• Journal of Mechanical Science and Technology
• /
• v.20 no.12
• /
• pp.2124-2135
• /
• 2006

In this paper, the reliability estimation of pipelines is performed by employing the probabilistic method, which accounts for the uncertainties in the load and resistance parameters of the limit state function. The FORM (first order reliability method) and the SORM (second order reliability method) are carried out to estimate the failure probability of pipeline utilizing the FAD (failure assessment diagram). And the reliability of pipeline is assessed by using this failure probability and analyzed in accordance with a target safety level. Furthermore, the MCS (Monte Carlo Simulation) is used to verify the results of the FORM and the SORM. It is noted that the failure probability increases with the increase of dent depth, gouge depth, operating pressure, outside radius, and the decrease of wall thickness. It is found that the FORM utilizing the FAD is a useful and is an efficient method to estimate the failure probability in the reliability assessment of a pipeline. Furthermore, the pipeline safety assessment technique with the deterministic procedure utilizing the FAD only is turned out more conservative than those obtained by using the probability theory together with the FAD. The probabilistic method such as the FORM, the SORM and the MCS can be used by most plant designers regarding the operating condition and design parameters.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.11 no.4
• /
• pp.59-67
• /
• 2008

In the next near future, the human would like to use the small unmanned ground vehicle(SUGV) on the diverse fields. Specially the world of today is tried to apply with operating the task on very difficult working environments such as some dangerous or unreachable area. To work this task, this vehicle should be guaranteed with the high level of reliability, safety, and performance. In this paper, we propose to focus on not only the functional requirements, but also the non-functional requirements based on software architecture at the design stage for developing the embedded system. Through focusing on the non-functional requirements on this software architecture, we can obtain the design goal of the target system and also show the enhancement of reliability, safety and performance with 'Vtune' performance analysis tool.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.26 no.6
• /
• pp.212-221
• /
• 2022

In this paper, the evaluation procedure applying the limit state design method is studied to be consistent with the newly issued bridge design code in Korea. The live load factor for evaluation is proposed by calibrating for the target reliability index through reliability analysis. Using the actual bridge information collected for the representative bridge types in Korea, the load effects of the design live loads for the previous and current design codes are calculated and compared. The live load factor is calibrated through reliability analysis using the minimum required strength which equals to the load effect obtained for the example bridge. Bridge evaluation is performed by applying the live load factors for the evaluation level as well as design level. The load rating result is generally increased by applying the limit state design method compared to the previous design method and applying the proposed load factor for lowered target reliability index further increased the rating result.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.1C
• /
• pp.19-29
• /
• 2008

As a part of study to develop LRFD (Load and Resistance Factor Design) codes for foundation structures in Korea, reliability analyses for driven steel pipe piles are performed and the target reliability indices are selected carefully. The 58 data sets of static load tests and soil property tests conducted in the whole domestic area were collected and analyzed to determine the representative bearing capacities of the piles. The static bearing capacity formula and the Meyerhof method using N values are applied to calculate the expected design bearing capacity of the piles. The resistance bias factors were evaluated for the two static design methods by comparing the representative bearing capacities with the design values. Reliability analysis was performed by two types of advanced methods: First Order Reliability Method (FORM), and Monte Carlo Simulation (MCS) method using resistance bias factor statistics. The static bearing capacity formula exhibited relatively small variation, whereas the Meyerhof method showed relatively high inherent conservatism in the resistance bias factors. Reliability indices for safety factors in the range of 3 to 5 were evaluated respectively as 1.50~2.89 and 1.61~2.72 for both of the static bearing capacity formula and the Meyerhof method. The target reliability indices are selected as 2.0 and 2.33 for group pile case and 2.5 for single pile case, based on the reliability level of the current design practice and considering redundancy of pile group, acceptable risk level, construction quality control, and significance of individual structure.

• Korean Security Journal
• /
• no.40
• /
• pp.57-86
• /
• 2014

As the revision of Building Code including applying crime prevention design to buildings passed recently and target hardening ought to be evidence-based, we studied the Modus Operandi (MO) and intrusion tools of domestic burglary to earn basic data for improvement of crime prevention hardware in the future. To be specific, we reviewed related academic literature and police official statistics of domestic burglary critically and interviewed detectives in charge of burglary to specify and categorize MO and tools. We can derive some implications from research findings, including improvement of the statistical system for the MO of burglary, active sharing of the MO of burglary among the criminal justice agencies and related industries and experts. Also, crime prevention advice and education for the local residents focused on MO of burglary can be recommended. Based on this research, to enhance the level of community safety significantly, performance tests of crime prevention hardware such as security doors and windows etc. and the study on related certification system should be vitalized.

• Journal of Digital Convergence
• /
• v.12 no.2
• /
• pp.423-430
• /
• 2014

Patient safety culture for the general hospital to investigate the perception of radiological technologists, managing of the patient safety provides the Foundation for the safety activities as a basis to develop a program for providing. Patient safety culture for the general hospital to investigate the perception of Radiological technologists, the duration of the survey of the study on June 13, 2012 to June 20, and five general hospitals worked on Radiological technologists workers were material and analyzed the target of 198 (SPSS ver. 19.0). Patient safety activities within the Department, the factors affecting direct care, communication, medical malpractice, hospitals rated, safe for the patient safety culture and the reported accidents, dangerous and caused an accident, most feel that patient safety incident reporting system according to the results of evaluating medical accidents patient safety culture regarding recognition, work appeared in more than 25 years, even the most highly evaluated, the working period of 10 patient safety to 15 years the most highly. Therefore, General Hospital, Director of the patient safety culture improvement of radiation in order to have sufficient staffing, aggressive approach to patient safety issues, and safe working period of relapse prevention of accidents to the radiation as well as giving systematic consideration of mission medical accident reporting system will be active.

• Nutrition Research and Practice
• /
• v.6 no.6
• /
• pp.542-550
• /
• 2012

This pilot study was performed to produce data of the Children's Dietary Life Safety (CDLS) Index which is required by the Special Act on Safety Management of Children's Dietary Life and to evaluate the CDLS Index for 7 metropolitan cities and 9 provinces in Korea. To calculate the CDLS Index score, data regarding the evaluation indicators in the children's food safety domain and children's nutrition safety domain were collected from the local governments in 2009. For data regarding the indicators in the children's perception & practice domain, a survey was conducted on 2,400 5th grade children selected by stratified sampling in 16 local areas. Relative scores of indicators in each domain were calculated using the data provided by local governments and the survey, the weights are applied on relative scores, and then the CDLS Index scores of local governments were produced by adding scores of the 3 domains. The national average scores of the food safety domain, the nutrition safety domain and the perception and practice domain were 23.74 (14.67-26.50 on a 40-point scale), 16.65 (12.25-19.60 on a 40-point scale), and 14.88 (14.16-15.30 on a 20-point scale), respectively. The national average score of the CDLS Index which was produced by adding the scores of the three domains was 55.27 ranging 46.44-58.94 among local governments. The CDLS Index scores produced in this study may provide the motivation for comparing relative accomplishment and for actively achieving the goals through establishment of the target value by local governments. Also, it can be used as useful data for the establishment and improvement of children's dietary life safety policy at the national level.

• Journal of Applied Biological Chemistry
• /
• v.57 no.3
• /
• pp.235-242
• /
• 2014

The purpose of this study is the establishment of scientific processes for making food safety policies. Thus, we investigated pesticide residue level of the agricultural commodities from market, and performed risk assessment. Fifteen agricultural items are chosen based on the frequency of Korean consumption. The samples were collected from 9 cities where populations are more than one million. Total 283 active ingredients were monitoring ( total sample number =232). Single-analysis of target pesticides was for three kinds of possible growth regulators and the multicomponent analysis was for 280 kinds of pesticides, a total of 283 species were selected to perform the pesticide residues. Before monitoring the analytes, the improvements of the analytical methods were done by method validations under the CODEX analytical method development guidelines and can produce metrics that represent the international standards applied in accordance with the guidelines. In addition to residual pesticides detected during monitoring we compare the ADI to EDI values using detected result and dietary consumption data which is extracted from annual market basket survey. The 163 samples were non-detected in the total 232 samples so it means that every agricultural commodity will residual pesticides-free in 70.3%. The detected residual pesticides showed for a total of 69 cases (29.7%). Two of samples violate Korean MRL (0.9%). The ratio of EDI compared to ADI resulted in only from 0.00087 to 0.902%. In result, we can assume that all detected residual pesticides are very safe level and current policies of Korean pesticides control may be working.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 1998.10a
• /
• pp.51-58
• /
• 1998

This study is to define the Automated Container Terminal(ACT) and container terminal system. Also, we analyze the present condition of the container terminal system in Pusan port and its automation level by systems approach. And this paper aims at evaluating on the priority of R&D investment until the beginning of the second stage of New Pusan Port Project(2006). In this process we have considered 8 factors (cost, labor, area, time volume, reliability, safety, convenience) to analyze 6 subsystems. The priority order of R&D until target year by sub-systems is as follow : Cargo Handling System〉Transfer System〉Port Entry System〉Storage System(Distribution&Manufacturing System included)〉Inland Transport System〉Port Information System.

• Journal of Korean Institute of Industrial Engineers
• /
• v.37 no.1
• /
• pp.30-40
• /
• 2011

In recent years, driver information systems (DIS's) became popular and the use of DIS's increased significantly. A majority of DIS's provides touch-screen interfaces because of intuitiveness of the interaction and the flexibility of interface design. In many cases, touch-screen interfaces are mainly manipulated by fingers. In this case, investigating the effect of touch-key sizes on usability is known to be one of the most important research issues, and lots of studies address the effect of touch-key size for mobile devices or kiosks. However, there is few study on DIS's. The importance of touch-key size study for DIS's should be emphasized because it is closely related to safety issues besides usability issues. In this study, we investigated the effect of touch-key sizes of DIS's while simulated driving (0, 50, and 100km/h) considering driving safety (lateral deviation, velocity deviation, total glance time, mean glance time, total time between glances, mean number of glances) and usability of DIS's (task completion time, error rate, subjective preference, NASA TLX) simultaneously. As a result, both of driving safety and usability of DIS's increased as driving speed decreased and touch-key size increased. However, there were no significant differences when touch-key size is larger than a certain level (in this study : 17.5mm).