• Ecology and Resilient Infrastructure
• /
• v.9 no.1
• /
• pp.68-76
• /
• 2022

In this study, the Habitat Suitability Index (HSI) was calculated in the Miho stream of the Geum river system, and the environmental ecological flow by point was evaluated. Two points (St.3 and St.8) representing the up and downstream of Miho Stream were selected, in order to calculate the Habitat Suitability Index, the depth and velocity at point where each species is appeared were investigated. The Habitat Suitability Index (HSI) was calculated by the Washington Department of Fish and Wildlife (WDFW) method using the number collected by water depth and velocity section and the results of the flow rate survey. Two target species were selected in this study; dominant species and swimming species sensitive to flow. In the case of a single species of Zacco platypus, the water depth was 0.1 - 0.5 m and the velocity was 0.2 - 0.5 m/s. For species of swimming fish, the water depth was 0.2 - 0.5 m and the velocity was 0.2 - 0.5 m/s. The discharge-Weighted Useable Area (WUA) relationship curve and habitat suitability distribution were simulated at the Miho Stream points St.3 and St.8. At the upstream St.3 of Miho Stream, the optimal discharge was simulated as 4.0 m³/s for swimming fishes and 2.7 m³/s for Zacco platypus. At the downstream point of St.8, species of swimming fish were simulated as 8.8 m³/s and Zacco platypus was simulated as 7.6 m³/s. In both points, the optimal discharge of swimming fish was over estimated. This is a result that the Habitat Suitability Index for swimming fish requires a faster flow rate than the habitat conditions of the Zacco platypus. In the calculation of the minimum discharge, the discharge of Zacco platypus is smaller and is evaluated to provide more Weighted Useable Area. In the case of swimming fishes, narrow range of depth and velocity increases the required discharge and relatively decreases the Weighted Useable Area. Therefore, when calculating the Habitat Suitability Index for swimming fishes, it is more advantageous to calculate the index including the habitat of all fish species than to narrow the range.

• Journal of The Korean Association For Science Education
• /
• v.42 no.1
• /
• pp.77-96
• /
• 2022

This study investigated how collaborative reflection between novice secondary science teachers promoted the development of teaching professionalism. We intentionally selected research participants who shared sufficient rapport. Data were collected by videotaping the classes taught by participants, pre-talk, post-interviews and nine collaborative reflection processes. All data were transcribed and analyzed. Results indicated that all three teachers showed changes in teaching practice. Minyoung's practice involved a teacher-led lecture, but through collaborative reflection, she could create a learning environment to enhance students' power and ownership in her class. Emphasizing academic rigor, Soyoung used to teach content outside the scope of the curriculum, but through collaborative reflection, she became more considerate of students' understanding. Finally, in Jiyeon's classes inquiry activities and theoretical explanations were separated from each other. However, she repeated her efforts to improve her class after collaborative reflection, allowing students to construct explanations through activities. In this study, three factors that promoted the development of teachers' pedagogical content knowledge through collaborative reflection were identified. First, the different teaching orientations of the three teachers who participated in this study, promoted sharing of opinions through collaborative reflection. Second, reflection based on teaching practice enabled practical feedback on the class, which enhanced the development of teachers' pedagogical content knowledge. Third, the equal status and formation of rapport between the three teachers created an environment for productive reflection. These results suggest that future teacher education programs should target communities that can promote collaborative reflection based on teachers' teaching practice.

• Applied Chemistry for Engineering
• /
• v.33 no.2
• /
• pp.173-178
• /
• 2022

A lateral flow immunoassay (LFIA) method using carbon nanodot@silica as a signaling material was developed for analyzing the concentration of retinol-binding protein 4 (RBP4), one of the lung cancer biomarkers. Instead of antibodies mainly used as bioreceptors in nitrocellulose membranes in LFIA for protein detection, aptamers that are more economical, easy to store for a long time, and have strong affinities toward specific target proteins were used. A 5' terminal of biotin-modified aptamer specific to RBP4 was first reacted with neutravidin followed by spraying the mixture on the membrane in order to immobilize the aptamer in a porous membrane by the strong binding affinity between biotin and neutravidin. Carbon nanodot@silica nanoparticles with blue fluorescent signal covalently conjugated to the RBP4 antibody, and RBP4 were injected in a lateral flow manner on to the surface bound aptamer to form a sandwich complex. Surfactant concentrations, ionic strength, and additional blocking reagents were added to the running buffer solution to optimize the fluorescent signal off from the sandwich complex which was correlated to the concentration of RBP4. A 10 mM Tris (pH 7.4) running buffer containing 150 mM NaCl and 0.05% Tween-20 with 0.6 M ethanolamine as a blocking agent showed the optimum assay condition for carbon nanodot@silica-based LFIA. The results indicate that an aptamer, more economical and easier to store for a long time can be used as an alternative immobilizing probe for antibody in a LFIA device which can be used as a point-of-care diagnosis kit for lung cancer diseases.

• Journal of the Korean Society of Tobacco Science
• /
• v.24 no.1
• /
• pp.67-73
• /
• 2002

In light of addressing consumer health concern, coping with anti-tobacco movement, and promoting new product, tobacco industry is actively pursuing to make a new generation of cigarettes with low tar and nicotine deliveries, and less harmful substances. Low tar and low nicotine cigarettes increases their market shares dramatically world wide, especially in KT&G, multinational tobacco companies, EU countries, even in China regulated by CNTC to set up yearly target to lower tar and nicotine deliveries. On the other hand, to design a new cigarette with reduced harmful substances begins to gain speed. The "modified Hoffmann list" publishes thirty plus substances in tobacco leaf and main smoke stream, which is the prime suspect causing health problems. Various ways and means are developed to reduce such components including new tobacco breeds, new curing method, tobacco leaf treatment before processing, selected filtration system, innovated casing system to reduce free radicals, as well as some non conventional cigarette products. In TSRC held this year, the main topic is related to reduce tobacco specific nitrosamines in tobacco leaf. The new generation of cigarette is in the horizon. It still needs a lot help to produce commercial products with satisfied taste and aroma characters. The flavor industry is not regulated by many governments demanding which ingredients might or might not be for tobacco use. However, most of the cigarette companies self impose a list of ingredients to guide flavor suppliers to design flavors. Unfortunately, the number of ingredients in those lists is getting shorter every year. It is understandable that the health is not the only reason. Some cigarette companies are playing safe to protect the company from potential lawsuit, while others are just copying from their competitors. Moreover, it is obvious that it needs more assistance from casings and flavors to design new generation of cigarettes with missing certain flavor components in tobacco leaf and main smoke stream. These flavor components are either non-existed or at lower level at new form of cured tobacco leaf or filtered in the main smoke stream along with reduced harmful substances. The use of carbon filters and other selected filtration system poses another tough task for flavor system design. Specific flavor components are missing from the smoke analysis data, which brings a notion of "carbon taste" and "dryness" of mouth feel. It is ever more demanded by cigarette industry to flavor suppliers to produce flavors as body enhancer, tobacco notes, salivating agents, harshness reducer, and various of aromatic notes provided they are safe to use. Another trend is that water based flavor or flavor with reduced ethanol as solvent is gaining popularity. It is preferred by some cigarette companies that the flavor is compounded with all natural ingredients or all ingredients should he GMO free. The new generation of cigarettes demands many ways of new thinking process. It is also vital for tobacco industry. It reflects the real needs for the consumers that the cigarette product should be safe to use as well as bearing the taste and aroma characters smokers always enjoyed. An effective tobacco flavor system is definitely a part of the equation. The global trend of tobacco industry is like trends of any other industries lead by consumer needs, benefited with new technology availability, affected by the global economy, and subjected for various rules and regulations. Anti-tobacco organizations and media exceptionally scrutinize cigarette, as a legal commercial product. Cigarette is probably the most studied commercial product for its composition, structure, deliveries, effects, as well as its new developmental trend. Therefore, any new trend of cigarette development would be within these boundaries. This paper is trying to point out what it would be like for tobacco industry in the next few yews and what concerns the tobacco industry. It focuses mostly on the efforts to produce safer cigarettes. It is such a vital task for the tobacco industry and its affiliate industries such as cigarette papers, filters, flavors, and other materials. The facts and knowledge presented in this paper might be well known for the public. Some of the comments and predictions are very much personal opinion for a further discussion.

• Korean Journal of Ecology and Environment
• /
• v.55 no.3
• /
• pp.185-200
• /
• 2022

The risk of various hazardous substances in aquatic environment comprises not only the concentration of substances in the environmental medium but also their accumulation in fish through complex food web and the health risks to humans through the fish. In Korea, the monitoring of residual toxicant in aquatic ecosystems began in 2016 following the enforcement of the Acts on registration and evaluation for the management of chemicals used in daily life (consumer chemical products), and attention has been paid to potentially hazardous substances attributed to them. Recently, studies have been carried out to investigate the distribution of these hazardous substances in the ecosystem and calculate their emission factors. These include the accumulation and transport of substances, such as detergents, dyes, fragrances, cosmetics, and disinfectants, within trophic levels. This study summarizes the results of recently published research on the inflow and distribution of hazardous substances from consumer chemical products to the aquatic environment and presents the scientific implication. Based on studies on aquatic environment monitoring techniques, this study suggests research directions for monitoring the residual concentration and distribution of harmful chemical substances in aquatic ecosystems. In particular, this study introduces the directions for research on trophic position analysis using compound specific isotope analysis and trophic magnification factors, which are needed to fulfill the contemporary requirements of selecting target fish based on the survey of major fish that inhabit domestic waters and assessment of associated health risk. In addition, this study provides suggestions for future biota monitoring and chemical research in Korea.

• Korean Journal of Culture and Social Issue
• /
• v.21 no.3
• /
• pp.551-573
• /
• 2015

The rise of single living has been one of the most important demographic shifts of recent decades. The solo household is a little less than 40% in Europe areas and that of Tokyo is over 45%. Being impacted this figure, the formation of single economy is the key word in World Economic Forum(WEF) 2008. Seoul' single household is increasing rapidly. Between 2000 and 2005, the growth of single person is around 34%, the population of single person reached 700,000 people. Now 20% of total household in Seoul is Single household. Living alone or solo living is not exceptional or special in Seoul Metropolitan City. The rise in single living will create pressures towards poverty and inequality and so on. Seoul should develop and prepare the urban policy for single household. We figured out the four key trends which composed of single household in Seoul. Four types of single person are like below : Gold Mr and Miss, Reserved labor forces, depressed single and silver generation. Gold group is amonst people aged 30 and 40 who is working in the area of white collar and professional. They are usually elective single person household who have chosen solo living. Reserved labor forces group is usually among 20s people who have not get the regular hob. For this group, job acquiring is the most important issue. Depressed single person household group is among people aged late 30s and 40s. Its group is the result from the broken family. The silver group is among aged over 65 that is the main issue of the aged society. In this research, we stressed that people living alone can be split into two types - elective single person households who have chosen single living, and forced single person household who have been constrained to this lifestyle by circumstances. Except gold group, the rest of the group is the forced single household who are faced to poverty. The monthly income of single person household is almost under 2 million won. Single person household is usually working in the blue collar job and service area. So, except gold group that is the smallest part of single person household, almost single person is not the target of private market, but the object of public policy.

• Journal of Intelligence and Information Systems
• /
• v.29 no.3
• /
• pp.361-381
• /
• 2023

Research on corporate bankruptcy prediction has been focused on financial information. Since the company's financial information is updated quarterly, there is a problem that timeliness is insufficient in predicting the possibility of a company's business closure in real time. Evaluated companies that want to improve this need a method of judging the soundness of a company that uses information other than financial information to judge the soundness of a target company. To this end, as information technology has made it easier to collect non-financial information about companies, research has been conducted to apply additional variables and various methodologies other than financial information to predict corporate bankruptcy. It has become an important research task to determine whether it has an effect. In this study, we examined the impact of electronic payment-related information, which constitutes non-financial information, when predicting the closure of business operators using electronic payment service and examined the difference in closure prediction accuracy according to the combination of financial and non-financial information. Specifically, three research models consisting of a financial information model, a non-financial information model, and a combined model were designed, and the closure prediction accuracy was confirmed with six algorithms including the Multi Layer Perceptron (MLP) algorithm. The model combining financial and non-financial information showed the highest prediction accuracy, followed by the non-financial information model and the financial information model in order. As for the prediction accuracy of business closure by algorithm, XGBoost showed the highest prediction accuracy among the six algorithms. As a result of examining the relative importance of a total of 87 variables used to predict business closure, it was confirmed that more than 70% of the top 20 variables that had a significant impact on the prediction of business closure were non-financial information. Through this, it was confirmed that electronic payment-related information of non-financial information is an important variable in predicting business closure, and the possibility of using non-financial information as an alternative to financial information was also examined. Based on this study, the importance of collecting and utilizing non-financial information as information that can predict business closure is recognized, and a plan to utilize it for corporate decision-making is also proposed.

• Tunnel and Underground Space
• /
• v.33 no.4
• /
• pp.281-298
• /
• 2023

Continuous research efforts are being devoted to unmanned mobile platforms for lunar exploration. There is an ongoing demand for real-time information processing to accurately determine the positioning and mapping of areas of interest on the lunar surface. To apply deep learning processing and analysis techniques to practical rovers, research on software integration and optimization is imperative. In this study, a foundational investigation has been conducted on real-time analysis of virtual lunar base construction site images, aimed at automatically quantifying spatial information of key objects. This study involved transitioning from an existing region-based object recognition algorithm to a boundary box-based algorithm, thus enhancing object recognition accuracy and inference speed. To facilitate extensive data-based object matching training, the Batch Hard Triplet Mining technique was introduced, and research was conducted to optimize both training and inference processes. Furthermore, an improved software system for object recognition and identical object matching was integrated, accompanied by the development of visualization software for the automatic matching of identical objects within input images. Leveraging satellite simulative captured video data for training objects and moving object-captured video data for inference, training and inference for identical object matching were successfully executed. The outcomes of this research suggest the feasibility of implementing 3D spatial information based on continuous-capture video data of mobile platforms and utilizing it for positioning objects within regions of interest. As a result, these findings are expected to contribute to the integration of an automated on-site system for video-based construction monitoring and control of significant target objects within future lunar base construction sites.

• The Korean Society of Law and Medicine
• /
• v.24 no.2
• /
• pp.35-77
• /
• 2023

As the amendment to the Personal Information Protection Act, which newly established the basis for the right to request transmission of personal information, was promulgated through the plenary session of the National Assembly, MyData, which was previously applied only to the financial sector, could spread to all fields. The right to request transmission of personal information is the right of the information subject to be guaranteed for the realization of MyData. However, since the right to request transmission of personal information stipulated in the Personal Information Protection Act is designed to be applied to all fields, not a special field such as the medical field, it has many shortcomings to act as a core basis for implementing MyData in Medicine. Based on this awareness of the problem, this paper compares and analyzes major legal trends related to the right to portability of personal health information at home and abroad, and examines the limitations of Korea's Personal Information Protection Act and Medical Act in realizing Medical MyData. Under the Personal Information Protection Act, the right to request transmission of personal information is insufficient to apply to the medical field, such as the scope of information to be transmitted, the transmission method, and the scope of the person obligated to perform the transmission, etc.. Regulations on the right to access medical information and transmission of medical records under the Medical Act also have limitations in implementing the full function of Medical My Data in that the target information and the leading institution are very limited. In order to overcome these limitations, this paper prepared a separate and independent special law to regulate matters related to the use and protection of personal health information as a measure to improve the legal system that can effectively guarantee the right to portability of personal health information, taking into account the specificity of the medical field. It was proposed to specifically regulate the contents of the movement and transmission system of personal health information.

• Korean Journal of Environment and Ecology
• /
• v.37 no.4
• /
• pp.235-250
• /
• 2023

This study was carried out to identify the vascular flora of Mt. Bonghwa in the Baekdudaegan Mountain range, located on the border between Namwon City and Jangsu Country in Jeollabuk Province and Hamyang Country in Gyeongsangnam Province and use them as basic data for the conservation of plant diversity and prevention of the spread of alien plants. Specimens deposited at the Herbarium of Korea National Arboretum (KH) were reexamined, and 15 field surveys were conducted from April 2020 to July 2023. The result revealed a total of 466 taxa, consisting of 97 families, 279 genera, 409 species, 16 subspecies, 32 varieties and 9 forms, Of which, eight taxa were endemic plants, and one taxon, Aconitum coreanum (H.Lév.), belonged to the vulnerable (VU) on the national red list species. Moreover, there were 57 floristic target species, including 1 taxon of grade V, 9 taxa of grade III, 14 taxa of grade II, and 33 taxa of grade I, whereas there were 24 taxa of alien plants and 1 taxon of ecosystem disturbance species. In the usefulness survey, 353 taxa were for food, 3 for textiles, 71 for medicinal use, 21 for ornamental use, 108 for pasture use, 2 for industrial use, 7 for miscellaneous use, and 11 for timber plants.