• Smart Structures and Systems
• /
• v.15 no.3
• /
• pp.609-625
• /
• 2015

Management of infrastructure stock is essential in sustainability of society, and its analysis and optimization are studied in the light of control system modeling in this paper. At the first part of the paper, cost of stock management is analyzed based on macroscopic statistics on infrastructure stock and economical growth. Stock management burden relative to economy is observed to become larger at low economic growth periods in developed economies. Then, control system modeling of stock management is introduced and by augmenting maintenance actions as control input, dynamic behavior of stock is simulated and compared with existing time history statistics. Assuming steady state conditions, applicability of the model to cross sectional data is also demonstrated. The proposed model is enhanced so that both preventive and corrective maintenance can be included as system inputs, i.e., feedforward and feedback control inputs. Optimal management strategy to achieve specified deteriorated stock level with minimal cost, expressed in terms of preventive and corrective maintenance actions, is derived based on estimated parameter values for corrosion of steel bridges. Relative cost effectiveness of preventive maintenance is shown when target deteriorated stock level is lower.

• Journal of Internet Computing and Services
• /
• v.24 no.6
• /
• pp.155-160
• /
• 2023

In principle, data from all databases and systems managed by the Ministry of Defense or public institutions must be guaranteed to have a certain level of quality or higher, but since most information systems are built and operated, data quality management for all systems is realistically limited. Most defense data is not disclosed due to the nature of the work, and many systems are strategically developed or integrated and managed by the military depending on the need and importance of the work. In addition, many types of data that require data quality management are being accumulated and generated, such as sensor data generated from weapon systems, unstructured data, and artificial intelligence learning data. However, there is no data quality management guide for defense data and a guide for selecting quality control targets, and the selection criteria are ambiguous to select databases and systems for quality control of defense data according to the standards of the public data quality management manual. Depends on the person in charge. Therefore, this paper proposes criteria for selecting a target system for quality control of defense data, and describes the relationship between the proposed selection criteria and the selection criteria in the existing manual.

• Journal of Information Technology Applications and Management
• /
• v.10 no.2
• /
• pp.33-41
• /
• 2003

It is not easy to find desired information in the world wide web. In this research, we introduce a notion of concept network that is useful in finding information if it is used in search engines that are specialized in domains such as medicine, law or engineering. The concept network that we propose is a network in which nodes represent significant concepts in the domain, and links represent relationships between the concepts. We may use the concept network constructor as a preprocessor to speci-alized search engines. When user enters a target word to find information, our system generates and displays a concept network in which nodes are con-cepts that are closely related with the target word. By reviewing the network, user may confirm that the target word is properly selected for his intention, otherwise he may replace the target word with better ones discovered in the network. In this research, we propose a detailed method to construct concept net-work, implemented a prototypical system that constructs concept networks, and illustrate its usefulness by demonstrating a practical case.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.20 no.3
• /
• pp.35-43
• /
• 2012

Medium size rotorcraft consist of approximately 5,000 key components. The components must satisfy the target weight and performance requirement through optimization. Therefore a rotorcraft component has approximately 100 times higher unit cost for mass production than the equivalent of an automobile's, along with huge development cost. Configuration management consists of four main parts : configuration identification, configuration control, configuration audit, and data management. In development programme, configuration management is one of the methods to save development cost, and setting a well-structured configuration management system according to the Military Standard is an important factor in success of the programme. The paper proposes a configuration management system suitable for development of various multi-use components development and presents that the configuration management was performed successfully during dual-use component development programme using the established system.

• Journal of the Society of Disaster Information
• /
• v.19 no.3
• /
• pp.490-497
• /
• 2023

Purpose: Since the 1990s, Korea has been making various efforts to prevent serious industrial accidents, such as implementing a hazardous risk prevention plan and implementing a process safety management system, but a series of recent major industrial accidents have shown its limitations. Therefore, this study aims to present measures to improve safety management of PSM target workplaces. Method: Investigate previous studies and cases on improving safety management at workplaces subject to PSM, seek ways to improve safety management at workplaces subject to PSM based on existing safety management, and evaluate safety management system one of the causes of accidents. Therefore, a safety education program is established to increase employees' safety awareness and understanding, and to improve the safety level. Result: Measures such as establishing an organizational culture to improve safety management of PSM target workplaces, responding to disasters, systematic safety management, replacing and strengthening old facilities, and strengthening management's firm commitment to safety were presented. Conclusion: Through this study, it is meaningful to present a systematic plan to secure safety to reduce precious lives and damage, and it is expected to be useful in considering the direction of PSM improvement for each workplace.

• Journal of Biosystems Engineering
• /
• v.39 no.2
• /
• pp.134-141
• /
• 2014

Purposes: This study was to validate the Robotic Smart Work System that can provides better working conditions and high productivity in unstructured environments like bio-industry, based on a tele-operation system for fruit harvesting with low cost 3-D positioning system on the laboratory level. Methods: For the Robotic Smart Work System for fruit harvesting and cultivation management in agriculture, a vision based tele-operating system and 3-D position information are key elements. This study proposed Robotic Smart Farming, an agricultural version of Robotic Smart Work System, and validated a 3-D position information system with a low cost omni camera and a laser marker system in the lab environment in order to get a vision based tele-operating system and 3-D position information. Results: The tasks like harvesting of the fixed target and cultivation management were accomplished even if there was a short time delay (30 ms ~ 100 ms). Although automatic conveyor works requiring accurate timing and positioning yield high productivity, the tele-operation with user's intuition will be more efficient in unstructured environments which require target selection and judgment. Conclusions: This system increased work efficiency and stability by considering ancillary intelligence as well as user's experience and knowhow. In addition, senior and female workers will operate the system easily because it can reduce labor and minimized user fatigue.

• Journal of Advanced Navigation Technology
• /
• v.19 no.5
• /
• pp.403-410
• /
• 2015

ADS-B can provide high accurate position information and faster update rate than Radar system and it is a technique that can supplement or replace the Radar. Recently ADS-B has been applied to the actual aircraft operation because to increase air transportation traffic and required to high accurate surveillance. In this study, we surveyed analysis of position deviation distribution analysis and received actual ADS-B trajectory data for conformed precise surveillance on the near airport area using ADS-B message. For that, we received the precision instrument approach ADS-B trajectory data using instrument landing system, and can analyse about target deviation distribution on the final approach segment about precision instrument approach. The result of analysis is mean distance of target deviation -0.04 m and standard deviation 6.71 m on between ADS-B target and extended runway centerline. Also that is to conformed the ADS-B message trajectory available to provide relatively exact surveillance information.

• Journal of the Korean Society of Systems Engineering
• /
• v.2 no.2
• /
• pp.11-20
• /
• 2006

For systematic and effective achievement of Military R&D(Research and Development) processes and activities, information system which supports the concept of Systems Engineering is necessary. WISEMAN(Weapon System Information Integration for System Engineering and Management) is an information integration system, which can provide various kinds of interrelated application functions and assist the collaboration and concurrent engineering activities for weapon system R&D processes and activities. WISEMAN can manage the design information and configuration data of the target development products. It takes charge of the processes and histories about the product data, makes to share all the design information, and provides important application functions for R&D processes such as requirement management, product structure management, parts Management, documents and CAD drawing management, design change management, TDP(Technical Data Package) management etc., and in conjunction with these functions WISEMAN controls various effectivities of system configurations based on baselines and model information. WISEMAN has been used by ADD and Rotem Co. since developed.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.11
• /
• pp.9-18
• /
• 2020

Recently, studies of integrated management platform and performance-based maintenance decision-marking systems have proceeded to the efficient management of port facilities. The purpose of this study was to manage and operate port facilities based on performance and to provide long-term durability and budgetary execution. Thus, it is essential to secure basic data to be analyzed in an integrated platform and decision-marking system. This study derived the data linkage measures to secure port facility design and management information. The target of deriving the data linkage was the POMS (Port Facility Management System) currently in operation by the MOF (Ministry of Oceans and Fisheries). To derive data linkage, analyze the database of POMS and select the data required for the operation-integrated platform and decision-marking system. The final data linkage target was determined by compiling the requirements of the relevant experts and selecting the final target of three groups (port and facility information, management information, and user information). As a result, the API interface design was prepared for detailed linked data and data linkage framework between the linkage data of POMS. The provision of real-time data linkage between POMS and integrated platform is expected to improve the operational efficiency of the integrated platform.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.53 no.2
• /
• pp.209-217
• /
• 2020

The purpose of this study was to compare the model-predicted and experimentally measured target strength (TS) of golden cuttlefish Sepia esculenta cuttlebones. Ultrasonic signals used to estimate frequency-dependent TS and the speed of sound in cuttlebones were measured by pulse-echo and through-transmission techniques, using a chirp sonar system and an ultrasonic pulser/receiver system under controlled laboratory conditions. The model appeared to slightly underestimate the predicted TS values in the frequency range of 100-160 kHz. However, there was good agreement between the predicted and measured TS values in the frequency range of 160-200 kHz. The significant similarity between the model-predicted and experimentally measured TS values supports the use of the Kirchhoff-ray mode (KRM) model for acoustic scattering analysis of cuttlebones. Accordingly, we concluded that the KRM model can be used as a tool to evaluate the frequency-dependent variability of TS due to changes in golden cuttlefish swimming depth.