• Membrane Journal
• /
• v.17 no.4
• /
• pp.318-328
• /
• 2007

This study was carried out to evaluate the performance of the separate membrane (HF; hollow fiber membrane with polysulfone) process applied with the external membrane types, internal pressure membrane types and external-internal types according to the variations of pressure and membrane pore size in the purification treatment process of the lake water. The maximum permeate flux was average values of 282 LMH and 234 LMH with the pore size of 0.3 and 0.05 ${\mu}m$ respectively in the external pressure membrane process, and 443 LMH and 522 LMH with the pore size of 0.3 and $0.05{\mu}m$ respectively in the internal pressure membrane process. In addition, the maximum permeate flux of the process that was applied with external and internal membrane pressure simultaneously showed the average values of 674 LMH with the pore size of $0.3{\mu}m$, and 648 LMH with the pore size of $0.05{\mu}m$. Therefore, maximum yield per unit area is supposed when the separate membrane that was applied with external and internal pressure simultaneously are used to treat the lake water.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.3 no.3
• /
• pp.277-282
• /
• 2015

This study is conducted to utilize waste concrete powder (WCP) made as a by-product manufacturing high quality recycled aggregate. The blaine fineness of the used waste concrete powder was $928cm^2/g$. As the main characteristic of waste concrete powder, it showed an angular type similar to cement, but hydrated products were attached on the surface of particles. In addition, the size of the particles of waste concrete powder was larger than OPC and in terms of chemical components it had higher $SiO_2$ contents. For using WCP in soil cement-based pavement, the qualities, physical and chemical properties, of WCP should be researched. In the first step, the specified compressive strength of mortar for two types of clay sand soil and clay soil respectively was experimented to be 15 MPa and then optimum mixing ratio of chemical solidification agent were decided in the range of 1.5 - 3.0% in the replacement with cement weight content. In the second step, based on the prior experimental results, recycling possibility of WCP in soil cement-based pavement was studied. In the result of experiment the mixing ratio of WCP were 5, 10, 15 and 20% in the replacement with soil weight and the compressive strength of mortar was somewhat decreased according to the increase of the mixing ratio of WCP.

• Journal of the Korean Society for Railway
• /
• v.18 no.5
• /
• pp.401-409
• /
• 2015

Defects generated in a railroad track that guides the railroad vehicle have the characteristic of growing fast; as such, the detection technology for railroad track defects is very important because defects can eventually cause mass disasters like derailments. In this study, a speed-up test facility was fabricated to investigate the feasibility of using magnetic flux leakage (MFL) technology for defect detection in a railroad track under speed-up condition; a test was conducted using a railroad track specimen with defects. For this purpose, an MFL sensor head dedicated to the configuration of the railroad was designed and test specimens with artificial defects on their surfaces were manufactured. Using the test facility, a speed-up test ranging from 4km/h to 12km/h was performed and defects including locations were successfully detected from MFL signals induced by defects with enhanced visibility by differentiating raw MFL signals. In the future, it should be possible to apply this system to a high-speed railroad inspection car by improving the lift-off stability that is necessary for speed-up of the developed MFL sensor system.

• Journal of Korean Clinical Nursing Research
• /
• v.19 no.3
• /
• pp.432-442
• /
• 2013

Purpose: The purpose of this study was to describe restraint use in care of patients with psychiatric disorders in an attempt to avoid unnecessary restraint use and provide information for developing standards regarding restraint use as a therapeutic maneuver. Methods: For this descriptive study, discharge records from N National Mental Hospital in the year 2009 were reviewed by trained nurses during Dec. 24, 2010 and Mar. 31, 2011. There were 596 restrains applied on 232 of 1,322 discharges. Data collected include general characteristic of patients, the frequency of restraint use, time since admission when restraint was applied, time of the day when restraint was applied, duration of restraint application, place of occurrence, reasons for restraint use, and degree of damage to the patent. Work experience of nurses who applied restraints, number of workforce at the time of restraint, and season of the year was also identified. Descriptive statistics, Chi-square test, t-test, ANOVA, $Scheff{\grave{e}}$ and Jonckheere-Terpstra were applied using SPSS 14.0 to analyze the data. Results: There were 596 restraint uses among 232 patients. Restraints were applied most frequently on males in their 40s, patients diagnosed with schizophrenia, and patients repeating admissions more than 6 times. Restraints were frequently applied within first week following admission, between 16:00 and 20:00, and the average duration of restraint was 5 hours. There were significant differences according to diagnoses of patients in the season restraint occured, time, place of occurrence, reason for restraint, and duration of restraint. Patients with alcoholism received longer restraint application. Conclusion: In order to avoid unnecessary restraint use in patients with psychiatric disorders, nurses and other health care team members need to acknowledge a group of patients such as patients with schizophrenia and alcoholism who relatively frequently restrained or receiving longer restraint. Reasonable and careful decision need to be made when applying restraint in the care of patients with alcohol problem.

• The Journal of Engineering Geology
• /
• v.16 no.4 s.50
• /
• pp.393-402
• /
• 2006

The contamination characteristics of BTEX and TPH components in silty soils with the oil leakage event from point source were studied. The over ratios of three soil pollution standard for TPH component were $1.5{\sim}1.7$ times higher than that of BTEX component. The mean and maximum values of BTEX and TPH components with sample points were B-zone > A-zone > C-zone, and the highest concentrations were measured at $1{\sim}2m$ depth below surface. BTEX and TPH components were increased with linear distance in zone within 120 m and 80 m from point source. For the zone more than 120 m, BTEX and TPH concentrations were under soil pollution standard. The cutoff values of indicator kriging using BTEX and TPH components were defined as confirmative limit, warn- ing limit and counterplan limit. The variograms of indicator-transformed data were selected linear model. The contamination ranges of BTEX and TPH components using confirmative limit and warning limit were estimated similar, but the contamination range of those using counterplan limit was much reduced. The maximum contamination probabilities were estimated by probability maps usinB confirmative limit, warning limit and counterplan limit. The maximum contamination probabilities with three soil pollution standard were estimated 26%, 26% and 13% for BTEX component, and 44%, 38% and 26% for TPH component.

• Economic and Environmental Geology
• /
• v.42 no.5
• /
• pp.479-486
• /
• 2009

In natural environments, manganese (Mn) exists in the valence of +2, +3, and +4 and plays a pivotal role as a strong oxidant or reductant in the geochemical cycles of elements. Especially, Mn forms varying (oxyhydr)oxides. The oxidation state of structural Mn is characteristic to each oxide and is one of the most important factors controlling its geochemical behaviors such as solubility, sorption capacity, and redox potential. Therefore, it is important to elucidate processes governing Mn oxidation state in predicting the fate and transport of many redox sensitive elements in the environment. X-ray photoelectron spectroscopy (XPS) is a very useful method to determine the oxidation state of various elements in solid phases. In this study, the oxidation states of structural Mn in MnO, $Mn_2O_3$, $MnO_2$ were assessed based on the binding energy spectra of $Mn2p_{3/2}$ and Mn3s using XPS and were compared with those reported elsewhere. $Mn2p_{3/2}$ binding energies were determined as 640.9, 641.5, 641.8 eV for MnO, $Mn_2O_3$, $MnO_2$, respectively, which indicates that the binding energy increased with increasing Mn oxidation state. It was also noted that Ar etching may cause changes in electronic structure configuration on surface of the original sample.

• Journal of The Korean Association For Science Education
• /
• v.39 no.4
• /
• pp.525-534
• /
• 2019

The purpose of this study is to investigate the influences of Science Core schools on students' positive experiences about science (PES) through in-depth interviews with teachers in charge of science core schools. In-depth interviews with teachers were conducted to explore the factors that led to the effectiveness of science core schools in improving the student's PES in light of operational characteristics of science core schools as leading schools, characteristic factors of science core schools on students PES, and improvement plans and requirements of science core schools as leading schools, as well as implications for general high schools. In the case of science core schools, the teacher's enthusiasm for science teaching encouraged students' participation in science classes, promoted students' interest in science other than science-core classes, improved students' inquiry and research skills, increased students' competencies such as communications and collaboration by improving science instructions, and affected career search and exploration based on interests in science experiences. Based on the results, ways to spread the characteristics of science core schools to general schools' curriculum implementation are suggested including providing opportunities to experience the value of science study, to experience science and engineering careers through senior students, to participate in team projects and self-regulated science inquires, and so on.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.47 no.5
• /
• pp.364-370
• /
• 2019

In this paper, an individual blade control (IBC) methodology is applied to find the best input scenario for vibratory hub loads reduction of XH-59A co-axial rotorcraft in high speed flight. A comprehensive aeromechanics analysis code CAMRAD II is employed to analyze the aircraft. A parametric study is conducted for optimum IBC inputs leading to the maximum vibration reduction. Numerical results demonstrate that up to 50% reduction in the hub vibration index is obtained for an IBC input at 3/rev frequency with the amplitude and phase angle of 0.5 deg. and 300 deg., respectively. The upper rotor exhibits as much as 6% more vibration reduction as compared to that of the lower rotor due to a clean inflow characteristic of the rotor. It is found that further vibration reduction gain is reached for IBC inputs with advancing-side only control. The hub vibration becomes reduced by up to 17% in reference to that with full rotor disk control. It is noted that the additional gain is obtained with significantly less power input with the advancing-side only control.

• Journal of The Korean Society of Emergency Medicine
• /
• v.29 no.5
• /
• pp.430-436
• /
• 2018

Objective: The purpose of this study was to evaluate whether or not the d-dimer level indicating hyperfibrinolysis could be a predictor of early poor outcome (massive transfusion, death within 24 hours) associated with trauma-induced coagulopathy in blunt trauma without significant brain injury. Methods: This study was a retrospective observational study using 516 blunt trauma patients without significant brain injury. The poor outcome group, including patients receiving massive transfusion and those who died within 24 hours, consisted of 33 patients (6.4%). The variables were compared between the poor outcome group and good outcome group, and logistic regression analysis was performed using statistically significant variables. Receiver operating characteristic (ROC) curve analysis was performed to evaluate the poor outcome prediction ability of the initial d-dimer level. Results: The poor outcome group showed more serious anatomical, physiological, and laboratory data than the good outcome group. In the ROC curve analysis for evaluation of the poor outcome prediction of the d-dimer level, the area under the curve value was 0.87 (95% confidence interval [CI], 0.84-0.90) while the cut-off value was 27.35 mg/L. In the logistic regression analysis, the high d-dimer level was shown to be an independent predictor of poor outcome (adjusted odds ratio, 14.87; 95% CI, 2.96-74.67). Conclusion: The high d-dimer level (>27.35 mg/L) can be used as a predictor for the poor outcome of patients with blunt trauma without significant brain injury.

• 한국체육학회지인문사회과학편
• /
• v.58 no.2
• /
• pp.405-416
• /
• 2019

This study aimed to identify the efficiency of short track-related sports injury prevention program consisted of muscle strength and neuromuscular training on non-contact injury incidence and characteristics in knee and ankle joints and low back for elite short track speed skaters. Twenty-five short track athletes who belonged to G-City Team were participated in this study from Nov. 2017 to Jul. 2018. Information on their sports injuries occurred were collected and injury prevention program was applied in their warm-up every training sessions and competition. Also their symptom-level of knee and ankle joint and low back were measured by using OSTRC overuse injury questionnaire and Cumberland ankle instability(CAIT). The injury incidence rate after application of prevention program was 2.79 injuries/1,000 hour exposures(HEs), which was lower than before (3.04 injuries/1,000HEs). The OSTRC score (30.89±28.34 and 23.84±23.61, respectively) in knee and low back after application of prevention program were lower than before (58.47±26.77 and 52.36±21.55, respectively), and the CAIT score (13.47±6.07) in ankle joint after application of program was higher than before (16.26±7.28), which means that their symptom-level was alleviated with sports injury prevention program. In conclusion, the sports injury prevention program designed for short track's motion and characteristic can have positive influences on the occurrence of non-contact injury for short track speed skaters.