• 비파괴검사학회지
• /
• 제29권4호
• /
• pp.331-337
• /
• 2009

우주 발사체는 매우 높은 신뢰도의 경량구조가 필요하다. 비 파괴검사 방법 등을 이용한 구조 건전성 관리가 중요하다. 본 논문에서는 우주발사체의 제작 및 검사에 실제 사용되었던 비 파괴검사 사례 중 일부를 정리하였다. 검사 방법으로는 초음파, X-ray, tapping, 음향방출 등이 사용되었고, 하드웨어로는 페이로드 페어링, 고압탱크, 체결부 및 접합부 등을 대상으로 하였다. 페이로드 페어링에서는 샌드위치 미접착 검사의 정량적 기준을 제시하였고, 고압탱크는 내압 인증시험시 내압증가에 따른 음향방출 데이터를 정리하였다. 샌드위치 체결부에서는 음향방출 신호의 주파수 변화에 따른 파손모드를 분석하였고, 이종재료 접합 구조에서는 미접착부 초음파검사를 위한 표준시편을 제시하였다. 이러한 분석 및 기록은 발사체 시스템을 구성하여 어떠한 상황이 발생하여도 신속하게 판단할 수 있는 근거가 될 수 있으며 발사체 시스템의 신뢰도를 높여주는 역할을 한다.

• 한국고분자학회:학술대회논문집
• /
• 한국고분자학회 2006년도 IUPAC International Symposium on Advanced Polymers for Emerging Technologies
• /
• pp.346-346
• /
• 2006

Several types of dynamic atomic force microscopy such as tapping-mode, force modulation-mode are commonly cooperated by phase-contrast imaging techniques, which were interpreted as elastic contrast by mistake in the past and are nowadays regarded as the representation of energy dissipative processes. However, as theoretically reported, the situation is not so simple when the strong adhesive interaction is involved. Furthermore, elastic and viscous contributions are not easily divided in the case of polymeric systems. Thus, the interpretation of image contrast for them must be very carefully treated. In this study, we will demonstrate how such contrast mechanisms are complicated, using several miscible and immiscible polymer blend systems as model samples.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 추계학술대회논문집
• /
• pp.756-759
• /
• 2005

Dynamic force microscopy utilizes the dynamic response of a resonating probe tip as it approaches and retracts from a sample to measure the topography and material properties of a nanostructure. We present recent ideas based on proper orthogonal decomposition (POD) and detailed experiments that yield new perspectives and insight into AFM. A dynamic cantilever model with Lennrad-Jones interaction Potential which includes attractive and repulsive van der Waals demonstrates the resonable tapping mode response in time and frequency.

• 방사성폐기물학회지
• /
• 제14권2호
• /
• pp.169-178
• /
• 2016

플라즈마토치 용융로에 있어서 내화물의 보수를 최소화하고 용융물의 배출을 원활하게 하기 위해서는 처리대상 폐기물의 물성을 충분히 고려하여야 한다. 원전에서 발생되는 비가연성 방사성폐기물 중 많은 비중을 차지하고 있는 콘크리트 조각, 유리, 모래 등에 대한 화학적 조성비를 조사하여 보면 산성산화물이 염기성산화물에 비해 압도적으로 많은 비중을 차지하고 있으므로 용융 시 염기도가 매우 낮은 산성 슬래그가 된다. 이 용융슬래그는 유동도가 낮아서 용융물의 배출특성이 좋지 않으며 내화물에 침식을 유발시키는 주된 요인이 된다. 경사형 구조의 측면 출탕구를 가진 플라즈마토치 용융로의 경우, 구조상 출탕 후 일정량의 금속성 용융물이 항상 용융로 내부 바닥과 출탕구에 남게 된다. 비중차에 의해 비금속 용융슬래그는 금속성 용융물 상부에 위치하게 되며 혼합형 플라즈마토치를 이행형 운전모드로 가동하게 되면 금속성 용융물과 비금속 용융물이 동시에 용융되므로 비금속 용융슬래그의 온도는 금속 용융온도 이상으로 유지가 된다. 내화물의 수명 향상을 위해 용융로 내부의 온도와 용융물과 접촉하는 부위와 접촉되지 않는 부위를 구별하여 내화물의 특성을 주지하고 가장 적합한 내화물을 부위별로 선정하였다. 산성 내화물과 염기성 내화물이 인접하지 않도록 하고 용융슬래그에 대한 저항성을 높이도록 하였다.

• 한국멀티미디어학회논문지
• /
• 제21권6호
• /
• pp.649-658
• /
• 2018

In this paper, we propose a mechanical contact inner tap inspection system that can inspect the defect of the inner tap immediately after inner tap is processed within the machining center. The inspection module has the collet chuck structure, so it can mounted on the main spindle of the machining center during inspection. It was developed with a focus on inspection for tap having 20 mm depth which is primarily fabricated in automotive parts and has a double sided PCB-type control system including sensing function based on Zigbee module, micom and IR sensor for wireless transmission of measured data with low power operation, and also a battery for supplying electric power. The current consumption is 46.8mA in the inspection operation mode and 0.0268mA in the power saving mode for 3.7V of the applied power source, so that 30,000 times or more inspection can be performed with assumed 5 seconds inspection time for one tap. Experiments in test jig system and actual machining center confirm that the proposed inner tap inspection system can be applied to the batch process of simultaneous inspection after tapping in the machining center.

• Journal of Electrical Engineering and Technology
• /
• 제1권2호
• /
• pp.246-250
• /
• 2006

Highly ordered gold nanodot arrays have been successfully obtained by vacuum evaporation using an anodic aluminum oxide (AAO) as a shadow mask. An AAO mask with the thickness of 300 um was prepared through an anodization process. The structure of the nanodot arrays was studied by a field- emission scanning electron microscope (FE-SEM) equipped with an energy dispersive spectrometer (EDS). A tapping mode atomic force microscope (AFM) was employed for studies of height and phase feature. The nanodot arrays were precisely reproduced corresponding to the hexagonal structure of the AAO mask in a large area. In the gold nanodot arrays, the average diameter of dots is approximately the same as the AAO pore size in the range from 70 um to 80 nm and 100 nm center-to-center spacing. EDS analysis indicated that the gold dots were almost entirely consisted of gold, a highly demanded material.

• 대한인간공학회지
• /
• 제6권1호
• /
• pp.3-8
• /
• 1987

This paper develops a statistical mode which estimates mental and physical loads of light work from sinus arrhythmia (SA) scores. During experiments, various levels of mental and physical loads (respectively scored by information processing and finger tapping rates) were imposed on subjects and SA scores were measured from the subjects. Two methods were used in developing workload estimation model. One is an algebraic inverse function of a multivariate regression equation, where mental and physical loads are independent variables and SA scores are dependent variables. The other is a statistical multivariate inverse regression. Of the two methods, inverse function resulted in larger mean squqre error in predicting mental and physical loads. Hence, inverse regression model is recommended for precise workload estimation.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.1772-1775
• /
• 2003

The stiffness of multi-articulated industrial robots is very weak, because their structure is an articulated type with some links and joints. Thus it is known that cutting processes for metals are not accepted in machine shop well, but they have a lot of merits for cutting processes, for example. drilling, tapping. and engraving etc., because of the characteristics of their high degree of freedom. The temptation of cutting aluminium was carried out to investigate the feasibility and the limitations or constrains for cutting metals on them. First the mode shapes of 6-axes FANUC welding robot were taken and analysed, and next the cutting processes were practically carried out on it. The results of study were found out to show the feasibility of cutting processes at end-milling under 6mm of tool diameter. as well as to have some limitations and constrains, for examples, surface roughness and feed rate, depth of cut, cutting force etc..

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.1773-1777
• /
• 2008

The proper orthogonal decomposition(POD) is used to the modal analysis of microcantilever of dynamic mode atomic force microscopy(AFM). The proper orthogonal modes(POM) are extracted from vibrating signals of microcantilever when it resonates and taps the sample. We present recent ideas based on POD and detailed experiments that yield new perspectives into the microscale structures. The linearized modeling technique based on POD is very useful to show the principal characteristics of the complex dynamic responses.

• 한국정밀공학회지
• /
• 제24권6호
• /
• pp.96-104
• /
• 2007

Calibration of the spring constants of atomic force microscopy (AFM) cantilevers is one of the issues in biomechanics and nanomechanies for quantified force metrology at pieo- or nano Newton level. In this paper, we present an AFM cantilever calibration system: the Nano Force Calibrator (NFC), which consists of a precision balance and a one-dimensional stage. Three types of AFM cantilevers (contact and tapping mode) with different shapes (beam and V) and spring constants (42, 1, 0.06 N $m^{-1}$) are investigated using the NFC. The calibration results show that the NFC can calibrate the micro cantilevers ranging from 0.01 ${\sim}$ 100 N $m^{-1}$ with relative uncertainties of less than 2%.