• Journal of Korean Ophthalmic Optics Society
• /
• v.21 no.2
• /
• pp.99-108
• /
• 2016

Purpose: The present study was aimed to compare the tear volume and distribution by corneal eccentricity when fitted with spherical and aspherical RGP lenses. Methods: Spherical and aspherical RGP lenses were fitted in best alignment on a total of 77 subjects (136 eyes) in their twenties and thirties without any ocular disease or ocular surgery experience. The tear volume was analyzed by estimating the concentration of tear stained with fluorescein in the center of RGP lens as well as at the mid-peripheral and peripheral areas, and the difference of tear distributions was analyzed according to corneal eccentricity. Results: Tear distribution from the center to the peripheral area was not significantly different when spherical RGP lenses were fitted on the corneal eccentricities of e < 0.38 and $0.68{\leq}e$, indicating the relatively even tear distribution compared with other corneal eccentricity. In the case of aspherical RGP lenses, the difference of tear distribution between the central and peripheral areas was smaller than spherical RGP lenses. The significant difference of tear distribution according to RGP lens design was observed in the corneal eccentricity of 0.48 < e < 0.68. In other words, more even tear distribution was shown when aspherical RGP lenses were fitted on the cornea with eccentricity of $0.48{\leq}e<0.68$ and spherical RGP lenses were fitted on the cornea with eccentricity $0.68{\leq}e$. Furthermore, tear volume in the mid-peripheral area increased with higher corneal eccentricity. Conclusions: The results suggest that the appropriate selection of RGP lens design according to corneal eccentricity is necessary since tear volume and distribution by the regions of spherical and aspherical lenses are affected by corneal eccentricity.

• Journal of Acupuncture Research
• /
• v.19 no.6
• /
• pp.221-233
• /
• 2002

Background and Purpose : MRI(Magnetic Resonance Imaging) has become one of the most sensitive diagnostic tool no evaluate problems of the knee, because it enables us to identify not only osseous tissue but also soft tissues including muscle, fascia, tendon, ligament, meniscus and fat around the knee joint. Objective : To compare between MRI reading and pain, duration, physical examination in patients with pain of knee joint. Methods : 20 patients with pain of knee joint included in this study. This study researched pain-degree, duration, physical examination with pain of knee joint. Using MRI(Horizon Lx 1.0T-GE), we obtained the results. Results : 1. In the distribution of sex; Female rate was 80.0% and male rate was 20.0%. In the distribution of age, above sixty group was the largest group by each 55.0%. 2. In the distribution of MRI reading; 'Meniscus horm tear' was 70.0%, 'Osteoarthritis' was 55.5%, 'ACL partial tear' was 15.0%, 'Bone bruise at tibia, femur' was 15.0%. 3. Correlation between duration of pain and MRI reading showed that acute and subacute stage related various MRI reading, that chronic stage related 'Osteoarthritis' and 'Meniscus horn tear' by each 69.2%, 92.3%. 4. Correlation between pain and MRI reading showed that severe pain(GVI) related 'ACL partial tear, PCL partial tear' by each 100%, that mild pain(GII) related 'Osteoarthritis, Meniscus horn tear' by each 70.0%, 80.0%. 5. Correlation between physical examination and MRI reading showed that Drawer test related ACL partial tear by each 60.0%, that McMurray test related 'Meniscus horn tear' by each 75.0%. 6. Correlation between effect of treatment and MRI reading showed that 'Osteoarthritis, Meniscus horn tear' related good effect, that ACL partial tear related poor effect. Conclusions : These results suggest that acute and sever pain relate 'ACL partial tear, PCL partial tear', that chronic and mild pain related 'Osteoarthritis, Meniscus horn tear'. So it is responsibility to use MRI as a sensitive diagnostic tool in the knee problems.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.33 no.1
• /
• pp.30-37
• /
• 2001

The effects of enzymatic treatment of recycled fiber were investigated to obtain the basic informations which can be used to improve the papermaking properties of recycled fiber. The recycled fibers were prepared by the repeated handsheet making and disintegrating of hardwood of hardwood and softwood kraft pulp. Novozym 342, Dinimax and Pulpzyme HC were used for enzymatic treatment. The change of fiber length distribution, freeness, contact angle and crystallinity of pulp were measured. The brightness, opacity, breaking and tear index of paper were also measured. The enzymatic treatment decreased long fiber fraction of recycled hardwood fiber, but increased long fiber fraction of recycled softwood fiber. Freeness was decreased with 0.1% enzyme and then increased again with the increase of th enzyme dosage. The improvement of flexibility of recycled fiber was obtained through the decrease of contact angle that is resulted from the decrease of crystallinity of fiber. Brightness and opacity were affected by the type of pulp and enzyme, and dosage of enzyme. Breaking length of recycled hardwood fiber was improved with enzyme treatment, but breaking length of recycled softwood fiber was decreased except for 0.01% Pulpzyme treatment. Tear index was decreased with enzymatic treatment and the lowest decrease was observed with the treatment to Pulpzyme.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.31 no.3
• /
• pp.54-59
• /
• 1999

This study was to quantify fiber distributions in thickness direction of kenaf handsheets as a fiber distribution index (FDI) and to analyze the relationship between FDI and the handsheet properties. The images of fiber distribution in z-direction were obtained by Confocal Laser Scanning Microscope (CLSM) and analyzed by image analysis technique. The proposed FDI had a good correlation with high R2 vlaues with various properties of paper, such as apparent density, scattering coefficient , burst index, tear index, tensile index, and folding endurance. The proposed FDI was shown as a good index to quantify paper properties.

• Clinics in Shoulder and Elbow
• /
• v.11 no.2
• /
• pp.104-111
• /
• 2008

Purpose: The aim of this study is to analyze the clinical results of using the technique of rotator cuff repair without parting the biceps long head from the glenoid for large or massive tear of the rotator cuff. Material and Methods: Form January 2005 to January 2007, we performed the arthroscopic biceps repair with incorporating suture to the rotator cuff for 21 patients with large or massive rotator cuff tear. The mean follow up period was 23 months (range: 6-48months). The number of males and females was 9 and 13, respectively. The age distribution ranged from 47 to 73 years with a mean age of 60.3 years. We compared the preoperative score with the postoperative scores using the University of California Los Angeles (UCLA) score, the shoulder index of the American Shoulder and Elbow Surgeons (ASES) and a simple shoulder test (SST). Results: The improvement in the VAS, ASES and the UCLA and SST scores was statistically significant at the final follow up (average follow-up 23 months) (p>0.05). Two of nine cases were found to have partial tear with continuity but seven cases were found to have complete tear according to the ultrasonography and MRI. Conclusion: The technique of rotator cuff repair without parting the biceps long head from the glenoid for large or massive tear of the rotator cuff is considered to be recommendable.

• Journal of Korean Ophthalmic Optics Society
• /
• v.18 no.2
• /
• pp.93-99
• /
• 2013

Purpose: The aim of this study was to develop a dry eye test method using a paper based microfluidic device that improves inaccuracy caused by using one of current point-of-care dry eye tests such as Shirmer's. Methods: Wax printed hydrophilic chromatography papers were dyed with anthocyanin extracts to detect colorimetric display of liquid samples with varying pH. Fluid distribution rates were measured using artificial tears and human tears directly from 32 subjects. Results: With Shirmer's, fluid distribution rates with small amount of samples (less than $0.5{\mu}l$) were not displayed. However, with paper based microfluidic device, fluid imbibition distances over time were clearly showed. Also clinical results of dry eye from newly developed paper based microfluidic device showed correlation with the results from tear break up time tests. Conclusions: The newly developed paper based microfluidic devices were easy to use and exhibited more accurate clinical results than current dry eye point of care tests such as Shirmer's.

• Clinics in Shoulder and Elbow
• /
• v.14 no.1
• /
• pp.13-19
• /
• 2011

Purpose: Not much is known about the obvious relationship between posteroinferior rotator cuff tear and biceps lesion. The purpose of this study is to analyze the effect of posteroinferior rotator cuff tear on a biceps lesions by comparing the rotator cuff tear and biceps lesions with the number of cuff tears and the degree of degeneration of the rotator cuff. Materials and Methods: 65 patients who underwent surgery for a posteroinferior rotator cuff tear from 2002 to 2009 were included as subjects. The study determined the factors (the number of cuff tears and the degree of degeneration as assessed by MRI) that affected biceps lesions and the kinematic stability of the rotator cuff. Results: Biceps lesion was noted 11 patients among the 51 patients with supraspinatus tendon tears and in 8 patients among the 14 patients with supraspinatus, infraspinatus or teres minor tendon tears, and there was a statistically significant difference between those two groups (p=0.0095). The number of cuff tears was proportional to biceps lesion with statistical significance (p=0.0095). Among the biceps lesions, SLAP II lesion showed a statistically different distribution according to the number of cuff tears (p=0.0073). The degeneration factors (Goutallier's classification and the tangent sign) had no correlations with biceps lesion. Conclusion: Posterosuperior cuff tear may affect biceps lesion. Especially, the number of cuff tears has a close relationship, but the degenerative indicators have no relationship with biceps lesion.

• Journal of the Korean Arthroscopy Society
• /
• v.11 no.2
• /
• pp.122-127
• /
• 2007

Purpose: To know about the clinical characteristics such as causes, types, associated injuries and treatment of the lateral meniscus injuries. Materials and Methods: Retrospective analysis was performed for 129 lateral meniscus tears which were divided into 2 groups, Non-discoid and Discoid. Analysis included age and sex distribution, causes of injury, types and location of tear, associated injuries, and methods of treatment. Results: Both Non-discoid and Discoid were prevalent in man and Discoid group was equally distributed through 2nd to 5th decades and Non-discoid group was more prevalent in 4th to 5th decades. Sports injury was the most common cause in both groups and the Nondiscoid group tended to sustain minor injuries compared to Discoid group. Complex tear and body was most common type and site of tear in both groups. Associated injuries were common in Non-discoid group and isolated injuries were common in Discoid group. Partial meniscectomy was commonly done in Non-discoid group and subtotal meniscectomy in Discoid group based on the types of tear. Conclusion: Non-discoid and Discoid lateral meniscus injuries are similar in types and sites of injuries but different in causes of injury, associated injuries and methods of treatment. Therefore, proper diagnosis and treatment would be necessary according to the characteristics.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2002.10b
• /
• pp.123-124
• /
• 2002

A press shoe is an element of a machine for squeezing water from wood pulp in the field of manufacturing paper. This is used to compress the pulp enveloped by felt sheet with a large roller. The squeezing force is made by hydraulic pressure. The press shoe has a mechanism similar to a partial hydrostatic bearing. The pressure profile between press shoe and roller affects their squeezing ability, and partial peak pressure can tear the wet pulp. The curvature of the surface of press shoe varies to reduce the peak pressure and increase the mean pressure simultaneously. Therefore, the prediction of pressure distribution considering partially changed curvature of hydrostatic bearing is very important for designing the press shoe. In this study, the difference formulation of Reynolds' equation for partial hydrostatic bearing is by direct numerical method and a computer program to calculate the pressure distribution is developed. We investigate the effect of partially changed curvature of bearing surface on the pressure distribution. Other design parameter for hydrostatic bearing such as depth of pocket and relative velocity are also studied.

• KSTLE International Journal
• /
• v.3 no.2
• /
• pp.90-94
• /
• 2002

A press shoe is an element of a machine for squeezing water from wood pulp in the field of manufacturing paper. This is used to compress the pulp enveloped by felt sheet with a large roller. The squeezing farce is made by hydraulic pressure. The press shoe has a mechanism similar to a partial hydrostatic bearing. The pressure profile between press shoe and roller affects their squeezing ability, and partial peak pressure can tear the wet pulp. The curvature of the surface of press shoe varies to reduce the peak pressure and increase the mean pressure simultaneously, Therefore, the prediction of pressure distribution considering partially changed curvature of hydrostatic bearing is very important far designing the press shoe. In this study, the difference formulation of Reynolds equation far partial hydrostatic bearing is derived by direct numerical method and a computer program to calculate the pressure distribution is developed. We investigate the effect of partially changed curvature of bearing surface on the pressure distribution. Other design parameter far hydrostatic bearing such as depth of pocket and relative velocity are also studied.