• 제목/요약/키워드: Tc-To method

검색결과 1,081건 처리시간 0.029초

초전도 나노 합성 기술 (Fabrication Technology of High Tc Superconductor)

  • 이상헌;김찬중
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2006년도 제37회 하계학술대회 논문집 C
    • /
    • pp.1335-1336
    • /
    • 2006
  • A high Tc superconducting with a nominal composition of YBCO wasprpared by the citarte method. The solid precursor produced by the dehydration of the gel at $120^{\circ}C$ for 12h is not in the amorphous state as expected but in a crystalline state. X-ray diffraction peaks of nearly the same angular position as the peaks of high Tc phase were observed in the precursor. After pyrolysis at $400^{\circ}C$ and calcination at $840^{\circ}C$ for 4h, the (001)peak of the high Tc phase was cleary observed. Experimental results suggest that the intermediate phase formed before the formation of the superconducting phase may be the most important factro in determining whether it is easy to form the high Tc phase or not, because the nucleation barriers of the two superconducting phase may be altered by the variation of the crystal structures of those intermediate phase.

  • PDF

열분해법에 의한 전력기기용 고온 초전도체의 합성 (Fabrication of High Tc Superconductor for Electric power transmission)

  • 이상헌
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2005년도 제36회 하계학술대회 논문집 C
    • /
    • pp.1962-1963
    • /
    • 2005
  • A high Tc superconducting with a nominal composition of $Bi_2Sr_2Ca_2Cu_3O_Y$ was Prepared by the citarte method. The solid Precursor produced by the dehydration of the gel at $120^{\circ}C$ for 12h is not in the amorphous state as expected but in a crystalline state. X-ray diffraction peaks of nearly the same angular position as the peaks of high Tc phase were observed in the precursor. After pyrolysis at $400^{\circ}C$ and calcination at $840^{\circ}C$ for 4h, the (001)peak of the high Tc phase was cleary observed. Experimental results suggest that the intermediate phase formed before the formation of the superconducting phase may be the most important factro in determining whether it is easy to form the high Tc phase or not, because the nucleation barriers of the two superconducting phase may be altered by the variation of the crystal structures of those intermediate phase.

  • PDF

BSCCO 초전도 전구체의 합성 (Fabrication of BSCCO High Tc Superconducting Precursor)

  • 이상헌;이영희
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2005년도 제36회 하계학술대회 논문집 C
    • /
    • pp.1964-1965
    • /
    • 2005
  • A high Tc superconducting with a nominal composition of $Bi_2Sr_2Ca_2Cu_3O_Y$ was prepared by the citarte method. The solid precursor produced by the dehydration of the gel at $120^{\circ}C$ for 12h is not in the amorphous state as expected but in a crystalline state. X-ray diffraction peaks of nearly the same angular position as the peaks of high Tc phase were observed in the precursor. After pyrolysis at $400^{\circ}C$ and calcination at $840^{\circ}C$ for 4h, the (001)peak of the high Tc phase was cleary observed. Experimental results suggest that the intermediate phase formed before the formation of the superconducting phase may be the most important factro in determining whether it is easy to form the high Tc phase or not, because the nucleation barriers of the two superconducting phase may be altered by the variation of the crystal structures of those intermediate phase.

  • PDF

BSCCO 초전도 전구체의 합성 (Fabrication of BSCCO High Tc Superconducting Precursor)

  • 이상헌
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2005년도 하계학술대회 논문집 Vol.6
    • /
    • pp.290-291
    • /
    • 2005
  • A high Tc superconducting with a nominal composition of $Bi_2Sr_2Ca_2Cu_3O_Y$ was prepared by the citarte method. The solid precursor produced by the dehydration of the gel at $120^{\circ}C$ for 12h is not in the amorphous state as expected but in a crystalline state. X-ray diffraction peaks of nearly the same angular position as the peaks of high Tc phase were observed in the precursor. After pyrolysis at $400^{\circ}C$ and calcination at $840^{\circ}C$ for 4h. the (001)peak of the high Tc phase was cleary observed. Experimental results suggest that the intermediate phase formed before the formation of the superconducting phase may be the most important factor in determining whether it is easy to form the high Tc phase or not. because the nucleation barriers of the two superconducting phase may be altered by the variation of the crystal structures of those intermediate phase.

  • PDF

열분해법에 의한 고온 초전도 합성 (Fabrication of High Tc Superconductor Using Thermal Pyrolysis)

  • 이상헌
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2006년도 하계학술대회 논문집 Vol.7
    • /
    • pp.85-86
    • /
    • 2006
  • A high Tc superconducting with a nominal composition of $Bi_2Sr_2Ca_2Cu_3O_y$ was prepared by the citarte method. The solid precursor produced by the dehydration of the gel at $120^{\circ}C$ for 12h is not in the amorphous state as expected but in a crystalline state. X-ray diffraction peaks of nearly the same angular position as the peaks of high Tc phase were observed in the precursor. After pyrolysis at $400^{\circ}C$ and calcination at $840^{\circ}C$ for 4h, the (001)peak of the high Tc phase was cleary observed. Experimental results suggest that the intermediate phase formed before the formation of the superconducting phase may be the most important factro in determining whether it is easy to form the high Tc phase or not, because the nucleation barriers of the two superconducting phase may be altered by the variation of the crystal structures of those intermediate phase.

  • PDF

표지시간 변화에 의한 $^{99m}Tc$과 적혈구 표지효율 (Labeling Efficiency of $^{99m}Tc$-Labeled RBC Due to Labeling Time Change)

  • 동경래;김호성;최성관
    • 대한방사선기술학회지:방사선기술과학
    • /
    • 제30권3호
    • /
    • pp.259-263
    • /
    • 2007
  • 본 연구는 $^{99m}Tc$과 방사성 의약품인 적혈구(Erythrocyte)의 표지를 이용하여 신속한 핵의학적 검사를 시행해야 하는 환자들에게 표지효율 저하를 방지하여 영상의 정보를 더욱 정확하게 분석할 수 있도록 하기 위해 변형 체외 표지법을 이용한 방법에서 Stannous chloride($SnCl_2$) 양, 표지시간, 적혈구 농도, 헤모글로빈(Hb) 수치에 따른 변화를 비교하여 분석하였다. 간혈관종 검사와 위장관출혈 검사를 시행한 전체 55명의 환자 중 정상으로 판명된 15명은 정상군, 이상소견으로 판명된 40명은 환자군으로 분리한 후, 환자군 중 적혈구 농도가 정상보다 낮은 환자와 헤모글로빈이 낮은 환자들의 표지시간 변화에 따른 표지효율을 측정하였다. 그 결과 정상인의 경우 Tin의 양이나 표지시간이 표지효율에 미치는 영향은 거의 없는 것으로 나타났으나 환자의 경우에는 표지시간(Incubation time)이 30분보다 60분이 표지효율이 높게 측정되었다. 따라서 적혈구 농도, 헤모글로빈수치, 헤마토크리트 수치가 낮은 환자를 검사할 때 표지시간을 30분보다는 60분에서 시행하여 표지효율을 높여 보다 정확하고 좋은 영상정보를 얻을 수 있을 것이다.

  • PDF

신장이식 공여자에서 99mTc-DTPA를 이용한 Glomerular Filtration Rate 측정과 추정사구체여과율의 비교분석 (Comparative analysis of Glomerular Filtration Rate measurement and estimated glomerular filtration rate using 99mTc-DTPA in kidney transplant donors.)

  • 천준홍;유남호;이선호
    • 핵의학기술
    • /
    • 제25권2호
    • /
    • pp.35-40
    • /
    • 2021
  • 신사구체여과율(glomerular filtration rate, GFR)은 신장 질환의 진단, 치료 및 추적 관찰에 중요한 지표이며, 건강인에서도 약제사용, 신장이식 공여자의 신장 평가 등에 사용된다. GFR 검사의 표준방법은 외인성 표지자인 이눌린(inulin)을 연속 주입하여 측정하는 방법이나, 시간이 많이 소요되고 검사 방법이 복잡하기 때문에, 혈청 크레아티닌 농도로 계산한 추정사구체여과율(estimated glomerular filtration rate, eGFR)을 대신 사용한다. 그러나 크레아티닌은 연령, 성별, 근육량 등에 영향을 받는 것으로 알려져 있으며, 현재 많이 사용되는 추정사구체여과율 공식에는 성인의 경우 Cockroft-Gault 공식, Modification of Diet in Renal Disease(MDRD) 공식, Chronic kidney Disease Epidemiology Collaboration (CKD-EPI) 공식 등이 있고, 소아의 경우 Schwartz 공식을 사용하고 있다. 99mTC diethylenetriaminepentaacetic acid(99mTc-DTPA)를 사용한 신사구체여과율(glomerular filtration rate, GFR) 측정은 이눌린을 대체 할 수 있어 현재 사용되고 있다. 이에 99mTc-DTPA를 이용하여 측정한 신사구체 여과율과 CKD-EPI 공식을 이용한 추정사구체여과율을 비교하여 보았다. 서울 아산병원을 내원한 신장이식 공여자 200명(남성 96명, 여성 104명, 47.3세±12.7)을 대상으로 99mTc-DTPA(0.5 mCi, 18.5 MBq)를 정맥투여 하고 획득된 plasma(Two-plasma-sample-method, TPSM)를 계측하여 신사구체여과율(glomerular filtration rate, GFR)을 측정하였다. 혈청 크레아티닌 농도를 근거로 chronic kidney disease epidemiology collaboration (CKD-EPI) 공식을 이용하여, 추정사구체여과율(estimated glomerular filtration rate, eGFR)을 도출하였다. 신장이식 공여자 200명(남성 96명, 여성 104명, 47.3세±12.7)을 대상으로 99mTc-DTPA를 사용하여 측정된 신사구체여과율 평균값은 97.27±19.46 (GFR, ml/min/1.73m2)이고 CKD-EPI 공식을 이용한 추정사구체여과율 (estimated glomerular filtration rate, eGFR) 평균값은 96.84±17.74(CKD-EPI, ml/min/1.73m2), 혈청 크레아타닌의 농도는 0.84±0.39 (mg/dL)이다. 혈청 크레아티닌 근거 추정사구체여과율에 대한 99mTc-DTPA 신사구체여과율의 회귀식은 Y= 0.5073X + 48.186, 상관계수는 0.698이었다.(P<0.01)혈청 크레아티닌 근거 추정사구체여과율에 대한 99mTc-DTPA 신사구체여과율의 Difference(%)는 1.52±18.28 이었다. 99mTC-DTPA를 이용해서 측정된 신사구체여과율과 혈청 크레아티닌 농도에 기반하여 도출된 추정사구체여과율에 대한 상관계수는 0.698로 중등도 정도의 상관성을 확인할 수 있었다. 이는 추정사구체여과율은 연령, 성별, 근육 양 등 신장 외적인 요소에 영향을 받고 신장질환자를 대상으로 만든 공식을 사용하는 원인에 기인하는 것으로 추정된다. 신장 질환의 진단, 치료 및 추적 관찰, 신장이식 공여자의 신장 평가 등에 사용되는 신사구체여과율 측정에 99mTc-DTPA를 사용함으로써 신뢰성 있는 결과를 임상에 제공할 수 있다.

전기 에너지 저장을 위한 초전도 나노 합성 기술 (Development of the Fabrication Technology of High Tc Superconductor for Electrical Energy Storage)

  • 이상헌
    • 대한전기학회논문지:전기물성ㆍ응용부문C
    • /
    • 제55권9호
    • /
    • pp.442-445
    • /
    • 2006
  • In order to realize the commercial application of HTSC materials, it is necessary to develop the fabrication process of high Tc oxide superconductor materials with desired shape and for practical application and high critical current density as well as good mechanical strength which can withstand high lorenz force generated at high magnetic field. Much studies have been concentrated to develop the fabrication technique for high critical current density but still there are a lot of gap which should be overcome for large scale application of HTSC materials at liquid nitrogen temperature. Recently some new fabrication techniques have been developed for YBaCuO bulk superconductor with high mechanical strength and critical current density. In this project, the establishment of fabrication condition and additive effects of second elements were examined so as to improve the related properties to the practical use of YBaCuO superconductor, and we reported the production of the YBaCuO high Tc superconductor by the pyrolysis method.

무선 ATM에서 타임스탬프 방식을 이용한 셀 스트림 구조와 서비스전송 해석 (Analysis of Cell Stream Scheme and Service Transmission using Time-Stamp Method in the Wireless ATM)

  • 김정호
    • 한국정보처리학회논문지
    • /
    • 제6권8호
    • /
    • pp.2179-2187
    • /
    • 1999
  • 산발적인 지역의 사용자들에 대한 멀티미디어 이동 통신 서비스를 위하여 무선 회선을 이용한 ATM을 적용하는 것이 검토되고 있다. 무선 회선에서 효율적인 ATM 셀 전송으로 TDMA 방식을 적용하는 것이 유효하지만, TDMA와 ATM의 동기/비동기성의 차이로 인한 셀 지연변이를 보상하는 방법과 복수 사용자들에 대한 셀 스트림 다중방법이 요구된다. 본 논문에서는 ATM 셀 지연변이의 보상방식 중에서 많은 이점을 갖는 타임스탬프 방식을 사용하여 마르코프 변조 포이송(MMPP)으로 모델링한 VBR 트래픽 입력인 경우에 대하여 지연변이에 따른 셀 제어시간(Tc)를 최적화한다. 또한, 멀티미디어 이동 통신 서비스를 제공하는 무선 ATM에서의 셀 스트림 재생시 복수 사용자들의 셀 스트림 다중시에 발생하는 셀 지연 변이(CDV)에 적용한 셀 스트림 다중방식을 제안하고, 서비스 전송 특성을 시뮬레이션을 수행하였다. 본 방식의 적용에 따라 CDV 분포폭은 약 1.2Tc 정도로 억제가 가능하여 전체적인 셀 지연변이가 감소되었으며, 셀 스트림을 재생하고, 동시에 복수 셀 스트림을 용이하게 다중화가 가능함을 알 수 있었다.

  • PDF

평면형 다중접합 열전변환기의 특성 (Characteristics of a Planar Multijunction Thermal Converter)

  • 조현덕;김진섭;이종현;이정희;박세일;권성원
    • 대한전자공학회논문지SD
    • /
    • 제38권10호
    • /
    • pp.699-705
    • /
    • 2001
  • 교류의 실용 표준기로 사용하기 위해 TC 1에서 TC 6까지 6개의 평면형 열전변환기를 설계 및 제작하였다. 공기중 및 진공중의 전압 감응도는 TC 6의 경우 열손실이 가장 작아 약 4.03 mV/mW 및 약 6.38 mV/mW의 가장 큰 값을 나타내었다. 열시정수는 히터의 열관성이 가장 부족한 TC 6을 측정하여 약 8 ms를 얻었다. FRDC(fast reversed DC) 방법에 의한 교류-직류 전압 및 전류 변환오차는 40 Hz∼10 ㎑ 주파수 범위에서 1 V 및 5 mA의 정현파 실효전압 및 실효전류를 인가하였을 때 약 ±0.41∼±0.85 ppm 및 약 ±0.15∼±1.16 ppm으로서 실용표준으로 사용하기에 적합하였다.

  • PDF