• Journal of Korean Society on Water Environment
• /
• v.28 no.5
• /
• pp.669-675
• /
• 2012

Recently, there have been active researches regarding endocrine-disrupting chemicals (EDCs). In this study, fifteen small freshwater streams in Cholla-namdo province, South Korea were investigated with respect to the concentration of the endocrine disruptors - Bisphenol A (BPA), styrene monomer (SM), styrene dimer (SD), and styrene trimer (ST) by gas chromatography-mass spectrometry (GC-MS). Measured concentration of the target compounds in the sampled water ranged from

• Journal of Environmental Science International
• /
• v.19 no.1
• /
• pp.1-8
• /
• 2010

Only limited information is available on the measured exposure levels of residents according to the construction age of apartments. As such, present study was conducted to measure and to compare the bedroom, living-room, and outdoor air levels of MTBE and benzene, toluene, ethyl benzene and m,p-xylene(BTEX) in both newer and older apartments. For both newer and older apartments, all the compounds except for MTBE showed significantly higher levels in bedrooms or living-rooms as compared to the outdoor concentrations. The ratio of bedroom or living-room median concentration to outdoor concentration was close to 1 for MTBE, whereas it was larger than 1 for other target compounds. It was also found that the bedroom and living-room appeared to have similar indoor sources and sinks for BTEX, but not for MTBE. The median concentration ratios of the newer apartments to the older apartments ranged from 1.63 to 1.81, depending upon the compounds. In contrast, the MTBE concentrations did not differ significantly between the newer and older apartments, thereby suggesting that although newer buildings could emit more VOCs, this is not applicable to all VOCs. Conclusively, the findings of present study should be considered, when designing exposure studies associated with VOC emissions in buildings and/or managing indoor air quality according to construction age of buildings.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.216-217
• /
• 2008

Zinc-oxide films were deposited by pulsed laser deposition (PLD) technique using doped ZnO target (mixed $In_2O_3$ 0.1, 0.3, 0.6 at. % - atomic percentage) on the p-type Si(111) substrate. A little Indium has added at the n-ZnO films for the electron concentration control and enhanced the electrical properties. Also, post thermal annealed ZnO films are shown an enhanced structural and controled electron concentration by the annealing condition for the hetero junction diode of a better emitting characteristics. The electrical and the diode characteristics of the ZnO films were investigated by using Hall effect measurement and current-voltage measurement.

• Toxicological Research
• /
• v.25 no.1
• /
• pp.41-45
• /
• 2009

This study was conducted to monitor the level of bifenthrin residues in pear sprayed with 2% bifenthrin wettable powder (WP) at the recommended rate at four different schedules prior to harvest. The target analyte was extracted with acetone, partitioned into dichloromethane, and then purified by florisil chromatographic column. The residue determination was performed on a DB-5 capillary column using GC with electron capture detector (ECD). Linearity of this method was quite good ($r^2$ = 0.9951) in the concentration ranged from 0.2 mg/kg to 10 mg/kg. Recovery test was carried out at two concentration levels, 0.2 mg/kg and 1.0 mg/kg, in three replicates, and their rates were from 82.9% to 107.2%. No quantitative bifenthrin was detected in pear of all kinds of treatments including the treatment sprayed 4 times until 7 days before harvest. This sensitive and selective method can be used to monitor the trace residual amounts of bifenthrin in pear in a quite low concentration level.

• Journal of Wellbeing Management and Applied Psychology
• /
• v.4 no.3
• /
• pp.23-33
• /
• 2021

Purpose: In the course of the domestic environmental impact assessment, the current status survey was improperly conducted, and the issue of false and inaccurate environmental impact assessment reports has been raised several times recently through media reports. Research design, data and methodology: There is a continuous demand for improvement measures for the current status measurement method, such as having difficulties in securing a normal measurement date in consideration of equipment operation and rainfall days in the field. Results: In addition, in order to grasp the general air quality status of the evaluation target area, it is necessary to check the various current status concentrations by season and time series per year. However, there is a problem that is currently being carried out based on limited results such as measurement for 1 day or 3 days. Conclusions: Therefore, in this study, based on the national atmospheric measurement network, an inverse distance weighted (IDW) interpolation method was applied to calculate the current state concentration. This study suggested a method to use it in preparing the air quality item in the environmental impact assessment report.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.10 no.4
• /
• pp.197-209
• /
• 2014

The smart paradigm in the modern society is bringing about a rapid smart sensation and there are means of informational communications being developed with the smart technology in various fields. Accordingly, for an effective smart education, it is necessary to create the customized educational contents for the learners, the users of the education. In this study, the contents of smart education are categorized based on the user experiences. As a result of the analysis, the 3 types of UX are found to have a playful influence on the learning concentration and it is also deduced that such concentration of a learner positively affects his or her attitude towards learning. Moreover, by the age and gender groups, there were differences in the preferences for each of the UX type, so that, in result, gave the valid data for designing and applying the suitable UX type for creating contents of smart education for different main target groups.

• Transactions of the Korean hydrogen and new energy society
• /
• v.34 no.1
• /
• pp.38-46
• /
• 2023

Carbon neutrality policies have been strengthened to reduce emissions, and the importance of technology road maps has been emphasized. In the global industrial boiler market, carbon neutrality is implemented through fuel diversification of methane-hydrogen mixture gas. However, various problems such as flashback and flame unstability arise. There is a limit to implementing the actual system as it remains in the early stage. Therefore, it is necessary to secure the source technology of methane-hydrogen hybrid combustion system applicable to industrial fields. In this study, control program for methane-hydrogen fuel conversion was developed to expect various parameters. After determining the hydrogen mixing ratio and the input air flow, the fuel conversion control algorithm was constructed to get the parameters that achieve the target oxygen concentration in the exhaust gas. LabVIEW program was used to derive correlations among hydrogen mixing rate, oxygen concentration in exhaust gas, input amount of air and heating value.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2011.10a
• /
• pp.41.2-41.2
• /
• 2011

Display 산업의 확대로 인해 광학적 특성 및 전기적 특성이 우수한 TCO (Transparent conductive oxide) 연구가 활발히 진행되고 있다. 기존에는 ITO가 대부분의 분야에서 이용되었지만 In의 경제적인 단점으로 인해 새로운 대체물로써 ZnO가 떠오르고 있다. ZnO는 전형적인 n-type 반도체이며, wide band gap 물질로써 Al, Ga, B과 같은 3 족 원소를 doping 함으로써 광학적 및 전기적 특성을 향상시킬 수 있다. 최근에는 ZnO의 이온반경과 비슷한 Ga을 도핑한 Ga-doped ZnO 박막에 대한 연구가 활발히 진행되고 있다. 이는 ZnO에 Ga을 도핑함으로써 격자결함을 최소화 시키고 carrier concentration 및 hall mobility를 향상시켜 전기전도도의 향상을 이루기 때문이다. 본 연구에서는 $Ga_2O_3$이 3wt% doping 된 ZnO rotating cylindrical target 을 DC magnetron sputtering 을 이용하여 2 kW의 파워와 70 kHz의 주파수를 고정하고, 증착 온도를 변화시켜 유리 기판 위에 Ga-doped ZnO 박막을 증착 하였다. 증착 시 온도가 Ga-doped ZnO 박막에 미치는 영향을 관찰하기 위해 박막 표면의 조성을 분석하였고, 결정성 및 전기적 특성의 변화를 통해 박막의 특성을 비교 평가하였다. Ga-doped ZnO 박막의 표면과 두께는 SEM (Scanning electron microscope) 분석을 통해 관찰하였고, XRD (X-ray diffractometer) 를 이용하여 결정학적 특성을 확인하였다. 또한 Van der Pauw 방법을 이용한 hall 측정을 통해 resistivity, carrier concentration, hall mobility를 분석하였고, UV-Vis를 이용하여 박막의 투과율을 분석하였으며, 이를 토대로 투명 전도막으로써 Ga-doped ZnO 박막의 응용 가능성을 평가하였다.

• Journal of Korean Neurosurgical Society
• /
• v.58 no.1
• /
• pp.1-8
• /
• 2015

Treatment of Leptomeningeal carcinomatosis (LMC) from solid cancers has not advanced noticeably since the introduction of intra-cerebrospinal fluid (CSF) chemotherapy in the 1970's. The marginal survival benefit and difficulty of intrathecal chemotherapy injection has hindered its wide spread use. Even after the introduction of intraventricular chemotherapy with Ommaya reservoir, frequent development of CSF flow disturbance, manifested as increased intracranial pressure (ICP), made injected drug to be distributed unevenly and thus, the therapy became ineffective. Systemic chemotherapy for LMC has been limited as effective CSF concentration can hardly be achieved except high dose methotrexate (MTX) intravenous administration. However, the introduction of small molecular weight target inhibitors for primary cancer treatment has changed the old concept of 'blood-brain barrier' as the ultimate barrier to systemically administered drugs. Conventional oral administration achieves an effective concentration at the nanomolar level. Furthermore, many studies report that a combined treatment of target inhibitor and intra-CSF chemotherapy significantly prolongs patient survival. Ventriculolumbar perfusion (VLP) chemotherapy has sought to increase drug delivery to the subarachnoid CSF space even in patients with disturbed CSF flow. Recently authors performed phase 1 and 2 clinical trial of VLP chemotherapy with MTX, and 3/4th of patients with increased ICP got controlled ICP and the survival was prolonged. Further trials are required with newly available drugs for CSF chemotherapy. Additionally, new LMC biologic/pharmacodynamic markers for early diagnosis and monitoring of the treatment response are to be identified with the help of advanced molecular biology techniques.

• Journal of Biosystems Engineering
• /
• v.41 no.2
• /
• pp.138-144
• /
• 2016

Purpose: Phosphorus is an essential element for water quality control. Excessive amounts of phosphorus causes algal bloom in water, which leads to eutrophication and a decline in water quality. It is necessary to maintain the optimum amount of phosphorus present. During the last decades, various studies have been conducted to determine phosphorus content in water. In this study, we present a comprehensive overview of colorimetric, electrochemical, fluorescence, microfluidic, and remote sensing technologies for the measurement of phosphorus in water, along with their working principles and limitations. Results: The colorimetric techniques determine the concentration of phosphorus through the use of color-generating reagents. This is specific to a single chemical species and inexpensive to use. The electrochemical techniques operate by using a reaction of the analyte of interest to generate an electrical signal that is proportional to the sample analyte concentration. They show a good linear output, good repeatability, and a high detection capacity. The fluorescence technique is a kind of spectroscopic analysis method. The particles in the sample are excited by irradiation at a specific wavelength, emitting radiation of a different wavelength. It is possible to use this for quantitative and qualitative analysis of the target analyte. The microfluidic techniques incorporate several features to control chemical reactions in a micro device of low sample volume and reagent consumption. They are cheap and rapid methods for the detection of phosphorus in water. The remote sensing technique analyzes the sample for the target analyte using an optical technique, but without direct contact. It can cover a wider area than the other techniques mentioned in this review. Conclusion: It is concluded that the sensing technologies reviewed in this study are promising for rapid detection of phosphorus in water. The measurement range and sensitivity of the sensors have been greatly improved recently.