• 한국의류학회지
• /
• 제33권11호
• /
• pp.1696-1706
• /
• 2009

Nonwoven fabrics have been widely used in various fields that include household, industrial, agricultural, medical goods, especially in the automobile industry. In this study, eco-friendly fiber materials were developed and investigated as a substitute material for polyester fibers in nonwovens. To make plant fiber bundles, stems of Indian mallow (IM), and Kuzu vine (KV) were retted; in addition, the non-cellulose component was partially removed. Plant fiber bundles and polyester fibers (P) were blended and needle punched to produce nonwovens. Five kinds of nonwovens were manufactured: P100 (Polyester 100%), IM10 (IM 10% and Polyester 90%), IM20 (IM 20% and Polyester 80%), KV10 (KV 10% and Polyester 90%), and KV20 (KV 20% and Polyester 80%). The color values, surface appearance, tensile strength, elongation, tear strength, abrasion strength, flexstiffness, moisture regain, water or oil absorbency, and static electricity of manufactured nonwovens are investigated. As the blended ratios of IM or KV increased, the brightness of nonwovens decreased compared to that of polyester 100%. Tensile strength, tear strength, abrasion strength, and flexstiffness of IM10 as well as KV10 were higher than those of P100, IM20, and KV20, resulting from the influence of the structure and properties of nonwoven fibers. Moisture regain and water or oil absorbency increased, while static electricity decreased in proportion to the amount of plant fibers. IM or KV and polyester blended nonwovens showed improved properties over P100 that could be substituted for P100 as a novel material for textiles.

• 펄프종이기술
• /
• 제29권1호
• /
• pp.7-12
• /
• 1997

This study was intended to investigate the proper shape and size of calcium carbonate for the improvement of paper properties and its end use performance. We loaded calcium carbonate of various shapes and size in the handsheet and measured their physical and optical properties. Results obtained from the study are summarized as follows : 1. Due to different particle shapes and sizes, precipitated calcium carbonate (PCC) contributed greater to bulk improvement than ground calcium carbonate (GCC). Scalenohedral form of PCC produced the bulkiest sheet, GCC made the sheet bulkier as average particle size increases. 2. Tensile strength increased as average particle size was increasing. GCC kept tensile strength more effectively than PCC. The effect of particle size on tensile strength was much more pronounced as filler addition level was increasing. 3. Over the average particle size of 6.99$\mu$m, GCC gave much higher burst strength and internal bond than PCC did. In the filler levels of 20% and 30%, GCC by using bigger size fillers showed 50~100% improvement in some cases than PCC at the same filler content. 4. Tear strength increased as average particle size was increasing. At the filler level of 30%, PCC decreased tear greatly. 5. Over the average particle size of 13.56$\mu$m, GCC kept bending stiffness greater than PCC. Due to its shape, Scalenohedral form of PCC showed higher stiffness than others at the same particle size. 6. Cubic and acicular form of PCC improved light scattering coefficient very effectively. Light scattering coefficient of GCC decreased as average particle size increased. 7. Both of particle shape and size of filler were important factor in developing optical properties and bending stiffness. Particle size was the only important factor in developing other strength properties

• Clinics in Shoulder and Elbow
• /
• 제7권1호
• /
• pp.30-34
• /
• 2004

Purpose: To report our experience of treatment of rotator cuff tear and evaluate the mid-term outcome. Materials and Methods: We have performed 50 cases of mini-open rotator cuff repair from March 1996 to March 1999. Male to female ratio was 34：16, the average age 46.5(23∼57) years old, mean follow-up period was 78(62∼93) months. All-arthroscopic repair and open repair cases were excluded. Mean symptomatic period was 12.5(6∼38) months, operation was indicated in cases of no improvement by 6 months of conservative management. Preoperative simple radiographs and Magnetic resonance arthrography were obtained in all cases. We also observed the inflammation, synovitis, thickness of tear and associated pathology intraoperatively. We evaluated pain, function, and range of motion by UCLA score. Results: Overall UCLA score was mean 29.5 points. Excellent 25, good 18, poor 7 cases. Mean pain score was improved 2.6 to 7.5, 44 cases(88%) were improved and 6 cases(12%) were not improved. Mean functional score was improved 3.4 to 8.5, and activity at follow up, 25 cases(50%) were same, 8 cases(14%) were above, 17 cases(34%) were below compared with preoperative level. Mean active forward flexion was preoperative 112° to postoperative 160°, forward flexion strength was improved 3.8 to 4.7. 43 cases(86%) of patients were satisfied at the result, 7 cases(14%) were not satisfied or aggravated. Results: Mini-open rotator cuff repair was effective method in treating rotator cuff tear.

• Clinics in Shoulder and Elbow
• /
• 제23권2호
• /
• pp.100-104
• /
• 2020

Function and strength of the deltoid muscle are important in reverse shoulder arthroplasty (RSA). Moreover, location and shape of the acromion, clavicle, and scapular spine, which are origins of the deltoid muscle, are also important. The frequency of os acromiale is 5% to 15%; however, it is rare in the Asian population, affecting approximately 0.7% of Koreans. RSA has rarely been reported in patients with os acromiale. We present a case series of two patients with cuff tear and arthropathy combined with os acromiale who underwent RSA. From 2016 to 2018, two patients with os acromiale who presented with pain and limited range of motion (ROM) underwent RSA with cuff tear arthropathy using the subscapularis-sparing deltopectoral approach. Their ROM, visual analog scale (VAS), and satisfaction were evaluated before and after surgery. In both patients, VAS decreased, ROM increased, and postoperative satisfaction increased. There were no specific complications due to os acromiale. The VAS, ROM, and satisfaction of patients improved after surgery compared with values before surgery. However, careful attention must be given during surgery to ensure optimal repair and recovery.

• Clinics in Shoulder and Elbow
• /
• 제19권1호
• /
• pp.51-58
• /
• 2016

The arthroscopic rotator cuff repair is now considered a mainstream technique with highly satisfactory clinical results. However, concerns remain regarding healing failures for large and massive tears and high revision rate. In recent decades, various repair strategies and construct configurations have been developed for rotator cuff repair with the understanding that many factors contribute to the structural integrity of the repaired construct. The focus of biomechanical test in arthroscopic repair has been on increasing fixation strength and restoration of the footprint contact characteristics to provide early rehabilitation and improve healing. These include repaired rotator cuff tendon-footprint motion, increased tendon-footprint contact area and pressure, and tissue quality of tendon and bone. Recent studies have shown that a transosseous tunnel technique provides improved contact area and pressure between rotator cuff tendon and insertion footprint, and the technique of using double rows of suture anchors to recreate the native footprint attachment has been recently described. The transosseous equivalent suture bridge technique has the highest contact pressure and fixation force. In this review, the biomechanical tests about repair techniques of rotator cuff tear will be reviewed and discussed.

• 펄프종이기술
• /
• 제45권3호
• /
• pp.52-58
• /
• 2013

To evaluate the anisotropic characteristics of Korean traditional paper-Hanji, the physical and mechanical characteristics of hand-made hanji, and machine-made hanji were investigated in this research. The densities of copying paper and newsprint paper appeared to be two times higher than the densities of hand-made hanji using Ssangbal sheet forming and hanji made of paper mulberry fiber. The breaking length, and tear index of both Hanji using Owangbal sheet forming, and hand-made Hanji using Ssangbal sheet forming appeared to be different according to the directions in paper. The breaking lengths of Hanji using Owangbal sheet forming showed little differences according to the directions. Breaking length of Hanji using Ssangbal sheet were slightly higher than those of Hanji using Owangbla sheet forming. The breaking lengths of machine-made hanji, copying paper, and newsprint paper were two to four times higher than those of hand-made Hanji. The breaking length showed higher differences according to the direction than the tear index. The tensile strength according to the directions in paper showed significant differences (${\alpha}$=0.05) in all papers used in this research.

• 한국염색가공학회지
• /
• 제24권3호
• /
• pp.221-231
• /
• 2012

Rayon fabrics were treated with some commercial non-formaldehyde and low-formaldehyde resins, and then their effect on the physicochemical properties of fabrics, including formaldehyde release, tear strength, shrinkage, and wrinkle recovery, were investigated respectively. Rayons treated with non-formaldehyde resin, little formaldehyde release was observed. Considering other factors, the optimal concentration of non-formaldehyde resin was shown to be 11-13%, and curing temperature was $170{\sim}175^{\circ}C$. In case of low-formaldehyde type, 9-11% resin concentration and curing temperature of $170{\sim}180^{\circ}C$ were recommended for optimal finishing condition. The choice and combination of resins and catalysts were also important factors, and preliminary considerations before resin-finishing of rayon are also important to get much better results.

• 한국의류학회지
• /
• 제21권7호
• /
• pp.1196-1204
• /
• 1997

Cotton, rayon/cotton, and Tencel twill weave fabrics were used to investigate the effect of fiber types on the cellulase washing finish. And twill. basket, and derivative weave cotton fabrics were used to study the weave effect. Various fabrics were treated with neutral cellulase varying treatment times and with acid cellulase, stone, and stone-neutral cellulase respectively for two hours in a rotary washer. Weight loss decreased in the order of rayon/cotton> cotton> Tencel, and basket and derivative weave fabrics lost more weight than twill weave fabric. Color difference decreased in the order of cotton> Tencel> rayon/cotton, and twill weave fabric had larger color difference than derivative and basket weave fabrics. Back staining decreased in the order of cotton> rayon/cotton> Tencel, and twill weave fabric had larger back staining than derivative and basket weave fabrics. Tear strength retention decreased in the order of rayon/cotton> cotton> Tencet and twill weave fabric had larger tear strength retention than derivative and basket weave fabrics. Flex stiffness retention decreased in the order of cotton> Tencel> rayon/cotton, and in the order of derivative> twill> basket weave. In cotton fibers, damage of primary wall was observed. And the cellulase treatment on Tencel seemed to roughen the fabric surface slightly, and to fibril fibers along the fiber axis.

• 한국염색가공학회지
• /
• 제24권2호
• /
• pp.121-130
• /
• 2012

Cotton fabrics were treated with some commercial non-formaldehyde and low-formaldehyde resins, and then their effect on the physicochemical properties were respectively investigated including formaldehyde release, tear strength, shrinkage, and wrinkle recovery. Formaldehyde release less than 10ppm was obtained only by non-formaldehyde resin. Considering other factors, the optimal concentration of non-formaldehyde resin was shown to be 9-11%. In case of low-formaldehyde type, 5-7% resin concentration and curing temperature of $160{\sim}170^{\circ}C$ were recommended for optimal finishing condition. The choice and combination of resins and catalysts were also important factors, and preliminary considerations before treating cotton fabrics with resins used in this study are also important to get much better results.

• Elastomers and Composites
• /
• 제50권3호
• /
• pp.196-204
• /
• 2015

Crosslink density of a rubber vulcanizate determines the chemical and physical properties, while bound rubber is an important factor to estimate reinforcement of a filled rubber compound. Extender oil is added to a raw rubber with very high molecular weight for improving processability of a rubber composite. Influence of extender oil on crosslink density, bound rubber formation, and physical properties of solution styrene-butadiene rubber (SSBR) composites with differing microstructures was investigated. Crosslink densities of non-oil-extended SSBR (NO-SSBR) vulcanizates were higher than those of oil-extended SSBR (OE-SSBR) ones. Bound rubber contents of NO-SSBR compounds were also greater than those of OE-SSBR ones. The experimental results could be explained by interfering of extender oil. The OE-SSBR vulcanizates had low modulus but long elongation at break, whereas the NO-SSBR ones had high modulus but short elongation at break. It was found that the crosslink densities affected the physical properties more than the bound rubber contents. The moduli increased with increase in the crosslink density irrespective of extender oil, while the elongation at break decreased. Each variation of the tensile strengths of NO-SSBR and OE-SSBR vulcanizates with the crosslink density showed a decreasing trend. Tear strength of the OE-SSBR vulcanizate increased with increase in the crosslink density, whereas variation of the tear strength of NO-SSBR vulcanizate with the crosslink density showed a weak decreasing trend.