• E2M - 전기 전자와 첨단 소재
• /
• 제11권10호
• /
• pp.53-59
• /
• 1998

Paraelectric lead landthanum titanate(PLT) thin films have been prepared by a reactive dc magnetron sputtering system using a multicomponent metal target. The surface area control of each element on the target markedly facilitates the fabrication of thin films of complex ceramic compounds. A postdeposition heat-treatment was applied to all as-deposited PLT thin films at annealing temperatures up to 75$0^{\circ}C$ for crystalization. The composition of the PLT(28) thin filmannealed at $650^{\circ}C$ was: Pb, 0.73; La, 0.28; Ti, 0.88; O, 2.9. The dielectric constant and dissipation factor of the thin film(200 nm) at low filed measurements (500 Vcm-1) are 1216 and 0.018, respectively. The charge storage density using a typical Sawyer-Tower circuit with a 500 Hz sine wave was 12.5 $\mu$Ccm-2 at the electric field of 200 kVcm-1.

• 한국군사과학기술학회지
• /
• 제5권2호
• /
• pp.207-216
• /
• 2002

In this paper, the study on the behavior of the deformation of brittle material, such as concrete, ceramic, was peformed by comparison of Lagrangian technique and Smoothed Particle Hydrodynamics using commercial nonlinear hydrodynamic numerical program, Autodyn_2D. The effect of SPH technique was proved by investigating the behavior of material deformation, velocity profile and pressure profile.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2021년도 춘계학술대회
• /
• pp.467-469
• /
• 2021

The dendritic molecule has focused on the target material for photodynamic therapy, and used as the energy harvesting molecule for the application of medicinal field. Those molecules have also researched on the molecule design for the preparation of new dendritic material on PDD and PDT. In this presentation, new dendritic molecules are introduced on the development of DPPZ dendritic molecule for PDT and the efficient synthetic process.

• 한국분말재료학회지
• /
• 제23권1호
• /
• pp.8-14
• /
• 2016

A bulk-type Ta material is fabricated using the kinetic spray process and its microstructure and physical properties are investigated. Ta powder with an angular size in the range $9-37{\mu}m$ (purity 99.95%) is sprayed on a Cu plate to form a coating layer. As a result, ~7 mm-sized bulk-type high-density material capable of being used as a sputter material is fabricated. In order to assess the physical properties of the thick coating layer at different locations, the coating material is observed at three different locations (surface, center, and interface). Furthermore, a vacuum heat treatment is applied to the coating material to reduce the variation of physical properties at different locations of the coating material and improve the density. OM, Vickers hardness test, SEM, XRD, and EBSD are implemented for analyzing the microstructure and physical properties. The fabricated Ta coating material produces porosity of 0.11~0.12%, hardness of 311~327 Hv, and minor variations at different locations. In addition, a decrease in the porosity and hardness is observed at different locations upon heat treatment.

• 대한지역사회영양학회지
• /
• 제20권1호
• /
• pp.21-29
• /
• 2015

Objectives: Maintaining a balanced diet is very crucial for adolescents. However, adolescents, who may have a short notion about the amount of food, find it difficult to plan daily meals by applying the target pattern proposed by the Korean Nutrition Society. This study was carried out to revise the target pattern based on cooked dishes instead of raw material food groups as an easier way for Korean adolescents to plan their meals. Methods: Target pattern for Korean adolescents were revised based on the following: $1^{st}$, categorize dish groups, $2^{nd}$, calculate representative values of each dish based on the adolescent' intake amount. $3^{rd}$, assign the recommended number of intake for each dish. Validity of the target pattern for Korean adolescent meal plan was examined by the energy content, energy contribution ratio, and NAR & INQ of nutrients. Results: The 11 dish groups categorized were bab; gook tang gigae; side dishes of meat, fish, egg, legume, kimchi, vegetable, seaweed; and between meal of fruit, and milk dairy product. Based on the representative energy values, recommended number of intake were assigned to each dish. For boys, bab and gook tang gigae: 3 each; meat, fish, egg, and legume: 1 each; kimchi and vegetable: 3 each; seaweed: 1; fruit and milk dairy product: 2 each were assigned. For girls, bab and gook tang gigae: 2 each; meat, fish, egg, and legume: choice of 3 dishes, 1 each; kimchi and vegetable: 3 each; seaweed: 1; fruit and milk dairy product: 2 each were assigned. Energy contents, energy contribution ratio of carbohydrate, protein, and fat for boys and girls were in adequate range. The NARs were 1.0 and INQs were ${\geq}1.0$ for all nutrients examined. Conclusions: Revised dish-based, instead of food-based adolescent target patterns for boys and girls were easier and a valid way of Korean adolescent meal planning.

• 대한기계학회논문집B
• /
• 제23권3호
• /
• pp.352-363
• /
• 1999

Target detection by the infrared imager depends on the apparent temperature difference between the target and the background, so it is essential to predict apparent temperature variations for this purpose. In this study, thermal analysis program Including conduction, convection and radiation is developed and applied to a representative geometry adequate for examining the apparent temperature characteristics. The results show that the longwave emissivity in association with the background temperature affects the apparent temperature strongly but does not affect the physical temperature. It is revealed that the background temperature plays a role of tuning the apparent temperature. As the longwave emissivity decreases, the apparent temperature decreases when the target is hotter than the background, whereas it increases in the reversed situation. These findings imply that an effective surface treatment, such as painting of a less emissive material, may provide a less detection probability and contribute to preventing the target from being detected at night.

• 한국응용과학기술학회지
• /
• 제26권1호
• /
• pp.38-44
• /
• 2009

We proposed the new nano-carbon ball (NCB) materials for eliminating the total volatile organic compounds(TVOCs) from the felt which is built in the car. The concentrations of acetaldehyde and formaldehyde of the original felts were varied upon the different production lots. Acetaldehyde in the felt can be eliminated to target level($0.2{\mu}g$) after introducing 0.5 wt% of NCB into the felt. Detector tube method for analyzing formaldehyde gas was more accurate than HPLC method. Formaldehyde can be eliminated to target level (64 ppb) after introducing 0.5 wt% of NCB into the felt. We also found that TVOC can be reduced to target level ($0.32{\mu}g$) after introducing 2.0 wt% of NCB. Upon introducing small amounts of NCB into the felt, it was possible that the level of formaldehyde, acetaldehyde and TVOC formed from the felts can be reduced to the target level. We also suggest the effective analyzing method of TVOCs.

• 정보과학회 논문지
• /
• 제44권4호
• /
• pp.411-416
• /
• 2017

적외선 표적의 정밀한 모델링을 위해서는 정확한 표면온도 계산이 필요하다. 본 논문에서는 전도, 대류, 복사를 고려한 복합 열해석 모듈을 소프트웨어로 구현하고, 이를 통하여 표적 재질 및 자세, 환경 요건에 따른 표적의 표면온도 해석을 수행 하였다. 구현된 결과는 상용 소프트웨어인 OKTAL-SE 와의 비교를 통하여 결과의 신뢰성을 검증하였다. 그 결과 자체 검증이 완료된 상용 소프트웨어인 OKTAL-SE 와 약 1% 이내의 오차를 보였다. 계산된 온도 결과를 바탕으로 적외선 표적 모델링을 수행하였으며 OKTAL-SE와의 연동을 통해 적외선 신호 해석을 수행하였다.

• 한국표면공학회지
• /
• 제44권5호
• /
• pp.185-189
• /
• 2011

$Cu_2ZnSnSe_4$ thin films for solar absorber application were prepared by pulsed laser deposition of a synthesized $Cu_2ZnSnSe_4$ compound target. The film's composition revealed that the deposited films possess an identical composition with the target material. Further film compositional control toward a stoichiometric composition was performed by optimizing substrate temperature, deposition time and target rotational speed. At the optimum condition, X-ray diffraction patterns of films showed that the films demonstrated polycrystalline stannite single phase with a high degree of (112) preferred orientation. The absorption coefficient of $Cu_2ZnSnSe_4$ thin films were above 104 cm.1 with a band gap of 1.45 eV. At an optimum condition, films were identified as a p type semiconductor characteristic with a resistivity as low as $10^{-1}{\Omega}cm$ and a carrier concentration in the order of $10^{17}cm^{-3}$.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part2
• /
• pp.729-730
• /
• 2006

The research involves the development of a powder metallurgical route for producing good quality TiAl targets for making physical vapour deposition (PVD) coatings. Mixtures of elemental titanium and aluminium powders were mechanically milled using a novel discus milling technique under various conditions. Hot isotropic pressing (HIP) was then employed for consolidation of the mechanically alloyed powders. A cathodic arc vapour deposition process was applied to produce a TiAlN coating. Microstructural examination was conducted on the target material and PVD coatings, using X-ray diffractometry (XRD), X-ray photoelectron spectrometry (XPS) and scanning electron microscopy (SEM). It has been found that combining mechanical alloying and HIP enable us to produce fairly good quality of TiAl based target. The PVD coatings obtained from the TiAl target showed very high microhardness values.