• Textile Coloration and Finishing
• /
• v.31 no.1
• /
• pp.25-32
• /
• 2019

The influence of the contact amount of carbon dioxide per unit mass of dyestuff(${\alpha}$) on dyeing uniformity in supercritical fluid dyeing is analyzed in this study. The experiments using a 5L class Pilot Scale dyeing machine is carried out for this study purpose. For a fixed temperature and pressure, the amount of sample and the dyeing leveling time were considered as process variables. The results show that the increase in the amount of the sample causes a higher color difference than the reference sample, and it also increases the amount of residual dye. On the other hand, the color difference tended to decrease with the increase in dyeing time. Based on these results, the correlation between ${\alpha}$ value and dyeing uniformity in supercritical fluid dyeing is obtained.

• Proceedings of the KIEE Conference
• /
• 1997.07d
• /
• pp.1459-1461
• /
• 1997

The microwave dielectric ceramic properties of $CaTiO_3-(Li_{1/2}Nd_{1/2})TiO_3$ were investigated. The solid solution of $CaTiO_3-(Li_{1/2}Nd_{1/2})TiO_3$ had the perovskite structure in the range of all composition. The dielectric constant and temperature coefficient of resonant frequency of solid solution were decreased with the contend of $(Li_{1/2}Nd_{1/2})TiO_3$, whereas, the $Q{\times}f$ value was increased. In the $(1-X)CaTiO_3-X(Li_{1/2}Nd_{1/2})TiO_3$ system, the microwave properties could be controlled by the variation of X, X is weight fraction. Typical value of K=119, $Q{\times}f=2970$ and $TCF=14ppm/^{\circ}C$ were obtained for $0.2CaTiO_3-0.8(Li_{1/2}Nd_{1/2})TiO_3$.

• Journal of the Korean Ceramic Society
• /
• v.38 no.7
• /
• pp.678-682
• /
• 2001

복합 페롭스카이트(P $b_{1-x}$C $a_{x}$)(C $a_{1}$3/N $b_{2}$3/) $O_3$(0.6$\leq$x$\leq$0.8) 세라믹스의 마이크로파 유전특성과 결합원자가사이의 관계에 대하여 고찰하였다. 유전상수(K)는 Ca 치환량이 증가함에 따라 A-자리의 이온반경 세제곱에 비례하여 감소하며, Qf 값은 증가하였다. Ca 치환량이 증가함에 따라 관찰된 이온분극률($\alpha$$_{obs}$)과 이론적인 이온분극률($\alpha$$_{theo}$) 사이의 편차는 3.47%에서 6.37%로 증가하였다. 이는 A-자리 결합원자가의 감소에 따른 결합강도의 감소로 해석하였다. 소결시편의 공진주파수의 온도계수(TCF)는 AB $O_3$페롭스카이트 화합물의 A-자리 결합원자가에 의존하였다.

• Textile Coloration and Finishing
• /
• v.29 no.1
• /
• pp.1-10
• /
• 2017

Blended knit with two or more fiber has various dyeing characteristics depending on dyeing method because of different material properties of them. In this paper, newly developed blended knit was used. It was composed by Acrylate fiber and Dyeable polypropylene(DPP) fiber. As result of build-up dyeing test, acid dyes and disperse dyes respectively had good dyeabilities on 1% o.w.f. with Acrylate fiber and DPP fiber. Compatibility of trichromatic of disperse dyes was generally good for most dyes investigated and their critical absorption range were between $120^{\circ}C$ and $130^{\circ}C$. As depending on dyeing methods, there were many differences in dyeability. It was confirmed that 1-bath-1-step dyeing was most suitable when considering dye exhaustion yield and levelling property. Wash, rubbing and light fastness of knits were generally good in most dyes.

• Textile Coloration and Finishing
• /
• v.34 no.1
• /
• pp.1-9
• /
• 2022

The durable FR treatments such Pyrovatex and Proban have been used for cotton fibers, while the finishes involve toxic ammonia or formaldehyde release during finishing process or finished products. In this study, ecofriendly flame-retardant treatment of cotton fabrics was carried out using UV-curable formulations of Vinyl bisphosphonic acid (VBPA), Acrylaminide and Triacryloylhexahydro-1,3,5-triazine, as a monomer, a comonomer and a cross-linking agent respectively, which can introduce a cross-linked copolymer networks. With an optimal finish formulation, the flame retardancy of LOI 29.8 was maintained even after 10 laundering cycles. In TGA analysis, the DTGA peak decreased from 389℃ to 252℃ and the amount of char yield increased from 6.1% to 46.1% compared to the untreated cotton. In addition, MCC analysis showed that Peak HR and THR decreased by 59.4% and 69.2% respectively, compared to the untreated cotton. The pyrolysis and combustion behaviors of the FR-treated cotton implied a condensed-phase flame-retarding mechanism.

• Textile Coloration and Finishing
• /
• v.20 no.2
• /
• pp.47-52
• /
• 2008

Nylon textured yarn is usually manufactured by disk type false twist texturing. Dyeing properties of nylon textured yam have not been studied yet. In this study, dyeing properties of nylon textured yam according to draw ratio out of process parameters were investigated. The fact that microstructure of nylon textured yarn in amorphous region particularly is transformed by draw ratio was confirmed indirectly by measurement of dyeing rate because dyeing rate was affected by the structure of amorphous region. Dyeing rate at draw ratio 1.29 was the lowest because the higher draw ratio increase amorphous orientation and disturb dye diffusion into amorphous region. The microstructure according draw ratio was indirectly confirmed by 5% strength, tenacity, elongation. But difference in K/S value and fastness was insignificant.

• Textile Coloration and Finishing
• /
• v.23 no.3
• /
• pp.195-200
• /
• 2011

Silicone-coated fabric were treated by oxygen low temperature plasma to improve the adhesion. The surface of silicone-coated fabric was modified with gaseous plasma of several discharge power in the presence of oxygen gas at 1Torr pressure. Oxygen plasma treatment introduces oxygen-containing functional groups and micro-pittings on the silicone-coated fabric surface. The treated fabrics with oxygen low temperature plasma were measured by contact angle analyzer and XPS(X-ray photoelectron spectroscopy), and interfacial adhesion was measured by T-peel test. The surface of fabric was investigated by SEM photographs. The chemical and physical modification of the surface wettabillity by plasma treatment can increase the adhesion.

• Textile Coloration and Finishing
• /
• v.21 no.3
• /
• pp.37-42
• /
• 2009

The low melting PET yarn has sheath/core structure: sheath portion consists of low melting point PET and core portion is regular PET. Dyeing properties of fabric made from low melting PET yarn were investigated at different dyeing temperatures. It was found that the exhaustion yield on the low melting PET fabric was higher than on regular PET fabric. The total K/S value of the dyed low melting PET fabric increased as heat setting temperature increased above $150^{\circ}C$ because the sheath portion of the low melting yarn melted. Although fastness to light of the low melting PET fabric was similar to regular PET fabric, fastness to washing was inferior to regular PET fabric by 1 grade.

• Proceedings of the Korean Information Science Society Conference
• /
• 2002.04b
• /
• pp.595-597
• /
• 2002

MPEG그룹은 미디어 객체를 시간과 3차원 공간상에 배치하여, 멀티미디어 컨텐츠를 표현하고, 사용자의 상호작용을 가능하게 하는 MFEG-4 System물 표준화하였으며, 다양한 전송계층 (File, TCF/IP, Broadcasting등)을 통합하여 처리할 수 있는 MPEG-4 System의 Multimedia Interface Framework)[3] 전송규약을 표준화하였다. 이 논문에서는 MPEG-4 System을 이용하여 비디오, 오디오, 그랙픽과 같은 다양한 미디어들을 결합하해주고 사용자와의 상호작용에 의한 실시간 표현을 가능하게 해주며 사용자가 MPEG-4 Sytem에 대해서 잘 알고 있지 않더라도 손쉽게 MPEG-4미디어 파일을 만들 수 있도록 해주는 저작툴을 제안한다 [1,3,5]

• Textile Coloration and Finishing
• /
• v.21 no.5
• /
• pp.1-9
• /
• 2009

The feasibility of earthworm protease as a new cosmetic material for human hair care was investigated. The effectiveness of the earthworm protease treatment was assessed by thickness change of hairs, optical microscope examination, aminoacid analysis, surface morphology, angular resolution analysis through methylene blue staining method and tensile strength change. The protease treated hair became thinner and the soil on the surface removed in experimental groups unlike control group. Tensile strength decreased in experimental group in which the enzymes may decompose polypeptide bonds.