• Economic and Environmental Geology
• /
• v.36 no.4
• /
• pp.313-320
• /
• 2003

Slope disaster is one of the repeated occurring geological disasters in rainy season resulting in about 23 human losses in Korea every year. The slope disaster, however, mainly depends on the spatial and climate properties. such as geology, geomorphology, and heavy rainfall, and, hence, the prediction or hazard analysis of the slope disaster is a difficult task. Therefore, GIS and various statistical methods are implemented for slope disaster analysis. In particular, GIS technique is widely used for the analysis because it effectively handles large amount of spatial data. The GIS technique. however, only considers the statistics between slope disaster occurrence and related factors, not the mechanism. Accordingly. an infinite slope model that mechanically considers the balance of forces applied to the slope is suggested here with GIS for slope disaster analysis. According to the research results, the infinite slope model has a possibility that can be utilized for landslide prediction and hazard evaluation since 87.5％ of landslide occurrence areas have been predicted by this technique.

• Journal of The Korean Society of Integrative Medicine
• /
• v.8 no.2
• /
• pp.63-73
• /
• 2020

Purpose: To investigate breathing-related changes in the balance ability of healthy adults. Methods: The participants were 36 healthy adults in their 20s and 30s. All participants were trained in three breathing (neutral, thoracic, and abdominal) methods one week before measurements. We used AccuSway to measure each participant's balance ability, using each breathing technique, in two postures (bipedal and unipedal). Results: During the bipedal balance task, abdominal breathing produced significant increases in path length and sway velocity. Abdominal breathing resulted in significant changes in sample entropy at the anteroposterior location compared with neutral breathing (p<.05). In the normalized anteroposterior location, there were significant changes in backward movement during thoracic and abdominal breathing compared with those during neutral breathing (p<.05). During the unipedal balance task, path length and sway velocity increased significantly during voluntary breathing compared with those during neutral breathing (p<.05). There was a significant change in backward movement when abdominal breathing-compared with neutral breathing-was used in the normalized anteroposterior location (p<.05). In the normalized left-right location, there was a significant shift to the right during thoracic breathing compared with that during neutral breathing (p<.05). Conclusion: Compared with neutral breathing, altered voluntary breathing patterns affect balance in healthy adults. Our results indicated that that static balance was more affected by abdominal breathing than by neutral breathing. Future studies should examine variables such as the breathing volume, rhythm, and method.

• International Journal of Advanced Culture Technology
• /
• v.9 no.3
• /
• pp.188-201
• /
• 2021

The purpose of this study is to analyze the effects of online home learning in connection with extracurricular activities for lifelong education for the disabled in university on the cooking aids skills of cafeterias for the job search persons with developmental disabilities. Three people with job search developmental disabilities who have been in a state of unemployment for three years after graduating from a special high school course participated in the experiment. In order to verify the meaningful functional relationship between independent variables and dependent variables, multiple probe design across subjects, one of the main techniques of a single object study, was used. The experimental conditions according to the research design consisted of the steps of baseline, intervention, maintenance, and generalization. The dependent variable of this study is the restaurant cooking aid skills in the cafeteria, and three subskills such as side dish arrangement, sink arrangement, and dish washing were combined by task analysis. And the independent variable of this study was composed of procedures and methods to teach the environment, tools and materials related to the performance of dependent variables to the developmental disabled people at home by using real-time image technique through zoom service, and the contents of the performance by stages of task analysis. In addition, independent variables were applied to the subjects in the course of the extracurricular activities with the theme and contents of lifelong education for the disabled at university. Students who completed the above extracurricular activities practiced the intervention scene of the researcher through the screen sharing of zoom service. As a result, the subjects with developmental disabilities effectively acquired and maintained the positive response performance of dependent variables through independent variables. The subjects also showed high positive responses to generalization tests conducted in kitchens in cafeterias located elsewhere in the same university.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.3C
• /
• pp.141-148
• /
• 2010

Electrical noises like self potential, burst noises and 60-Hz electrical noises are one of the causes to reduce reliability of electrical resistivity survey. Even the PDC-R (Pseudo DC resisitivity) technique, recently developed, is suffering from the problem of low reliability due to electrical noises. That is, both DC-based and AC-based resistivity technique is subject to reliability problem due to electrical noises embedded in urban geotechnical sites. In this research, a new technique to enhance reliability of the PDC-R technique by minimizing influence of electrical noises was proposed. In addition, an automated procedure was also proposed to facilitate data analysis and interpretation of PDC-R measurements. The proposed technique is composed of two steps: 1. to extract information only related with the input current by means of multiple-filter technique, and 2. to undertake a task to sort out signal information only to show stable and reliable characteristics. This automated procedure was verified by a synthetic harmonic wave including DC shift, burst random noises and 60-Hz electrical noises. Also the procedure was applied to site investigation at urban areas for proving its feasibility and accuracy.

• Journal of KIISE:Computer Systems and Theory
• /
• v.34 no.8
• /
• pp.337-347
• /
• 2007

An embedded system is called a multi-mode embedded system if it performs multiple applications by dynamically reconfiguring the system functionality. Further, the embedded system is called a multi-mode multi-task embedded system if it additionally supports multiple tasks to be executed in a mode. In this Paper, we address a HW/SW partitioning problem, that is, HW/SW partitioning of multi-mode multi-task embedded applications with timing constraints of tasks. The objective of the optimization problem is to find a minimal total system cost of allocation/mapping of processing resources to functional modules in tasks together with a schedule that satisfies the timing constraints. The key success of solving the problem is closely related to the degree of the amount of utilization of the potential parallelism among the executions of modules. However, due to an inherently excessively large search space of the parallelism, and to make the task of schedulabilty analysis easy, the prior HW/SW partitioning methods have not been able to fully exploit the potential parallel execution of modules. To overcome the limitation, we propose a set of comprehensive HW/SW partitioning techniques which solve the three subproblems of the partitioning problem simultaneously: (1) allocation of processing resources, (2) mapping the processing resources to the modules in tasks, and (3) determining an execution schedule of modules. Specifically, based on a precise measurement on the parallel execution and schedulability of modules, we develop a stepwise refinement partitioning technique for single-mode multi-task applications. The proposed techniques is then extended to solve the HW/SW partitioning problem of multi-mode multi-task applications. From experiments with a set of real-life applications, it is shown that the proposed techniques are able to reduce the implementation cost by 19.0% and 17.0% for single- and multi-mode multi-task applications over that by the conventional method, respectively.

• Korean Journal of Agricultural Science
• /
• v.43 no.4
• /
• pp.507-521
• /
• 2016

Landslides are one of the most common natural hazards causing significant damage and casualties every year. In Korea, the increasing trend in landslide occurrence in recent decades, caused by climate change, has set off an alarm for researchers to find more reliable methods for landslide prediction. Therefore, an accurate landslide-susceptibility assessment is fundamental for preventing landslides and minimizing damages. However, analyzing the stability of a natural slope is not an easy task because it depends on numerous factors such as those related to vegetation, soil properties, soil moisture distribution, the amount and duration of rainfall, earthquakes, etc. A variety of different methods and techniques for evaluating landslide susceptibility have been proposed, but up to now no specific method or technique has been accepted as the standard method because it is very difficult to assess different methods with entirely different intrinsic and extrinsic data. Landslide prediction methods can fall into three categories: empirical, statistical, and physical approaches. This paper reviews previous research and surveys three groups of landslide prediction methods.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.05a
• /
• pp.409-412
• /
• 2005

Just as the vibration modes of a beam are dependent on its end constraints or boundary conditions. Vibration modes of a tire are dependent on its patch and spindle constraints. This dependence is key to understanding the dynamic properties of a tire and is apparent in various analytical and experimental investigations in the literature. One of the main task in a modal analysis is the measurement of the Frequency Response Function (FRFs). Because all the subsequent analysis is based on these FRFs, their quality is critically important in obtaining accurate modal parameter estimates. In rotating systems, FRFs are frequently contaminated by harmonic peaks related to such factors as imbalance, misalignment. This harmonic peaks appear in the FRFs as sharp spikes, which can be erroneously treated in modal curve-fitting procedures as structural modes. The harmonic peaks removal method is demonstrated by application to modal analysis on rotating tires. The results show substantial improvement in FRF quality.

• Korean Journal of Cognitive Science
• /
• v.19 no.1
• /
• pp.17-39
• /
• 2008

The present study was conducted to provide Korean word association lists for adults and children which are needed in research area of false memory. Associated words, asso[iation strength, and the proportion of cue set size to the total number of associated words produced through the discrete association technique were compared between the two groups. The data showed that associated words with high strength wert same or similar but associated words with lower strength were various in the two groups. The result that adults produced larger proportion of cue set size than children suggests that adults have more typical and more convergent semantic network than children. The present data will be served as a database useful for the studies to investigate cognitive functions in memory and other related area.

• Journal of Korea Multimedia Society
• /
• v.3 no.1
• /
• pp.77-90
• /
• 2000

Real-Time verification is a procedure that verifies the correctness of specification related to requirement in time as well as in logic. One serious problem encountered in the verification task is that the state space grows exponentially owing to the unboundedness of time, which is termed the state space explosion problem. In this paper, we propose a real-time verification technique checking the correctness of specification by showing that a system model described in timed automata is equivalent to the characteristic of system property specified in timed modal-mu calculus. For this, we propose a local model checking method based on the value of the formula in initial state with constructing product graph concerned to only the nodes needed for verification process. Since this method does not search for every state of system model, the state space is reduced drastically so that the proposed method can be applied effectively to real-time system verification.

• Archives of design research
• /
• v.17 no.3
• /
• pp.373-382
• /
• 2004

Video protocol analysis is a popular and effective technique in many research disciplines including industrial design and HCI for understanding the interactions between people, and between people and machines. Analysing and transcribing video recordings is, however, notoriously time consuming, and a variety of single-user computer based tools have been developed to ease the task. This paper examines collaborative video analysis. The motivation for groupware tools for video analysis is described, and the desirable features of such tools are identified. The following section reviews related work on video analysis and on single-user video analysis tools. The review is used to derive a set of design goals for collaborative video analysis tools. We then detail prototype's user interface, its collaborative facilities, and its implementation. The preliminary evaluation is described prior the conclusions which identify directions for further work.