• Analytical Science and Technology
• /
• v.15 no.3
• /
• pp.256-262
• /
• 2002

After porous filters were manufactured using cordierite powder whose mean paricle size was 200${\mu}m$, they were loaded with catalysts such as $V_2O_5$, CuO and $LaCoO_3$ by vacuum impregnation method. And the NOx/SOx simultaneous removal efficiency was measured by passing NO and $SO_2$ through catalyst-loaded ceramic filters. The cordierite porous filters had the apparent porosity of 61.6%, the compressive strength of 12.3 MPa and the pressure drop of 147 pa at the face velocity of 5 cm/sec. According to the analysis of NO/$SO_2$ simultaneous removal efficiency, perovskite $LaCoO_3$ catalyst was the most efficient for the simultaneous NO and $SO_2$ removal. The $LaCoO_3$ catalyst-loaded filter could remove more than 90% for NO and more than 80% for $SO_2$.

• Korean Journal of Materials Research
• /
• v.18 no.6
• /
• pp.307-312
• /
• 2008

In this study, a new cleaning process with a low cost of ownership (CoO) was developed with ozonated DI water ($DIO_3$). An ozone concentration of 40 ppm at room temperature was used to remove organic wax film and particles. Wax residues thicker than $200\;{\AA}$ remained after only a commercial dewaxer treatment. A $DIO_3$ treatment in place of a dewaxer showed a low removal rate on a thick wax layer of $8000\;{\AA}$ due to the diffusion-limited reaction of ozone. A dewaxer was combined with a $DIO_3$ rinse to reduce the wax removal time and remove wax residue completely. Replacing DI rinse with the $DIO_3$ rinse resulted in a surface with a contact angle of less than $5^{\circ}$, which indicates no further cleaning steps would be required. The particle removal efficiency (PRE) was further improved by combining a SC-1 cleaning step with the $DIO_3$ rinsing process. A reduction in the process time was obtained by introducing $DIO_3$ cleaning with a dewaxing process.

• Analytical Science and Technology
• /
• v.16 no.1
• /
• pp.12-24
• /
• 2003

For the design and set-up of neutron induced prompt ${\gamma}$-ray spectroscopy system using $^{252}Cf$ neutron source, the effects of shielding and moderator materials have been examined. The $^{252}Cf$ source being used for TLD badge calibration in Korea Atomic Energy Research Institute was utilized for this preliminary experiment. The ${\gamma}$-ray background and prompt ${\gamma}$-ray spectrum of the sample containing Cl were measured using HPGe (GMX 60% relative efficiency) located at the inside of the system connected to notebook PC at the outside of the system (about 20 meter distance). The background activities of neutron and ${\gamma}$-rays were measured with neutron survey meter as well as ${\gamma}$-ray survey meters, respectively and the system was designed to minimize the activities. Prompt ${\gamma}$-ray spectrum was measured using ${\gamma}$-${\gamma}$ coincident system for reduce the background and the continuum spectrum. The optimum system was designed and set up using the experimental data obtained.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.17 no.4
• /
• pp.63-72
• /
• 2013

A Mach 5 nozzle and a diffuser of the Scramjet Engine Test Facility (SETF) were made for a hydrocarbon-fueled scramjet engine. SETF, attached with a diffuser guide, started with a model of 60% blockage, though the model engine could not start by over expansion of the facility nozzle. The model was moved into the nozzle to escape the shock generated from the nozzle exit, both SETF and the engine could start. The pitot rake experiments (blockage of 2.3%) were done for measuring the core flow in the test section. From the pitot experiments, the core flow was expanded by an under expansion. It means that the core flow in the test section was related with a model blockage. SETF and the engine with a blockage of 33% work normally. From a series of experiments, SETF started with a normal shock efficiency of 58%, regardless of a blockage ratio.

• Journal of Digital Convergence
• /
• v.14 no.5
• /
• pp.165-176
• /
• 2016

The purpose of this study is to examine the effects of the IT resources on the work efficiency and corporate performance in Mobile Smart-Work Environment with IT convergence Technology by applying the Resource-Based View. The study has an academic meaning by empirically analyzing the effects of factors identified based on the existing study on the IT resources in Mobile Smart-Work, and practical implications to identify how the significance of the Mobile Smart-Work used as a platform of variety industries in manufacturing, logistics, service, distribution, finance, public institutions, and so on positively affects improvement of corporate efficiency and performance. The results showed that IT Infrastructure and IT skills in the Mobile Smart-work environment were found to bring positive effects on individual work efficiency, and IT skills had positive influence on team work efficiency. Also, we confirmed the individual and team work efficiency positively affect financial and market performance of business firms. Finally, we expect that business firm equipped with IT resources in the Mobile Smart-Work environment with IT convergence Technology. It can improve this work efficiency and the performance, which leads to strengthening the core competency.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.22 no.1
• /
• pp.108-117
• /
• 2016

In this paper, a portal system compatible with MRV regulation was designed to monitoring, reporting and verifying $CO_2$ emission and fuel consumption data from an international ship. A portal system supports monitoring and reporting task of international shipping companies and calculates national greenhouse gas inventory. EU MRV law, MRV discussions of IMO, responses of international shipping companies to ship energy efficiency and greenhouse gas regulation, and greenhouse gas statistics on international shipping were analyzed to drive portal system requirements. For ship energy efficiency and $CO_2$ emitted monitoring, a data collection module was designed based on on-board equipment, energy efficiency measuring device and navigation report. Data transfer module with easy management and minimized usage to transfer ship data to shore was designed. A portal system was designed to convert the collected data into the standard reporting format, perform monitoring, statical analysis, verification and auto report generation, and support national greenhouse gas inventory.

• Korean Journal of Environmental Agriculture
• /
• v.26 no.3
• /
• pp.223-227
• /
• 2007

This study was carried out to establish the reasonable level of nitrogen (N) fertilization based on soil nitrate nitrogen $(NO_3-N)$ content for cucumber (Cucumis sativus L.) under plastic film house. Cucumber plants were cultivated with standard and free N fertilization in eight soils which had various amount of $NO_3-N$ ranging from 67 to 343 mg/kg. The yield of cucumber was in the range of 1006 to 2369 g/plant depending on the nitrogen supplying capability of soils. The amount of $NO_3-N$ in the soil was negatively correlated with agronomic efficiency (AE) and N use efficiency (NUE). The critical level of soil $NO_3-N$ content for cucumber in N free fertilization was found to be about 260 mg/kg in Cate-Nelson analysis of variance between soil $NO_3-N$ and AE or NUE. Also the same critical soil $NO_3-N$ content was found in the yield and amount of N uptake of cucumber under N free fertilization. A standard N fertilization was required when soil $NO_3-N$ content was below 70 mg/kg. The optimal application rate of N fertilizer for cucumber in the soils containing $NO_3-N$ between 260-70 mg/kg could be recommended by the equation Y=-1.032X+269.2 (Y: N fertilization rate, kg/ha; X : soil $NO_3-N$ content mg/kg).

• Asia Pacific Journal of Business Review
• /
• v.3 no.1
• /
• pp.19-38
• /
• 2018

The energy intensity of Nepal is economically not worthy, lacks eco-friendly and importantly not sustainable, and almost four times the average global energy intensity. Considerable efforts have been exercised to reduce the energy gap yet, it is still much to achieve. Nation priority on energy sector was envisaged with promulgation of investment friendly rules and law in hydropower and renewable technology even though, could not harness the sufficient energy. In amid of this acute energy crisis, the government launched the Nepal Energy Efficiency Programme (NEEP) with technical assistance from German International Cooperation (GIZ). Energy Efficiency (EE) practice is the most cost-effective method to reduce the supply and demand gap, reduce on greenhouse gases and pollution, and deter on import of petroleum products which finally improves on trade imbalance. This paper had proposed a framework of energy management team to promote energy efficient technologies in residential consumer. The energy management teams study the past records of energy use pattern of consumers and suggest appropriate technology for energy saving options. The paper provides some reviews of energy efficiency initiatives undertaken by the concern regulatory body which highlights the current status. The comprehensive knowledge acquired through exploratory research is implemented in this paper to identify the various barriers that domestic consumer is experiencing towards the active participation in energy efficiency program launched by the Government of Nepal.

• Journal of Broadcast Engineering
• /
• v.17 no.5
• /
• pp.781-788
• /
• 2012

In HEVC, the fast search method is used for reducing the complexity of the motion prediction procedure. It is consisted of the sub-sampled SAD which reduce the complexity of Sum of Absolute Differences(SAD) calculation and the simplified bi-prediction method which reduce the iterations of the uni-prediction for the bi-prediction. The computational complexity is largely decreased by the fast search method but the coding gain is also decreased. In this paper, the simplified bi-prediction is extended to compensate the performance loss and the prediction cost based complexity reduction methods are also proposed to reduce the complexity burden by the extended bi-prediction method. A prediction cost based complexity reduction method is consisted of early termination method for the extended bi-prediction and the bi-prediction skipping method. Compare with HM 6.0 references S/W, the average 0.42% of BD-bitrate is decreased by both the extended bi-prediction method and the prediction cost based complexity reduction methods with negligible increasement of the complexity.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.2
• /
• pp.443-449
• /
• 2017

The imbalance of air supply and the exhaust on subway platforms has led to the installation of platform screen doors in underground subway stations. This imbalance causes the accumulation of pollutants on the platform and loss of comfort due to the lack of ventilation. In this study, a floor exhaust system was optimized using computational fluid dynamics (CFD) and an optimization program. The optimized floor exhaust system was manufactured and tested experimentally to evaluate the particle collection efficiency. CFX 17.0 and HEEDS were used to analyze the flow field and optimize the principal dimensions of the exhaust system. As a result of the three-step optimization, the optimized floor exhaust system had a total height of 1.78 m, pressure drop of 430 Pa, and particle collection capability of 61%. A fine dust particle collection experiment was conducted using a floor exhaust system that was manufactured at full scale based on the optimized design. The experiment indicated about 65% particle collection efficiency. Therefore, the optimized design can be applied to subway platforms to draw in exhaust air and remove particulate matter at the same time.