• 한국정보통신학회논문지
• /
• 제22권3호
• /
• pp.411-417
• /
• 2018

본 논문에서는 재난재해 또는 보안의 이유로 외부와의 통신이 어려운 상황에서도 운용할 수 있도록 외부 데이터 통신 없이 장비와 스마트폰 간의 무선통신만으로 장비 인식과 매뉴얼 데이터 전송을 수행할 수 있는 온라인 매뉴얼 시스템을 설계하고 구현한다. 매뉴얼 데이터가 내장된 매뉴얼 관리 모듈을 대상 장비에 내장한 후 스마트폰에서 수행되는 매뉴얼 앱은 관리 모듈에 부착된 QR 코드 스캔 또는 NFC 접촉으로 장비를 인식하고, 장비가 인식되면 블루투스 통신을 통해 관리 모듈에 내장된 매뉴얼 데이터를 수신하여 웹 템플릿을 이용하여 화면에 표시한다. 구현된 시스템을 실제 산업용 발전기에 설치하여 정전 발생 시 기존의 3단계 처리 과정을 2단계로 줄일 수 있음을 보였다.

• 기록학연구
• /
• 제24호
• /
• pp.173-214
• /
• 2010

문화자원 기록화에 대한 의미와 필요성에 대한 사회적 인식이 높아지고 있다. 문화자원 중에서도 무형 문화재(無形文化財)는 재현하는 사람이 없거나, 무형문화재 관련 기록이 남아있지 않으면 더 이상 재현이 불가능하다는 점에서 기록화가 무엇보다 중요하다. 이러한 문제의식에서 시작된 본 연구는 강릉단오제의 기록화 방법을 제시하고자 하였다. 본 연구에서는 무형문화재가 생성, 유지되고, 보존되는 생애 전 과정을 고려한 기록화 방안을 설계하고자 하였다. 강릉단오제를 기록화 하기 위한 방안으로 기록화 대상을 지정하였으며, 기록화 대상은 강릉단오제의 본자원과 보조자원으로 구분하였다. 강릉단오제의 본자원과 보조자원의 대상에 대해 업무 프로세스를 세워 업무 행위마다 발생되는 기록과 그 기록을 생산하는 주체, 기록이 생산되는 지점을 파악하였다. 이러한 분석을 통해 도출된 기록화 대상에 대해서는 기록화 방법을 제시하였고, 기록화 주체를 제안하였다.

• Medical Lasers
• /
• 제9권2호
• /
• pp.159-165
• /
• 2020

Background and Objectives The ultimate goal in current skin rejuvenation practice is to achieve a good result with minimal pain and downtime. Nonablative skin rejuvenation (NSR) is one technique. The efficacy of the long-pulsed 1064 nm Nd:YAG laser (LPNDY) has not been assessed in NSR. Materials and Methods Three target areas were selected (bilateral cheeks and glabellar region) in six volunteer subjects. A LPNDY with an integral skin temperature monitor delivered three stacked shots to each target area (1064 nm, 12 mm spot, 13 J/cm², 1 Hz) without any skin cooling or anesthesia. The skin temperature was recorded before, during, and after each set of shots using the system monitor and in real-time using a high-sensitivity (±0.001℃) near-infrared video camera. The skin reaction was observed with the naked eye, and pain and discomfort were assessed by the subjects during and after treatment. Results The subjects reported a mild feeling of heat with no discomfort during or after the test treatments. Mild erythema was observed around the treatment areas, without noticeable edema. A series of three ascending skin temperature stepwise peaks, with a decrease in skin temperature towards the baseline after the third shot, was observed consistently. The mean temperatures for shots 1, 2, and 3 for the cheeks were 39.5℃, 42.0℃, and 44.4℃, respectively, and for the glabella, 40.8℃, 43.9℃, and 46.2℃, respectively. Similar ranges were indicated on the system integral temperature monitor. Conclusion A set of three stacked pulses with the LPNDY at a low fluence achieved ideal dermal temperatures to achieve some dermal remodeling but without any downtime or adverse events. The temperature data from the integral thermal sensor matched the video camera measurements with practical accuracy for skin rejuvenation requirements. These data suggest that LPNDY would satisfy the necessary criteria to achieve effective NSR, but further studies will be needed to assess the actual results in clinical practice.

• 대순사상논총
• /
• 제24_1권
• /
• pp.97-144
• /
• 2014

Jeungsan(甑山) carried out the Universal Redesign(天地公事) through which the former world full of a mutual opposition(相克) can be peacefully transferred into the latter world composed of a mutual beneficence(相生). Although the Universal Redesign consists of such three factors heaven, earth, and human, it converges towards Human Redesign in that humans are the main agents for heaven and earth. Human as Redesign object is characterized as a member of community, not an anarchistic individual. The Universal Resign of Jeungsan is eventually connected with the construction of a country comprising a mutual beneficence in that it is the most typical strain among all the human communities. His Universal Resign for foundering the foremost country does not target all the countries, but only one country upon and through which the world with a mutual beneficence can be formed. He executed the Universal Redesign based on such three principles as Haewon sangsaeng(解冤相生), Boeunsangsaeng(報恩相生), and Wonsibanbon(原始返本), Judging from such principles, Korea can be naturally selected as the target of the Universal Redesign for constructing the foremost country. It is approaching when the Universal Redesign in order to transform Korea into the foremost country comes true. The first step for Korea to be made as the foremost country is the construction of DMZ World Peace Park (DWPP) which was proposed by Bak Geunhye, the Korean President, to Obama, the President of USA, in 2013 she visited there. DWPP can be expected to be a center for corporation and interchange between South and North Korea under the interest and support of the world including UN, furthermore, the Capital area of reunified Korea, and finally the world hub of inter national political and economic relation. DWPP is planned to be built at the core of the best place in Korea which is a propitious spot all over the world, upon which a new world capitalism order armed with mutual beneficence can spread.

• 대한원격탐사학회지
• /
• 제36권2_1호
• /
• pp.139-153
• /
• 2020

본 연구는 전산유체역학(computational fluid dynamics, CFD) 모델을 이용하여 도시 지역에 위치한 도시 대기측정소의 대기질 대표성을 평가하고, 측정 목적에 따른 측정소 위치 선정에 대한 방법론을 제시하였다. 이를 위하여 대상 지역을 은평구 도시대기측정소(air quality monitoring system, AQMS)로 선정하였고 두 가지배출 시나리오(대기오염물질이 배경에서 수송되는 경우, 도로에서 배출되는 경우에 대한 수치 실험을 수행하였다. 대기 흐름은 대상 지역의 북동쪽과 남동쪽에 위치한 산악 지형의 영향을 크게 받고, 건물이 밀집한 지역에서는 2차 순환에 의한 복잡한 흐름이 나타났다. 대기오염물질이 배경에서 수송되는 경우에, 대기오염물질 분포는 지형(산)의 영향을 크게 받았다. 선오염(도로)에서 배출되는 경우에는 도로 위치와 건물 분포/높이 영향을 크게 받았다. 은평구 AQMS 위치에서 수치 모의된 농도는 지형보다 건물의 영향이 크게 나타났다. 배출 시나리오 결과를 이용하여 은평구 AQMS가 대상 지역의 대기질을 대표할 수 있는지에 대하여 평가하였다. 은평구 AQMS 위치에서 모의되는 농도는 두 시나리오의 층 평균 농도와 유사한 크기를 가지고 있어 측정 높이에서의 대기질을 대표할 수 있다고 판단된다. 대기오염물질은 시·공간적으로 비균질적이기 때문에 측정 목적에 따른 고도 별 측정망 위치 선정에 대한 가이드라인을 제시하였다. 측정망을 고농도가 나타나는 지역(hot spot)과 청정 지역(clean zone), 각 층의 평균 농도가 나타나는 지역(average zone), 건물/지형에 가로막혀 흐름의 유입과 유출이 활발하지 않는 안락처 지역(shelter zone), 외부에서 수송되는 배경 농도를 대표할 수 있는 지역(equi-background zone) 등 총 5가지로 분류하여 조사하였다.

• 한국의학물리학회지:의학물리
• /
• 제25권4호
• /
• pp.193-198
• /
• 2014

본 연구의 목적은 새로 개발된 2차원 토모테라피 선량측정 시스템의 가능성을 알아보는 것이다. 방사선이 조사되면 가시광성을 내보내는 인광판을 원통형 물팬텀에 삽입하였다. 치료계획장치에서 원 모양, C자 모양, 다중표적 3종류의 가상의 표적을 만들고 각 표적에 10 Gy의 방사선을 전달하도록 하였다. 원통형 팬텀을 토모테라피 치료테이블위에 올려놓고 치료계획대로 방사선을 조사하였다. CCD카메라로 쵤영된 모든 프레임은 누적되었고 각 픽셀은 선량으로 변환되었다. 인광판으로부터 나온 영상은 치료계획장치에서 계산된 선량분포와 비교하였다. 선량기울기(dose rate)와 픽셀값의 관계그래프는 선량기울기 900 MU/min 까지 포화(saturated)되지 않았다. 인광판의 선형성 보정이 개선된다면 인광판과 CCD카메라를 이용한 토모테라피의 2차원 선량측정이 유용할 것으로 기대한다.

• Journal of Evidence-Based Herbal Medicine
• /
• 제2권1호
• /
• pp.25-31
• /
• 2009

The origin and description of the Herba Plantaginis was contemporarily analyzed (family names, scientific names, target regions, preparation, etc.) by comparison to enormous literature in addition to the external features written in the existing books on traditional Korean medicine. Also, galenical description were analyzed in connection with external morphology, internal morphology, microscopy and five senses. The official documents and ancient documents of other countries were reviewed. The technical books on herbage, published in the country and other countries, were compared with each other. Also, on-the-spot surveys were made to learn specialists' know-how. The description of the collected drugstuffs were analyzed in connection with external morphology (size, color, etc.), internal morphology and microscopy. The results of this study can be applied to the publicity and education of galenical test agencies; the effective management of foods and drugs; the improvement of public medical service; the publicity of galenical safety.

• Journal of Welding and Joining
• /
• 제30권6호
• /
• pp.113-119
• /
• 2012

Ultrasonic bonding is the novel packaging method for flip-chip with high yield and low-temperature bonding. The bonding module is a core part of the bonding machine, which can transfer the ultrasonic energy into the bonding spot. In this paper, we propose topology optimization technique which can make new design of boding modules due to the constraints on resonance frequency and mode shapes. The designed bonding module using topology optimization was fabricated in order to evaluate the bonding performance and reliable operation during the continuous bonding process. The actual production models based on the proposed design satisfied the target frequency range and ultrasonic power. The bonding test was performed using flip-chip with lead-free Sn-based bumps, the results confirmed that the bonding strength was sufficient with the designed bonding modules. Also the performance degradation of the bonding module was not observed after the 300-hour continuous process with bonding conditions.

• 음성과학
• /
• 제14권1호
• /
• pp.37-62
• /
• 2007

The current study examines the role of post-lexical tonal patterns of a prosodic phrase in word segmentation. In a word spotting experiment, native Korean listeners were asked to spot a disyllabic or trisyllabic word from twelve syllable speech stream that was composed of three Accentual Phrases (AP). Words occurred with various post-lexical intonation patterns. The results showed that listeners spotted more words in phrase-initial than in phrase-medial position, suggesting that the AP-final H tone from the preceding AP helped listeners to segment the phrase-initial word in the target AP. Results also showed that listeners' error rates were significantly lower when words occurred with initial rising tonal pattern, which is the most frequent intonational pattern imposed upon multisyllabic words in Korean, than with non-rising patterns. This result was observed both in AP-initial and in AP-medial positions, regardless of the frequency and legality of overall AP tonal patterns. Tonal cues other than initial rising tone did not positively influence the error rate. These results not only indicate that rising tone in AP-initial and AP_final position is a reliable cue for word boundary detection for Korean listeners, but further suggest that phrasal intonation contours serve as a possible word boundary cue in languages without lexical prominence.

• 한국소음진동공학회논문집
• /
• 제15권1호
• /
• pp.29-38
• /
• 2005

The track pull-in behavior analysis in an optical disk drive (ODD) using plane phase and the evaluations for effecting parameters of it are discussed. Track pull-in, track capture procedure to do track following control, is a key factor to increase data transfer rate. First, the relative velocity between the beam spot of an optical pick-up and the target track of an optical disk is analyzed during the track pull-in procedure. In this process, it is showed that the track error signal has nonlinear characteristics which are depending on the time. Second, Runge-Kutta method to solve the nonlinear equation is applied to find the track pull-in behavior, and some optimal parameters to get stable and fast pull-in condition are obtained. Then, the phase plane analysis for track pull-in procedure is presented. Finally, some comments for the simulated results are discussed briefly.