• 대한기계학회논문집A
• /
• 제38권11호
• /
• pp.1239-1243
• /
• 2014

탄소섬유 강화플라스틱은 비강도, 비강성이 크고, 높은 감쇠 특성과 중량감소 측면에서 우수한 특성을 나타낸다. 그러나 탄소섬유 강화플라스틱은 재료의 적층각 또는 적층 순서에 따라 기계적 특성 차이가 크다. 또한 인장과 굽힘과 같은 하중을 받을 때 금속과 달리 파괴 예측이 어렵다. 본 연구에서는 최근 실생활에 밀접한 휴대용 스마트기기에 CFRP 적용을 위한 외부 충격에 정형화, 최적화 설계방식을 제시하고자 한다. CFRP 를 적층각도별 기계적 특성을 얻고자 인장실험을 하였고, 각 적층각도별 체결 특성을 얻고자 판에 탭 가공 후 토크 측정기를 이용하여 풀림 토크와 체결토크를 측정하였다. 위 두 실험에 비교 분석하여 최적의 조건을 찾고자 한다. 인장실험에서 적층각이 Woven 시편에서 강도와 강성 값이 가장 우수하였다. 또한 복합재료에서는 기지와 적층배열 때문에 풀림방지 코팅나사의 효과를 보기 힘들다. [$0_8/+45_2/-45_2/90_8$]s 에서 체결력이 가장 우수했으나, 인장응력이 상대적으로 낮았다. 핸드폰에 적용을 위해 인장 특성과 체결력을 모두 충족하는 최적의 시편은 Woven 이다.

• 고려인삼학회:학술대회논문집
• /
• 고려인삼학회 1984년도 학술대회지
• /
• pp.215-223
• /
• 1984

인삼이 노령자의 피로 및 쇠약 치료효과에 미치는 영향을 연구하기 위해 런던의 성프란시스병원과 지방의 일반 개업 병인으로부터 50명의 노인들을 모집하였다. 매일 2g의 홍삼 분말을 이중맹검법에 의하여 10일간 투약하였으며. 위약과 홍삼 분말의 투여는 3주간의 간격을 두고 각기 투여하였다. 간호원이 10가지 정신측정 종합테스트와 심리측정 테스트를 하였고, 기분상태 및 일반적인 건강평가를 설문지로 측정하였다 이 측정을 홍삼 및 위약의 투여기간을 전후하여 실시하였다. 즉, 각각의 테스트를 모두 4번 실시하였다. 심리측정 테스트와 정신측정 종합테스트 결과 홍삼의 투여는 위약과는 달리, 미약하나마 일관성있는 증가를 가져왔다. 그러나 기분상태 및 일반적인 건강 평가는 별 변화가 없었다. 결론적으로 인삼은 강장효과를 갖는다 할 수 있다. 노인병 치료를 평가함에 있어 시도방법 및 기간 등에 의하여 약효의 평가가 모호해지는 경우가 종종 있다. 보다 적절한 임상시험법에 대하여 토론하고자 한다.

• 한국주거학회논문집
• /
• 제24권2호
• /
• pp.97-104
• /
• 2013

This study involves 2 newly built apartment houses which are A with 23 floors as 150 mm slab width and B with 16 floors as 180 mm slab width. The impact was added by tapping and bang machine at the middle floor level of these 2 apartments and the test was arranged in terms of the characteristic of vibration and sound level which transferred to upper or down floors. As a result, impact floor shows the highest value in terms of both sound and vibration level and followed was at down floor of the Impact floor. Also, blocking function for the lightweight and heavyweight floor impact sound level was tested for each room of the apartment A and B including living room, main room, room 1 and 2. As a result, sound blocking function of B apartment was better than that of A and the function was getting worse when the room size is getting smaller.

• 한국멀티미디어학회논문지
• /
• 제21권6호
• /
• pp.649-658
• /
• 2018

In this paper, we propose a mechanical contact inner tap inspection system that can inspect the defect of the inner tap immediately after inner tap is processed within the machining center. The inspection module has the collet chuck structure, so it can mounted on the main spindle of the machining center during inspection. It was developed with a focus on inspection for tap having 20 mm depth which is primarily fabricated in automotive parts and has a double sided PCB-type control system including sensing function based on Zigbee module, micom and IR sensor for wireless transmission of measured data with low power operation, and also a battery for supplying electric power. The current consumption is 46.8mA in the inspection operation mode and 0.0268mA in the power saving mode for 3.7V of the applied power source, so that 30,000 times or more inspection can be performed with assumed 5 seconds inspection time for one tap. Experiments in test jig system and actual machining center confirm that the proposed inner tap inspection system can be applied to the batch process of simultaneous inspection after tapping in the machining center.

• 한국소음진동공학회논문집
• /
• 제24권7호
• /
• pp.501-508
• /
• 2014

Floor finishing materials such as floor coverings and floor mats can reduce floor impact noise easily. When an impact was applied to the floor, its finishing material is deformed and the impact force that was applied to the concrete slab is changed. The softer finishing materials were, the more impact force decreased. An experimental study was performed using 14 PVC floor coverings and 16 floor mats to capture the characteristics of impact force and impact noise in the residential buildings. The test results show that the impact force spectrum and the floor impact noise spectrum have a linear relationship in the case of a bare concrete slab, and the characteristics of impact force reduction are the same as those of floor impact noise reduction.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 추계학술대회논문집
• /
• pp.461-464
• /
• 2004

The reduction effect of floor impact noise depends on the various factors such as stiffness and thickness of the concrete slab, finishing If ceiling materials and the composition method. Among the rest it is well known that floating floor system is more effective. Standard floating floor(SFF) type-2 consisted of 50mm lightweight aerated concrete(LAC) and 20mm damping material has been widely used. But LAC construction problem on dry damping material occurred and the reduction effect of floor impact noise has bare minimum qualifications. Thus the aim of this study is to develop 40mm composite damping material(Soundzero Plus) for SFF type-5 which substitute LAC and damping material. 'Soundzero Plus' is satisfied with quality requirement for damping material for SFF. The heat transition rate, $0.45W/m^2{\cdot}K$ is more effective 55% about than the regulation. The test results of floor impact noise by using 'Soundzero Plus' are showed good improvement about 12dB (tested by tapping machine) and 4dB (tested by bang machine) between before and after.

• Interaction and multiscale mechanics
• /
• 제3권2호
• /
• pp.173-191
• /
• 2010

Damage detection plays a very important role to the maintenance of bridge structures. Traditional damage detection methods are usually based on structural dynamic properties, which are acquired from pre-installed sensors on the bridge. This is not only time-consuming and costly, but also suffers from poor sensitivity to damage if only natural frequencies and mode shapes are concerned in a noisy environment. Recently, the idea of using the dynamic responses of a passing vehicle shows a convenient and economical way for damage detection of bridge structures. Inspired by this new idea and the well-established tap test in the field of non-destructive testing, this paper proposes a new method for obtaining the damage information through the acceleration of a passing vehicle enhanced by a tapping device. Since no finger-print is required of the intact structure, this method can be easily implemented in practice. The logistics of this method is illustrated by a vehicle-bridge interaction model, along with the sensitivity analysis presented in detail. The validity of the method is proved by some numerical examples, and remarks are given concerning the potential implementation of the method as well as the directions for future research.

• 한국재료학회지
• /
• 제34권4호
• /
• pp.215-222
• /
• 2024

Because collagen is inherently piezoelectric, research is being actively conducted to utilize it to harvest energy. In this study, a collagen solution was prepared using edible low-molecular-weight peptide collagen powder, and collagen films were fabricated using a dip coating method. The collagen films prepared by dip coating showed a smooth surface without defects such as pinholes or cracks. Dehydrothermal treatment of the collagen films was performed to induce a stable molecular structure through cross-linking. The collagen film subjected to dehydrothermal treatment at 110 ℃ for 24 h showed a thickness reduction rate of 19 %. Analysis of the collagen films showed that the crystallinity of the collagen film improved by about 7.9 % after dehydrothermal treatment. A collagen film-based piezoelectric nanogenerator showed output characteristics of approximately 13.7 V and 1.4 ㎂ in a pressure test of 120 N. The generator showed a maximum power density of about 2.91 mW/m² and an output voltage of about 8~19 V during various human body movements such as finger tapping. The collagen film-based piezoelectric generator showed improved output performance with improved crystallinity and piezoelectricity after dehydrothermal treatment.

• 한국의류학회지
• /
• 제32권3호
• /
• pp.395-407
• /
• 2008

As global interest in clothing spreads over the smart clothing which arouses high added-value in the apparel industry, this study is to develop a smart jacket with an electrically-vibrating device maintaining excellent appearance and comfort. The vibrating device has a massage function that could relieve muscle pain near shoulders and neck. The purposes of this research are to develop jacket pattern for men in their thirties considering body shapes and fashion trend, to develop a wearable device that is composed of motor and controller and integrate it into a jacket, and to assess the external appearance and functional satisfaction of the smart jacket through the wearing test. The results are as follows: 1. In order to develope an appropriate jacket pattern for men in their thirties, several patterns were assessed for their fitting comfort. The final pattern was completed after making alterations some parts, and showed high satisfaction as 3.6(on a five-point scale) in all categories. 2. A vibrating device was developed by connecting motor, controller, battery and switch. Developing this device, focus was maximizing the strength of motor and minimizing the heat generated from motor and controller. Snaps were placed between inner and outer cloth of jacket so that the vibrating device could be easily attachable and detachable. The motor was located around Trapezius where muscles often get stiff. A switch was designed to be used in selecting the modes of Strong, Weak, and Cross Tapping. 3. The wearing test was conducted to examine outer appearance, comfort for motion, and functionality of the smart jacket. The results of assessing outer appearance showed that the location for attaching the vibrating device was not noticeable but looked natural, and there is almost no change in outer appearance when the vibrating device operates. The result of assessing comfort of action revealed that wearer's satisfaction was high in all categories about activity, wearer's comfort, etc. The result also showed that wear's satisfaction for effects of vibrating massage, easiness in using the device, heat generation was not less than 3.5 in all categories except a category about noise.

• 정신신체의학
• /
• 제5권1호
• /
• pp.89-96
• /
• 1997

SLE 환자들에서 인지기능의 장애가 있는지를 알아보기 위해서 신경정신과적 병력이 없는 내과 외래 SLE 환자 20명과 정상 대조군 20명을 대상으로 전산화 신경인지기능 검사인 Vienna test system을 시행하고 이를 인지기능에 영향을 미칠 수 있는 임상 변인들과의 연관성을 분석하여 다음과 같은 결과를 얻었다. 1) SLE 환자군과 정상 대조군의 신경인지기능 검사의 각 항목 비교 인식력 검사항목에서 SLE 환자군은 정상 대조군에 비해 정확하게 응답한 반응수가 적었으며 '예'와 '아니오' 중 '아니오'를 정확하게 반응한 수도 적었다. 또한 '예'와 '아니오'에 대해 각각 정확한 반응을 하는 평균 반응시간이 길었으며 검사소요 시간도 길었다. 주의력 검사항목에서는 SLE 환자군이 정상 대조군에 비해 정확하게 응답한 반응수가 적었고, 평균 반응시간이 길었다. 그러나, corsi단기 기억력 검사항목에서는 시각적 단기 기억력 범위와 정확하게 맞춘 총 응답수에서 두군 간에 유의한 차이가 없었다. 표준도형 지능검사항목에서 SLE 환자군은 정상 대조군에 비해 정확하게 응답한 반응수가 적었다. 신경행동학적 인지상태 검사중 기억력 항목에서 SLE 환자군은 정상 대조군에 비해 유의하게 낮은 점수를 보였다. 2) 신경인지기능의 각 항목과 환자군의 연령, 교육연한, SLE 질환 활성도(SLE Disease Activity Index), 우울 증상의 정도, 항 ds-DNA항체. 보체 C3/C4, 스테로이드의 용량 등의 임상 변인들과의 상관관계를 비교하였을 때 통계적으로 유의하지 않았다. 이상의 결과에서 질환 활성도가 낮은 SLE환자들은 과거 신경정신과적 증상의 병력이 없고 병의 이환 기간이 비교적 짧음에도 불구하고 인지기능의 장애를 나타내었다. 그리고 이는 기타 장기의 침범으로 인한 비특이적 영향이 아닌 중추신경계의 침범에 의한 것으로 보이며 우울정도나 스테로이드 용량에 영향을 받지 않는 것으로 생각된다.