• Science of Emotion and Sensibility
• /
• v.11 no.1
• /
• pp.105-112
• /
• 2008

This study investigated the effect of 40% oxygen administration on the addition task performance in three levels of difficulties and physiological signals. Ten male and female college students were selected as the subjects for this study. The experiment consisted of two runs: one was a addition task, with normal air (21% oxygen) administered and the other was with hyperoxic air (40% oxygen) administered. The experimental sequence in each run consisted of Rest1 (3 min), Task1 (1 min, one digit addition task), Task2 (1 min, two digit addition task), Task3 (1 min, three digit addition task), and Rest2 (4 min). Blood oxygen saturation and heart rate were measured throughout the five phases. The accuracy rates of the addition task were enhanced with 40% oxygen administration compared to 21% oxygen. Difference in the accuracy rates grew higher with the rise of difficulty. When 40% concentration oxygen is supplied, blood oxygen saturation increased and heart rate was decreased comparing to 21%. This study showed that the supply of high concentration oxygen increases blood oxygen saturation, which in turns accelerates brain activation resulting from cognitive process and enhances arithmetic abilities. Particularly when difficulty is high, demand for oxygen increases and, as a result, the effect of high concentration oxygen becomes more significant.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.1109-1114
• /
• 2003

In this paper, task control architecture is proposed for a mobile robot with behaviors based on cognition theory to endow the robot intelligence. In the task control architecture, task manager is introduced especially for the management of computational resource. The management is based on classical RMS (Rate Monotonic Strategy), but with online rate modulation strategy. The rate modulation is performed using the value variances of behavior execution for the task. Because the values are based on natively uncertain sensor information, they are modeled using PDF (probability Density Function). As a rate modulation process, the range of the rate modulation is defined firstly by real-time constraints of RMS and discrete control stability of behaviors. With the allowable range, rate modulations are performed considering harmonic bases to maintain utilization bound without decrease. To evaluate the efficiency of the proposed rate modulation strategy, a simulation test is performed to compare the efficiency between the control architecture with the proposed strategy and previous one. A performance index with the formalization of propensity of resource allocation is proposed and utilized for the simulation test. To evaluate the appropriateness of the performance index, the performance index is compared with practical one through a practical simulation test.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• autumn
• /
• pp.331-334
• /
• 2002

This study proposes a scheme for successful remodeling projects by establishing the task and role of project participants. In doing so, the study investigates the natures and problems of the current remodeling practices through interview and questionnaire survey with experts. This study establishes the critical phase of remodeling process and defines the task and role of project participants at each phase. The related documents of being generated at each phase also match up the task and role. It is expected that this scheme can be applied to deal with conflicts, cost overruns, and delays of time.

• Journal of the Korean Society of Safety
• /
• v.20 no.2 s.70
• /
• pp.61-66
• /
• 2005

This paper presents an human reliability assessment(HRA) for a installation task of the temporary power cable in construction fields. HRA is evolved to ensure that the workers could reliably perform critical tasks such as a process of the temporary power cable. Human errors are extremely commonplace, with almost everyone committing at least some errors every day. The considerable parts of electric shock accidents in the construction field are caused by a series of human errors. Therefore it is required to analyze the human errors contained in the task causing electric shock event, the event tree analysis(ETA) is adopted in this paper, and particularly human reliability was estimated for a installation task of the temporary power cables. It was assumed that the error probabilities of the human actions may be obtained using the technique for human error rate prediction(THERP). The results show that the predominant task on reliability in the cable installation tasks is check-out tasks and the probability causing electric shock by human errors was calculated as $1.0\times10^{-9}$.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.62 no.8
• /
• pp.1192-1197
• /
• 2013

In this paper Ubiquitous Medical Electronic Device Export was defined, and it's job analysis. The authors have been defined the job and classified duties and tasks of Ubiquitous Medical Electronic Device Export. To fine what is the most efficient task for Ubiquitous Medical Electronic Device Export, we have been investigated the levels of importance, difficulty, frequency and entry in each task. A DACUM committee is composed of total 12 members, which are one facilitator, 10 panel members, one coordinator & recorder to analyze the job of Ubiquitous Medical Electronic Device Export. Following is the result of this study. First, The process began with the identification of a job title and definition of Ubiquitous Medical Electronic Device Export. Second, a job model of Ubiquitous Medical Electronic Device Export is constructed based on the results of DACUM job analysis. 5 duties and 33 tasks are analyzed. Third, occupational specification was drawn up in consultation with SME council. Fourth, duty specification was drawn up in consultation. 33 tasks that are essential in entry level of occupation are identified. Fifth, task specification was drawn up in consultation. Detail task component which include skill, materials, knowledge, equipment, achievement level and tool was specified in task specification.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.22 no.4
• /
• pp.42-55
• /
• 2014

The purpose of this research was to identify expertise in ait traffic control by using cognitive skill analysis for novices and experts in routine and non-routine situations. The result of study was to understand expertise in air traffic control tasks in terms of what cognitive processes are responsible for the expert's high performance levels. The problem solving task was difficult for novices, but performed relatively automatically by experts in a routine situation. The difficulty could indicate the presence of controlled processing. Rather than rules and strategies, novices focused more on environmental factors, which merely increase cognitive load. In a non-routine situation, novices showed that they did not categorize the information consistently and alternative resources were not available for them. Experts, however, performed automatically a task by arranging and organizing information related to problem solving components in contexts without regard to a routine and non-routine situation. Especially experts developed a stable representation and directed alternative resources for air traffic flow and efficiency. Based on the results, cognitive processes of experts could be useful to understand expert performance and analyze the learning process, which imply the necessity of developing expertise systematically.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.05a
• /
• pp.499-502
• /
• 2010

Because of the substantial increase in program complexity and appearance of mega program, the needs to devide the program into small task with multiple partitions, and perform a scheduling based on the priority is required. And also, a program can be developed on specific environment according to the diversify of development environment. for instance, there are some restrictions upon O/S environment such as Embedded or Windows. therefore, the adaptive scheduling technique which perform multiple task partitioning process regardless environment or O/S is suggested. In this study, Adaptive scheduling technique algorithm and its application to be described.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.15 no.4
• /
• pp.1426-1447
• /
• 2021

The payoff game between task publishers and users in the mobile crowdsensing environment is a hot topic of research. A optimal payoff selection model based on stochastic evolutionary game is proposed. Firstly, the process of payoff optimization selection is modeled as a task publisher-user stochastic evolutionary game model. Secondly, the low-quality data is identified by the data quality evaluation algorithm, which improves the fitness of perceptual task matching target users, so that task publishers and users can obtain the optimal payoff at the current moment. Finally, by solving the stability strategy and analyzing the stability of the model, the optimal payoff strategy is obtained under different intensity of random interference and different initial state. The simulation results show that, in the aspect of data quality evaluation, compared with BP detection method and SVM detection method, the accuracy of anomaly data detection of the proposed model is improved by 8.1% and 0.5% respectively, and the accuracy of data classification is improved by 59.2% and 32.2% respectively. In the aspect of the optimal payoff strategy selection, it is verified that the proposed model can reasonably select the payoff strategy.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.16 no.4
• /
• pp.87-92
• /
• 2007

The full automation welding has not yet been achieved partly because the mathematical model for the process parameters of a given welding task is not fully understood and quantified. Several mathematical models to control welding quality, productivity, microstructure and weld properties in arc welding processes have been studied. However, it is not an easy task to apply them to the various practical situations because the relationship between the process parameters and the bead geometry is non-linear and also they are usually dependent on the specific experimental results. Practically, it is difficult, but important to know how to establish a mathematical model that can predict the result of the actual welding process and how to select the optimum welding condition under a certain constraint. In this paper, an attempt has been made to develop an neural network model to predict the weld top-bead height as a function of key process parameters in the welding. and to compare the developed models using three different training algorithms in order to select an adequate neural network model for prediction of top-bead height.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2004.10a
• /
• pp.170-174
• /
• 2004

Despite the widespread use in the various manufacturing industries, the full automation of the robotic CO$_2$ welding has not yet been achieved partly because the mathematical model for the process parameters of a given welding task is not fully understood and quantified. Several mathematical models to control welding quality, productivity, microstructure and weld properties in arc welding processes have been studied. However, it is not an easy task to apply them to the various practical situations because the relationship between the process parameters and the bead geometry is non-linear and also they are usually dependent on the specific experimental results. Practically, it is difficult, but important to know how to establish a mathematical model that can predict the result of the actual welding process and how to select the optimum welding condition under a certain constraint. In this paper, an attempt has been made to develop an Radial basis function network model to predict the weld top-bead width as a function of key process parameters in the robotic CO$_2$ welding. and to compare the developed model and a simple neural network model using two different training algorithms in order to verify performance. of the developed model.