• Journal of the Korean Ceramic Society
• /
• v.46 no.2
• /
• pp.200-210
• /
• 2009

It is necessary to minimize the mismatch of sintering shrinkage between dielectric ceramic and Ni inner electrode layers for the purpose of developing the ultra high-capacity multi layered ceramic condenser(MLCC). Thus, low temperature sintering of dielectric $BaTiO_3$ ceramic should be precedently investigated. In this work, the influence of the milling condition on sintering behavior and electrical properties of $BaTiO_3$ ceramics was investigated in the $BaTiO_3$(BT)-Mg-Dy-Mn-Ba system with borosilicate glass as a sintering agent. As milling time increased, specific surface area(SSA) of the powder increased linearly, while both sinterability and dielectric property were found to be drastically decreased with an increasing SSA. It was also revealed that the sinterability of the excessively milled $BaTiO_3$ ceramics could be recovered by increasing Ba content, rather than increasing glass addition. These results suggest that the sintering behavior of $BaTiO_3$ ceramics under the high SSA was more strongly dependent on the transient liquid phase caused by Ba addition, than the liquid phase from additional glass.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.42 no.1
• /
• pp.218-226
• /
• 2017

In this paper, optical transport network in real time monitoring system using smart phone. The existing housing using monitoring was a smart phone of optical transport network access switch about an event with new installation of cognitive system in real time. This paper can this problem to be solved of the invention in real time maintenance using smart phone application and optical cable closure switch. If you want to find optical cable closure fault location, this smart phone web is very useful. Cable tie is isolation of fiber spare board from fiber switch tie occur push message. Housing and access, and an external failures otdr the measurement of the global positioning to be able to easily using the This paper can find event of optical cable closure unauthorized work and fault using smart phone OTDR function. the optical cable fault time reduction and network transport quality by managing real time optical cable section by using the smart phone can be maintained efficiently.

• Korean journal of communication and information
• /
• v.57
• /
• pp.49-68
• /
• 2012

Much research has been documented on the topic of journalist labour, including process of news production, organizational culture and journalist ethics. Relatively little interest is given to the recent changes in journalist labor caused by the digital convergence in contemporary news industry, however. This study explore the changes from the perspective of the transformation of professional works, practices and identities. For the purpose, in-depth interviews with 17 Korean journalists were conducted and the results can be summarized as follows. First, interviewed journalists expressed both expectations and worries concerning the changes of news production environments. Second, it was found that the new environments could conflict with the old professional culture and confuse the professional identities. Third, the confusion of professional identities was concerned with adaptability, emotional consent or resistance to the changes.

• The Journal of Korean Physical Therapy
• /
• v.11 no.3
• /
• pp.123-131
• /
• 1999

The purpose of is study deals with the physical therapy and the delivery system of public health center, as a center, in community based rehabilitation and delivery system. We hope that the system of physical therapy of public health center in community based rehabilitation spreads all over the country and contributes to the promotion of national health and social welfare. There are many public health center in the country because it can serve inhabitants with the medical benefits in the Erst line. public health center continuously provides poor inhabitants who cant pay medical expenses care of health. It has the public health center branches that take care of inhabitants who live a remote village and hiterland. Additionally, many people want to receive physical therapy. Therefore, the physical therapy of public health center becomes the central paint in community based rehabilitation so that we supply the inhabitants with superior rehabilitation service. We can approach them as a team that be constituted with physical therapist speech therapist, psychologist, nurse, social work. Also the role of physical therapist is divided into two parts, which are home visiting part that individually takes can of patients nod public health part that takes care of patient, family, home, community. We connect with both self-governing body and the government so that we may receive government subsidies. Also, we must prepare regular school education for community based rehabilitation

• Journal of the Society of Naval Architects of Korea
• /
• v.52 no.1
• /
• pp.25-33
• /
• 2015

Following the previous works on the natural frequency of heaving circular cylinder, i.e. Lee and Lee (2013) and Kim and Lee (2013), an investigation of the same spirit on the 2-dimensional cylinder of Lewis form has been conducted. As before, the natural frequency is defined as that corresponding to the local maximum of the MCFR (Modulus of Complex Frequency Response), which is given by the equation of motion in the frequency domain analysis. Hydrodynamic coefficients were found by using the Ursell-Tasai method, and numerical results for them were obtained up to much higher frequencies than before, for which the method was known as numerically unstable in the past. For a wide range of H, the beam-draft ratio, and ${\sigma}$, the sectional area coefficient, including their practical ranges for a ship, results for the natural frequency were computed and presented in this work. Two approximate values for the natural frequency, one proposed by Lee (2008) and another one by the damped harmonic oscillator, were also compared with the current results, and for most cases it was observed that the current result is between the two values. Our numerical results showed that the values of the local maximum of MCFR as well as the natural frequencye increase as ${\sigma}$ increases while H decreases. At present, extension of the present finding to the 3-dimensional ship via the approximate theory like the strip method looks promising.

• Journal of the Korean Dietetic Association
• /
• v.21 no.1
• /
• pp.37-56
• /
• 2015

This study was conducted to develop job standards for clinical dietitian administering clinical nutrition therapy to diabetic patients in hospitals. Based on DACUM (Developing A Curriculum) analysis of 17 members including clinical dietitians, professors majoring in clinical nutrition and researchers, information on duties, tasks and task elements of clinical dietitians for diabetes care were derived and applied to diabetes mellitus-specific clinical nutrition care in hospitals for evaluation. The final developed job standards for clinical dietitians for diabetes care included four duties, 19 tasks and 56 task elements. The duties consisted of nutrition assessment, nutrition diagnosis, nutrition intervention, and nutrition monitoring evaluation. For application of diabetes mellitus-specific job standards in clinical nutrition care, 108 work activities were developed and classified into 90 basic and 18 recommended types. Performance rates of standardized jobs were 80.2% at nutrition assessment, 99.6% at nutrition diagnosis, 78.5% at nutrition intervention, and 32.9% at nutrition monitoring evaluation. These results can be applied as guidelines to implement jobs for diabetes mellitus-specific clinical nutrition services in clinical settings. In addition, they would be useful for education standards in educational institutions for education and training of clinical dietitian.

• Safety and Health at Work
• /
• v.3 no.2
• /
• pp.140-145
• /
• 2012

Objectives: To understand the personal experiences of mine workers that have experienced job relocation due to silicosis at the Andina Division of Corporaci$\acute{o}$n Nacional del Cobre (CODELCO), Chile. The purpose of the study was to provide useful information for the development of new local, business and public policies for the care of workers with silicosis. Methods: A qualitative study based on a practical case study of 5 workers. The information was collected by means of structured individual interviews. The method of analysis was phenomenology. Results: The corporal axis was the most commented upon. It included awareness of the illness, body pains, fatigue, and antagonistic mood disorders (sadness, or the difficulty in finding meaning in life). As far as personal relationships, there was evidence of strong relationships with family, coworkers and friends, as well as extended family. Over all, the experience of relocation was positive with periods of impatience and uncertainty. The job reassignment provided a new and pleasant context for the relocated workers and in the process improved their perception of their quality of life. Conclusions: A multidisciplinary team should attend mine workers relocated because of silicosis by addressing the mental and physical aspects of their disease, along with the integral participation of close family members. It is suggested that this investigation be maintain over time to record the personal experiences in the medium-term, adding new cases with the intention of shedding more light on the phenomenon being studied. As a preventive measure, continual workshops are needed on the proper use of respiratory protection in addition, a group of monitors is required.

• 한국문화재보존과학회:학술대회논문집
• /
• 2004.10a
• /
• pp.33-42
• /
• 2004

The forged iron axe found in the No. 2 wood-framed tomb (the middle 3rd century) of Hwangseongdong, Gyeongju is rectangular on the plane level. It shows an obtuse angle in the edge part, while the joint part has the both sides folded up and shows the traces of wood. Under the reflected light, the Iron axe shines in metal luster, which is bright light gray or light creamy colors. The result of x-ray diffraction analysis shows that the axe consists of magnetite and geothite, which can explain why the composition and structure of the original ore has been kept intact. The microtexture of the axe has the irregular network of ferrite and pearlite, and tile cementite of tiny amount in the ferrite background. The overall treatment of the texture seems to be thermal with a high ratio of carbon. There are fine-grained magnetite, wolframite, quartz, calcite, mica, hornblende and pyroxene inside the axe. Those must be the impurities that they failed to remove in the refining process. The normal ferrite is composed of pure iron whose $Fe_2O_3$ proportion is from 99.16 to $99.84\;wt.\%$. Other than them, the ferrite parts usually contain $Al_2O_3\;and\;SiO_2$. The irregular network of pearlite also contains Impurities including $Al_2O_3\;and\;SiO_2$ and shows highly diverse patterns of carbon content. It's because the axe was carburized after the material was made to resemble pure iron. The decarbonization work didn't go well along the process marks. It's estimated that the original ore was bloom produced in low-temperature reduction and formed around in $727^{\circ}C$, which is eutetic temperature.

• Archives of Pharmacal Research
• /
• v.23 no.5
• /
• pp.507-512
• /
• 2000

This study set out to improve the physical and pharmaceutical characteristics of the present formulation using an appropriate experimental design. The work described here concerns the formulation of the dispersible tablet applying direct compression method containing roxithromycin in the form of coated granules. In this study $2^3$ factorial design was used as screening test model and Central Composite Design (CCC) associated with response surface methodology was used as optimization study model to develop and to optimize the proper formulation of roxithromycin dispersible tablet. The three independent variables investigated were functional excipients like binder (X1), disintegrant (X2) and lubricant (X3). The effects of these variables were investigated on the following responses: hardness (Y1), friability (Y2) and disintegration time (Y3) of tablet. Three replicates at the center levels of the each design were used to independently calculate the experimental error and to detect any curvature in the response surface. This enabled the best formulations to be selected objectively. The effect order of each term to all response variable was X3> X2> Xl> X1＊X2> X2＊X2> X2＊X3> X3＊X3> Xl＊X3> Xl＊Xl and model equations on each response variables were generated. Optimized compositions of formula were accordingly computed using those model equations and confirmed by following demonstration study. As a result, this study has demonstrated the efficiency and effectiveness of using a systematic formulation optimization process to develop the tablet formulation of roxithromycin dispersible tablet with limited experiment.

• Journal of the Ergonomics Society of Korea
• /
• v.26 no.3
• /
• pp.27-33
• /
• 2007

The purpose of this study was to investigate influence of wrist position on the electromyographic(EMG) activities of the flexor digitorum superficialis (FDS) and extensor digitorum (ED) during drilling and pinch grip. Eighteen healthy subjects had been recruited and each subject performed two tasks (drilling and pinch grip) at three different wrist positions ($30^{\circ}$ flexion, neutral, $30^{\circ}$ extension). The EMG amplitude of each muscle was normalized to the amplitude in the maximal voluntary contraction (MVC). Repeated one-way ANOVA was used to compare the differences of EMG across wrist positions. The FDS EMG activity in both drilling and pinch grip was lowest at $30^{\circ}$ wrist extension and the highest at $30^{\circ}$ wrist flexion. The ED EMG activity was lowest when the wrist was neutral in both tasks. From the results of this study, we can conclude that the desirable wrist positions for drilling and pinch grip tasks are slightly extended or neutral position. Therefore, flexed wrist position should be avoided to reduce the excessive work load on the finger muscles during the tasks.