• 한국수자원학회논문집
• /
• 제54권6호
• /
• pp.381-393
• /
• 2021

국립재난안전연구원의 재난안전 신기술 공적개발원조(ODA) 사업의 일환으로 2019년 라오스 볼리캄싸이주 남싼강유역의 보리칸을 대상으로 홍수예경보시스템을 구축하였다. 미계측 중소하천유역인 대상 지역에 강우량와 유출량의 실시간 관측을 위한 관측소 및 경보국을 설치하였으며, 실시간 자료 관리와 홍수예경보 기능 등을 수행하는 소프트웨어도 개발되었다. 홍수경보 기준 설정 및 홍수예측을 위한 nomograph 개발을 위해 대상 지역의 30년 치 연도별 최대 일강우량자료와 하천측량성과를 바탕으로 수리·수문분석을 수행하였다. 본 논문은 시스템 구축 과정과 방법론을 소개하고, 시스템 설치 후 2020년 실시간 관측 수집된 자료들을 바탕으로 수행한 시스템의 적용성 검토 결과를 제시하였다.

• 한국터널지하공간학회 논문집
• /
• 제9권3호
• /
• pp.229-240
• /
• 2007

터널 및 지하공간 시공 중 일상계측에서의 계측관리 효율성 및 고급의 내공변위 분석을 위해 3차원 광파기, 선단앵커정착형 타겟부착장치, 절대변위 계측관리 프로그램으로 구성된 3차원 절대변위 계측시스템을 구축하였다. 본 연구를 통해 3차원 절대변위 계측에 필요한 광파기의 종류와 사양을 제시하였고, 기존 타겟부착장치의 문제점을 개선한 선단앵커정착형 타겟부착장치에 대한 성능시험을 수행하여 우수한 시준거리와 측정정밀도를 확인하였다. 또한 절대변위 계측관리 프로그램에 대한 현장성능시험을 수행하여 얻어진 경향선/영향선 등 다양한 분석방법을 활용하여 막장전방의 연약대 존재 예측이 가능하였고, TSP탐사결과와 비교하여 정확성을 확인하였다.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제18권3호
• /
• pp.201-207
• /
• 2018

Purpose: To develop the reliability growth planning for a subsystem of guided weapon system using PM2-Continuous model. Methods: The target MTBF of the subsystem is set by allocating the system target MTBF to the lower level, where ARINC method is applied. Other model parameters such as initial MTBF, management strategy ratio and average fix effectiveness factor are chosen from historical growth parameter estimates. Given the values of model parameters, the reliability growth planning curve using PM2-Continuous model is constructed and the sensitivity analyses are performed for the changes of model parameters. Results: We have developed the reliability growth plan for a subsystem of guided weapon system using PM2-Continuous model. It was found that the smaller the ratio of initial MTBF to target MTBF, the smaller the management strategy ratio, the smaller the average fix effectiveness factor, and the shorter the development test period, the higher reliability growth is required. Conclusion: The result of this study will be used as a basis for establishing the reliability growth plan, the test period setting and the budget appropriation for the similar system entering the system development stage in the future.

• 한국농공학회지
• /
• 제44권5호
• /
• pp.96-105
• /
• 2002

As an useful water purification system for non-point source pollution in rural watersheds, interests in constructed wetlands are growing at home and abroad. It is well known that constructed wetlands are easily installed, no special managemental needs, and more flexible at fluctuating influent loads. They have a capacity for purification against nutrient materials such as phosphorus and nitrogen causing eutrophication of lentic water bodies. The Constructed Wetland Design Model (CWDM), developed through this study is consisted mainly of Database System, Runoff-discharge Prediction Submodel, Water Quality Prediction Submodel, and Area Assessment Submodel. The Database System includes data of watershed, discharge, water quality, pollution source, and design factors for the constructed wetland. It supplies data when predicting water quality and calculating the required areas of constructed wetlands. For the assessment of design flow, the GWLF (Generalized Watershed Loading Function) is used, and for water quality prediction in streams estimating influent pollutant load, Water Quality Prediction Submodel, that is a submodel of DSS-WQMRA model developed by previous works is amended. The calculation of the required areas of constructed wetlands is achieved using effluent target concentrations and area calculation equations that developed from the monitoring results in the United States. The CWDM is applied to Bokha watershed to appraise its application by assessing design flow and predicting water quality. Its application is performed through two calculations: one is to achieve each target effluent concentrations of BOD, SS, T-N and T-P, the other is to achieve overall target effluent concentrations. To prove the validity of the model, a comparison of unit removal rates between the calculated one from this study and the monitoring result from existing wetlands in Korea, Japan and United States was made. As a result, the CWDM could be very useful design tool for the constructed wetland in rural watersheds and for the non-point source pollution management.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제15권4호
• /
• pp.282-288
• /
• 2015

Purpose : The purpose of this study is to compare the RAM (reliability, availability and maintainability) value in the acquisition phase with operational period for air weapon systems. The objective is to determine if the value of RAM is sufficient in the field, and look for any difference from the target value to some extent. Methods : For a case study, the ${\bigcirc}{\bigcirc}$ training aircraft is selected. Data from the two acquisition sources are utilized. One is the operational data in domestic aircraft through research and development, and the other is the data from imported aircraft. The two different sources were collected independently and distinctly. Results : According to the analysis, the domestic aircraft shows high deviation in RAM value compare to the imported systems. This is due to the effort of continuous reliability improvement. In the aspect of maintainability, the result shows a slight deviation, and the availability meets the requirement. Conclusion : The results of this study can be used in finding a way that can be effectively applied to the sustainability in the weapon system. If the RAM performance is significantly lower than the target value, then it is necessary to improve the design activities so that they can achieve the RAM target value.

• 국제학술발표논문집
• /
• The 9th International Conference on Construction Engineering and Project Management
• /
• pp.776-783
• /
• 2022

Since Mechanical, Electrical, and Plumbing(MEP) routing is a repetitive and experience-centered process that requires considerable time and human resources, if automated, design errors can be prevented and the previously required time and human resources can be reduced. Although research on automatic routing has been conducted in many industries, the MEP routing in AEC projects has yet to be identified due to the complexity of system configuration, distributed expertise, and various constraints. Therefore, the purpose of this study is to identify the target subjects for MEP routing automation and the constraints of each subject. The MEP design checklist provided by a CM company and existing literature review were conducted, and target subjects and constraints were identified through process observation and in-depth expert interviews for five days by visiting a MEP design company. The target subjects were largely divided into six categories: air conditioning plumbing, air conditioning duct, restroom sanitary plumbing, heating plumbing, and diagram. The findings from interviews show that work reduction and error reduction has the greatest effect on air conditioning plumbing while the level of difficulty is the highest in air conditioning duct and restroom sanitary plumbing. Major constraints for each subject include preventing cold drafts on air conditioning pipes, deviation in ventilation volume in air conditioning ducts, routing order on restroom sanitary plumbing, and separation distance from the wall on heating plumbing. In this way, subjects and constraints identified in this study can be used for MEP automatic routing.

• 산업경영시스템학회지
• /
• 제36권4호
• /
• pp.109-115
• /
• 2013

Process Capability Index (PCI) is useful Statistical Process Control (SPC) tool that is measure of process diagnostic and assessment tools widely use in industrial field. It has advantage of easy to calculate and easy to use in the field. $C_p$ and $C_{pk}$ are traditional PCIs. These are only considers of process variation. These are not given information about the characteristic value does not match the target value of the process. Studies of this process capability index by many scholars actively for supplement of its disadvantage. These studies to evaluate the capability of situation of various field has presented a new process capability index. $C_{pm}$ is considers both the process variation and the process deviation from target value. And $C_{pm}{^+}$ is considers economic loss for the process deviation from target value. In this paper development of new process capability index that is Taguchi's quadratic loss function by applying the expected loss. And check the correlation between existing traditional process capability index ($C_{pk}$) and new one. Finally, we propose the criteria for classification about developed process capability index.

• 산업경영시스템학회지
• /
• 제46권2호
• /
• pp.109-115
• /
• 2023

This paper studied the problem of determining the optimal inventory level to meet the customer service target level in a situation where the customer demand for each branch of a nationwide retailer is uncertain. To this end, ISR (In-Stock Ratio) was defined as a key management indicator (KPI) that can be used from the perspective of a nationwide retailer such as Samsung, LG, or Apple that sells goods at branches nationwide. An optimization model was established to allow the retailer to minimize the total amount of inventory held at each branch while meeting the customer service target level defined as the average ISR. This paper proves that there is always an optimal solution in the model and expresses the optimal solution in a generalized form using the Karush-Kuhn-Tucker condition regardless of the shape of the probability distribution of customer demand. In addition, this paper studied the case where customer demand follows a specific probability distribution such as a normal distribution, and an expression representing the optimal inventory level for this case was derived.

• 한국통신학회논문지
• /
• 제35권5B호
• /
• pp.824-832
• /
• 2010

구조물의 관리에서 전문 관리 인력이 직접 조사하는 방식은 예산이나 검사 방법 및 주기에 따라 그 효과가 달라진다. 따라서 효과적이며 자동화된 구조물의 유지관리 방안이 필요하다. 교량 관리에서 자동화된 관리 방안으로는 몇몇 교량에 유선통신 방식을 이용한 상시 감시 시스템을 구축, 운영하고 있으나 교량 통합관리 시스템으로서의 성능은 초보적인 수준에 머물고 있다. 본 논문에서는 센서 네트워크를 적용한 교량의 통합관제 시스템을 구현한다. 교량에 설치된 센서를 무선망으로 구성하고 수집된 정보의 상시 모니터링을 위해 교량 관리자를 위한 기능과 관리시스템 관리용 기능, 그리고 비전문가용 웹 기반 모니터링 시스템을 구축하였다. 본 연구의 결과는 실험대상 교량에 적용하여 그 효과를 분석하고 있다.

• 한국물환경학회지
• /
• 제29권3호
• /
• pp.400-408
• /
• 2013

Total phosphorus was set as a target indicator to prevent eutrophication and algae growth, etc., in three major rivers (Nakdong River, Geum River and Yeongsang/Seomjin River) for the second phase (2011 ~ 2015) in total maximum daily loads (TMDLs) system. However, total phosphorus management was restrictively introduced, i.e., upstream of the Lake Daechung, in the Geum River watershed. Total phosphorus concentration and trophic levels in downstream of the Lake Daechung (include Mangyeong and Dongjin rivers) were increased more than upstream. Therefore, it is necessary to expand total phosphorus management in all watersheds of the Geum River. If total phosphorus was managed in all area of the Geum River watershed, it is possible to decrease total phosphorus concentration and trophic levels, and solve the unbalanced water quality between up and downstream of the Lake Daechung.