast as an alternative to complement the technical problems of the Smart Card. This paper designed and materialized the system for multi-users authentication and file access control by user through designing a Java Card applet that is used for information protection and in various application fields. For allowing a file access competence, each user's file access competence is processed via drawing up the access condition table in the applet. Therefore, illegal correction, exposure and destruction of information, which become the concerns when multi-users have an access, can be prevented. In addition, its application becomes possible in the system requiring multi-users certifications.

• Progress in Superconductivity
• /
• v.11 no.1
• /
• pp.36-41
• /
• 2009

Superconducting quantum phenomena are getting attention from the field of metrology area. Following its first successful application of Josephson effect to voltage standard, piconewton force standard was suggested as a candidate for the next application of superconducting quantum effects in metrology. It is predicted that a micron-sized superconducting Nb ring in a strong magnetic field gradient generates a quantized force of the order of sub-piconewtons. In this work, we studied the design and fabrication of Nb superconducting quantum interference device (SQUID) on an ultra-thin silicon cantilever. The Nb SQUID and electrodes were structured on a silicon-on-insulator (SOI) wafer by dc magnetron sputtering and lift-off lithography. Using the resulting SOI wafer, we fabricated V-shaped and parallel-beam cantilevers, each with a $30-{\mu}m$-wide paddle; the length, width, and thickness of each cantilever arm were typically $440{\mu}m,\;4.5{\mu}m$, and $0.34{\mu}m$, respectively. However, the cantilevers underwent bending, a technical difficulty commonly encountered during the fabrication of electrical circuits on ultra-soft mechanical substrates. In order to circumvent this difficulty, we controlled the Ar pressure during Nb sputtering to minimize the intrinsic stress in the Nb film and studied the effect of residual stress on the resultant device.

• IE interfaces
• /
• v.17 no.1
• /
• pp.128-141
• /
• 2004

Although a number of container terminal simulators have been developed for various purposes, none of the existing simulators allow the system structure to reuse the system structure depending on application. Our goal is to develop highly reusable, highly inter-operable and flexible container terminal simulation system. The High Level Architecture(HLA) is an architecture for reuse and inter-operation of simulation. It is based on premise that no simulation can satisfy all use and users. An individual simulation or set of simulations developed for one purpose can be applied to another application under the HLA concept of the federation : a composable set of interacting simulations. The intent of the HLA is a structure which will support reuse of capabilities available in different simulations, ultimately reducing the cost and time required to create a synthetic environment for a new purpose, and the possibility of distributed collaborative development of complex simulation applications. In this paper, we discuss the design of a HLA-based port container terminal simulation system. Furthermore, we describe various technical motivations for HLA, the key elements of the architecture and how they are minimum and essential to the goal of reuse and interoperability.

• Journal of Power Electronics
• /
• v.9 no.3
• /
• pp.464-471
• /
• 2009

This paper introduces a new Motion-$SPM^{TM}$ (Smart Power Modules) module in Single In-line Package (SIP), which is a fully optimized intelligent integrated IGBT inverter module for up to 1kW low power motor drive applications. This module offers a sophisticated, integrated solution and tremendous design flexibility. It also takes advantage of pliability for the arrangement of heat-sink due to two types of lead forms. It comes to be realized by employing non-punch-through (NPT) IGBT with a fast recovery diode and highly integrated building block, which features built-in HVICs and a gate driver that offers more simplicity and compactness leading to reduced costs and high reliability of the entire system. This module also provides technical advantages such as the optimized cost effective thermal performances through IMS (Insulated Metal Substrate), the high latch immunity. This paper provides an overall description of the Motion-$SPM^{TM}$ in SIP as well as actual application issues such as electrical characteristics, thermal performance, circuit configurations and power ratings.