• Asian-Australasian Journal of Animal Sciences
• /
• v.28 no.4
• /
• pp.457-466
• /
• 2015

Taoyuan pig is a native Taiwan breed. According to the historical record, the breed was first introduced to Taiwan from Guangdong province, Southern China, around 1877. The breed played an important role in Taiwan's early swine industry. It was classified as an indigenous breed in 1986. After 1987, a conserved population of Taoyuan pig was collected and reared in isolation. In this study, mitochondrial DNA sequences and 18 microsatellite markers were used to investigate maternal lineage and genetic diversity within the Taoyuan pig population. Population differentiation among Taoyuan, Asian type, and European type pig breeds was also evaluated using differentiation indices. Only one D-loop haplotype of the Taoyuan pig was found. It clustered with Lower Changjiang River Basin and Central China Type pig breeds. Based on the polymorphism of microsatellite markers, a positive fixation index value ($F_{IS}$) indicates that the conserved Taoyuan population suffers from inbreeding. In addition, high $F_{ST}$ values (>0.2105) were obtained, revealing high differentiation among these breeds. Non-metric multi-dimensional scaling showed a clear geometric structure among 7 breeds. Together these results indicate that maternally Taoyuan pig originated in the Lower Changjiang River Basin and Central China; however, since being introduced to Taiwan differentiation has occurred. In addition, Taoyuan pig has lost genetic diversity in both its mitochondrial and nuclear genomes.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2004.08a
• /
• pp.1053-1056
• /
• 2004

Chunghwa Picture Tubes, LTD. (CPT) has developed a Novel TFT-LCD Driving Techniquel. This new technique is developed in combination with other state-of-the-art image processing solutions such as image compression / decompression, motion detection, and noise reduction. By applying the Novel Driving Technique to the high resolution TFT-LCD, it was found that the response time can be effectively reduced with a lower overall system cost by smaller frame memory requirement, lower EMI by less memory band-width. Likewise, higher display quality can also be achieved in that the unexpected noises generated by over-drive can be eliminated. The Novel TFT-LCD Driving Technique has been successfully implemented to the 30 inch WXGA (1280${\times}$768) resolution TFT LCD commercial TV module. It was found that the quality of moving picture was better improved compared with that of the conventional fast response driving method.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.17
• /
• pp.7487-7488
• /
• 2014

• Mycobiology
• /
• v.48 no.3
• /
• pp.219-227
• /
• 2020

Androgen-independent prostate cancer accounts for mortality in the world. In this study, various extracts of a medical fungus dubbed Ganoderma formosanum were screened for inhibition of DU145 cells, an androgen-independent prostate cancer cell line. Results demonstrated that both hexane (GF-EH) and butanol (GF-EB) fraction of G. formosanum ethanol extract inhibited DU145 cell viability in a dose-dependent manner. GF-EH induced cell-cycle arrest in G1 phase of DU145 cells via downregulation of cyclin E2 protein expression. In addition, GF-EB triggered extrinsic apoptosis of DU145 cells by activating caspase 3 gene expression resulting in programed cell death. Above all, both GF-EH and GF-EB show lower toxicity to normal human fibroblast cell line compared to DU145 cell, implying that they possess specific drug action on cancer cells. This study provides a molecular basis of G. formosanum extract as a potential ingredient for treatment of androgen-independent prostate cancer.

• Industrial Engineering and Management Systems
• /
• v.10 no.2
• /
• pp.115-122
• /
• 2011

This research considers a system containing a manufacturing firm who generates waste material during manufacturing process, and a disposal firm who collects and disposes the waste material. Identification of the optimal number of pick ups and the amount of waste to be disposed at certain period of time in terms of cost minimization is studied. Two types of waste accumulation rates, constant and linearly increasing, are discussed and mathematical models are developed. It can be shown that the results for these two different types of waste accumulation differ in a wide range because of the difference in the way of how waste is accumulated, which disturbs the storage cost. An integrated model is also developed and discussed in which both the manufacturing firm and the disposal firm benefit from the coordination between the two parties. It is shown that the optimal policy adopted by the integrated approach can provide a strong and consistent cost-minimizing effect for both the manufacturing firm and the disposal firm over the existing approach. Finally, all the models are verified by a numerical example and the results are compared.

• Computers and Concrete
• /
• v.13 no.1
• /
• pp.83-96
• /
• 2014

Accumulated annual reservoir sedimentation in Taiwan was 14.6 million m3 in 2010, seriously endangering reservoir safety and the water supply. In addition, the sintering temperature of reservoir-sediment aggregates (RSAs) is very high, and very energy consuming consequently. Therefore, to explore the effects of admixtures on sintering behavior and performance of the aggregates, two different admixtures are blended, waste-glass and municipal sewage sludge, into reservoir sediment to make artificial aggregates. Experimental results show that the lightweight characteristics of waste-glass/reservoir-sediment aggregates (WGRSAs) are more significant than those of sewage sludge/reservoir-sediment aggregates (SSRSAs). Moreover, as sintering temperature increases, the specific gravity of WGRSAs drops more apparently. The optimum sintering temperature of pure reservoir-sediment aggregates (PRSAs), SSRSAs, and WGRSAs was $1150^{\circ}C$, $1100^{\circ}C$, and $1050^{\circ}C$, respectively. The PRSAs are normal weight with better strength; the WGRSAs are lightweight and energy-saving; and the SSRSAs are lightweight with normal strength.

• Asian-Australasian Journal of Animal Sciences
• /
• v.14 no.4
• /
• pp.447-454
• /
• 2001

For determining the relative genetic effects of Duroc (D) and Taoyuan (T) breeds on the economic traits of their hybrids, 72 litters of pigs, from four mating types, namely TT (T♂$\times$T♀), DD (D♂$\times$D♀) and D-T hybrids (TD, T♂$\times$D♀ and DT, D♂$\times$T♀) were used in this study. The various crossbreeding parameters were estimated by comparisons among mating types using linear contrasts of least-square analysis. The results of reproductive traits analysis showed that T breed had contributed superior genetic effects on the total number of piglets at birth (TBN) (p<0.10) and number of live piglets at 21 days (LP21) (p<0.05) to the D-T hybrids. Estimates of maternal genetic effects showed that the T females were superior in TBN (p<0.05), but inferior in average birth weight (ABW) and average litter birth weight (LBW) (p<0.01) to the D females. Direct heterosis effects were significant for LBW, LP21 and LWT21 (p<0.01). Least-squares analysis of other economic traits showed that T breed had relative negative effects on all growth traits, withers height (WH), body type index (BTI), average backfat thickness (ABF), carcass length (LENG), loin eye area (longissimus) (LEARA), and lean percentage (LEAN) of D-T hybrids (p<0.05). Estimates of direct genetic effects showed that the D breed was superior to the T breed in all growth and carcass traits except the average backfat (BF). Estimates of maternal genetic effects showed that average body weight at 180 days (WT180) of progenies from T sows were lighter than from D sows. Progenies from D females had larger and leaner carcass than those from T females. Direct heterosis effects were significant for average daily weight gains from 150 to 180 days ($ADG_{150-180}$) (p<0.05) and for average body weights at 150 (WT150), and 180 days (WT180), average daily weight gains from birth to 150 and 180 days ($ADG_{150}$ and $ADG_{180}$, respectively), WH, body length (BL), ABF, BTI, and LENG (p<0.01). The results showed that D-T hybrids tended to have superior TBN and LP21 than D breed, and to be superior in all growth and most conformation and carcass traits to the T breed.

• Journal of Distribution Science
• /
• v.11 no.6
• /
• pp.21-30
• /
• 2013

Purpose - This paper examines product design management, the current design focus of which has shifted to the need to produce innovation applications that can effectively respond to the market's consumption changes in a timely manner. Research design, data, methodology - This study discusses several methodologies that are widely used in experimental processes, such as fuzzy theory, multi-criteria decision-making theory, and managing decision making. The designers will better understand their customers by applying these methodologies. This study examines how the current trend in product innovation design observes customer needs, controls innovation, and stimulates design ability. Results - This paper takes innovative telephone design as an experimental case to investigate how to create a product using market-oriented and customized management concepts and creative design abilities. Conclusions - If accompanied by an innovative product value chain, a product can further the development of enterprise management, now the main element of every developed country's social and economic development.

• Journal of Distribution Science
• /
• v.11 no.3
• /
• pp.13-22
• /
• 2013

Purpose - Product purpose for optimal values solution for synthesize evaluative criteria and optimize product design values. In addition, product designer has to consider the product design to conform to project, laws and regulations, authentication, from the product design stage. Research design, data, methodology - How to use an evaluative criteria model's imprecise market data by evaluative criteria research design; product mapping relationships between design parameters and customer requirements using product predicted value method. An evaluative criteria model and their associated criteria status, product evaluative criteria model of results. Results - Therefore, after the enterprise product design project analysis, effectiveness and the customer degree of satisfaction must be appraised to obtain the maximum value for the benefit on behalf of the implementation goals, the promotion product level and market competition strength. Conclusions - In multi criterion decision making (MCDM), using its searching software capacity to obtain the optimal solution.

• Asian Journal of Business Environment
• /
• v.4 no.3
• /
• pp.27-37
• /
• 2014

Purpose - In the past, designs for traditional products have usually focused on historic techniques. However, this tradition of using historic techniques has now been replaced by the trend of using the innovative design concept. Research design, data, and methodology - To measure future market trends and quality requirements, we apply the results of the questionnaires and analyze them with various experimental processes and a design methodology. In this way, we gauge the impact of the innovative product value chain on the promotion of new products. Results - Accompanied with an innovative product value chain, the product can stimulate the development of enterprise management, which has become the main issue in social and economic development in every developed country, and can facilitate the progress of enterprise management throughout the enterprise. Conclusions - Customer demand should be emphasized as the primary means to solve design problems, to design optimal solutions, to create differentiation with competitors, and to pursue optimal marketing strategies.