• Journal of the Korean Society of Safety
• /
• v.11 no.4
• /
• pp.90-96
• /
• 1996

This paper examines the De-inking characteristics of mechanical methods using the newly developed De-inking machine along with experiments to enhance the manufacture of recycled kraft pulp with the addition of newspaper. This study concluded that : First, the De-Inking ratio was affected by shear stress and friction resistance operating In the stainless steel net. Second, the brightness improvement ratio was raised by 6.2% under the following conditions : 120rpm rotor speed, 2.18% concentration, using two treatment cycles. Third, it was shown that the tearing strength was improved by about 10 to 20% , and the tensile strength remained the same when recycled kraft pulp was added with 20% wasted paper. In sum, by these experiments we have proven that the performance of the newly developed De-inking machine can be improved.

• Journal of Chest Surgery
• /
• v.23 no.3
• /
• pp.556-560
• /
• 1990

A 22 year old soldier was discovered on routine study for discharge to have a mass in the posterior mediastinum He was admitted due to high fever and improved by antibiotic treatment for 2 weeks. Chest PA, apicogram, myelogram and CT scan demonstrated enlargement of the neural foramen at the T1 level with erosion of the posterior aspect of the vertebral body and the pedicle contiguous with the intrathoracic mass, A myelogram showed a large extradural defect at the T1 level on the left. There were no clinical signs of cord compression. A standard posterolateral thoracotomy incision was made with extension to high thoracic vertebra. The 3rd rib was resected and the angles of the posterior portion of 1st and 2nd ribs were cut and rib heads were removed. Extrapleural neurilemmoma 6x6 cm was resected intrathoracically. And after removal of the pedicle and the lamina, intraspinal extradural mass 3 X 2 cm was resected carefully with trivial tearing of the dura which was sealed with gel-foam and pleura. There was ma postoperative neurological complication.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.11
• /
• pp.148-157
• /
• 1999

The objective of this study is to investigate the effect of three main chemical compositions(Mg, Zn, Si) on extrudability of 7xxx Al alloy with high tensile strength. A few Al alloys based on 7xxx alloys were metal mold cast with various weight*%) of Mg 0.3-1.2%, Zn 5.0-8.0% and Si 0.4-0.7%, to envestigate the effects of extrudability, as well as mechanical properties. To measure the extrudability of cast billets, maximum extrusion pressure and surface temperature at die exit before tearing occurs were obtained by experiment and simulation of thermo-viscoplastic F.E.M. Also the yield and tensile strength of extruded products were tested.

• Journal of the Korean Society for Heat Treatment
• /
• v.6 no.3
• /
• pp.159-165
• /
• 1993

Creep tests of the TiC particulate reinforced Al composite have been conducted in the temperature ranges from 200 to $500^{\circ}C$. The steady-state cree rate of the composite depended strongly on the temperature and ap' plied stress. The stress exponent for the steady state creep rate of the composites was approximately 17.5 and the activation anergy was calculated to be 390KJ/mol. The steady-state creep equation could be written as $\acute{\varepsilon}_{ss}$ $$(s^{-1})=1.5{\times}10^{-9}\;{\sigma}^{17.5}\exp(-390000/RT)$$. Fracture surface examination showed that the fracture mode of the particulate reinforced composite was ductile by plastic tearing of the aluminum matrix and TiC particle interfaces were offered as sites for crack.

• Journal of Korea Society of Industrial Information Systems
• /
• v.5 no.3
• /
• pp.71-76
• /
• 2000

An enterprise resource planning(ERP) system is an enterprisewide management system made possible by information technology. Organizations have been implementing ERP packages for integrating the business processes in various functions. ERP has been helping companies to automate their entire business processes within the organization as a whole instead of just in sun functional units. This paper discusses the difficulties in the implementation process of ERP. Integration of core business processes throughout the supply chain; Tearing down of functional boundaries; Emergence of information technology as a process enabler.

• The Journal of Korean Physical Therapy
• /
• v.32 no.6
• /
• pp.391-393
• /
• 2020

Objectives: We investigated injury of corticostriatal (CStr) tract in patient with mild traumatic brain injury (mTBI), which was demonstrated by DTT. Method: A 44-year-old female with no previous history of neurological, physical, or psychiatric illness had suffered from head trauma resulting from a pedestrian car accident. She complained that could not quickly move the left hand with her intension. After three month's administration, her slowness movement of left hand recovered rapidly to the point that she was able to extend all fingers quickly. Results: On DTT configuration, the integrity of the left CStr tract was well-preserved, however the right CStr tract showed narrowing and partial tearing in the subcortical white matter on a DTT at 25 months after onset. Conclusion: Injury of the right CStr tract was demonstrated in a patient who developed mild motor control problems following mild TBI. We believe that the evaluation of the CStr tract from the secondary motor area for patients who showed unexplained motor control problem is necessary.

• Archives of Craniofacial Surgery
• /
• v.20 no.4
• /
• pp.219-222
• /
• 2019

The purpose of this study is to discuss several approaches to addressing naso-orbito-ethmoidal (NOE) fracture. Orbital fracture, especially infraorbital fracture, can be treated through the transconjunctival approach easily. However, in more severe cases, for example, fracture extending to the medial orbital wall or zygomatico-frontal suture line, only transconjunctival incision is insufficient to secure good surgical field. And, it also has risk of tearing the conjunctiva, which could injure the lacrimal duct. Also, in most complex types of facial fracture such as NOE fracture or panfacial fracture, destruction of the structure often occurs, for example, trap-door deformity; a fracture of orbital floor where the inferiorly displaced blowout facture recoils to its original position, or vertical folding deformity; fractured fragments are displaced under the other fragments, causing multiple-packed layers of bone.

• Korean Journal of Mathematics
• /
• v.31 no.4
• /
• pp.419-431
• /
• 2023

In this paper, we propose an iterative method for a symmetric interior penalty Galerkin method for heterogeneous elliptic problems. The iterative method consists mainly of two parts based on a non-overlapping domain decomposition approach. One is an intermediate preconditioner constructed by understanding the properties of the discontinuous finite element functions and the other is a preconditioning related to the dual-primal finite element tearing and interconnecting (FETI-DP) methodology. Numerical results for the proposed method are presented, which demonstrate the performance of the iterative method in terms of various parameters associated with the elliptic model problem, the finite element discretization, and non-overlapping subdomain decomposition.

• Journal of Korean Neurosurgical Society
• /
• v.49 no.6
• /
• pp.355-358
• /
• 2011

Objective : Subdural hygroma (SDG) is a complication occurring after head trauma that may occur secondary to decompressive craniectomy (DC). However, the mechanism underlying SDG formation is not fully understood. Also, the relationship between the operative technique of DC or the decompressive effect and the occurrence and pathophysiology of SDG has not been clarified. Purpose of this study was to investigate the risk factors of SDG after DC in our series. Methods : From January 2004 to December 2008, DC was performed in 85 patients who suffered from traumatic brain injury. We retrospectively reviewed the clinical and radiological features. For comparative analysis, we divided the patients into 2 groups : one group with SDG after craniectomy (19 patients; 28.4% of the total sample), the other group without SDG (48 patients; 71.6%). The risk factors for developing SDG were then analyzed. Results : The mean Glasgow Outcome Scale (GOS) scores at discharge of the groups with and without SDG were 2.8 and 3.1, respectively (p<0.0001). Analysis of radiological factors showed that a midline shift in excess of 5 mm on CT scans was present in 19 patients (100%) in the group with SDG and in 32 patients (66.7%) in the group without SDG (p<0.05). An accompanying subarachnoid hemorrhage (SAH) was seen in 17 patients (89.5%) in the group with SDG and in 29 patients (60.4%) in the group without SDG (p<0.05). Delayed hydrocephalus accompanied these findings in 10 patients (52.6%) in the group with SDG, versus 5 patients (10.4%) in the group without SDG (p<0.05). On CT, compression of basal cisterns was observed in 14 members (73.7%) in the group with SDG and in 18 members of the group without SDG (37.5%) (p<0.007). Furthermore, tearing of the arachnoid membrane, as observed on CT, was more common in all patients in the group with SDG (100%) than in the group without SDG (31 patients; 64.6%) (p<0.05). Conclusion : GOS showed statistically significant difference in the clinical risk factors for SDG between the group with SDG and the group without SDG. Analysis of radiological factors indicated that a midline shifting exceeding 5 mm, SAH, delayed hydrocephalus, compression of basal cisterns, and tearing of the arachnoid membrane were significantly more common in patients with SDG.

• Journal of Welding and Joining
• /
• v.15 no.1
• /
• pp.92-100
• /
• 1997

Weld repair of ASTM A-470 class 8 high pressure (HP) steam turbine rotor steel has been performed to extend the service life of older fossil units. Microhardness measurements were conducted across the weldment from unaffected base metal (BM) to weld metal (WM). The hardness of the BM was VHN 253, however it dropped up to VHN 227 at the heat affected zone (HAZ) close to unaffected BM for multipass SAW. This area of hardness drop is called "siftening zone" and has a width of 0.5-0.6mm. During creep rupture test, failure occurred around the softening zone and rupture time was 772.4hr at 19Ksi (132 Mpa) and 593.deg. C. Multipass MIG and TIG welding have been employed to reduce the softening zone width. The softening zone width for MIG was 0.3-0.4mm and for TIG was zero-0.4mm depending on heat inputs. However creep rupture time was decreased as softening zone width reduced. Creep rupture time also showed a close relationship with heat inputs in TIG process. The higher heat input, the longer rupture time. Most failure occurred at intercritical HAZ (ICHAZ), however rupture location was shifted to coarse grained HAZ (CGHAZ) as heat input decreased. The rupture surface showed tearing and dimple which indicated transgranular fracture. fracture.