• Journal of Construction Engineering and Project Management
• /
• v.4 no.1
• /
• pp.15-28
• /
• 2014

Completing road construction projects within the budget and time has been a problem for the Tanzania National Roads Agency (TANROADS); and the major problem highlighted in almost all projects being inadequate design. However, the extent to which inadequate design contributes to both time and cost overruns and its causes remained under-studied. The objective of this study is therefore to determine the extent of the effect of inadequate design, its causes and remedial measures. The methodology used in this study includes reviewing recent projects completion reports, holding roundtable discussions with consultants and TANROADS officials and analyzing the information. Cost and time overruns for the reviewed projects averaged 44% and 26% respectively. Similarly, the extents to which inadequate design contributes to cost and time overruns were on average found to be 61% and 85% respectively. The overruns are predominantly related to problems that occurred during the design process. To alleviate the problem, TANROADS is advised to improve the management of design projects, enhance the process of reviewing design reports, improve the design process including introducing Road Safety Audit and geometric design manuals, and increase staff to match the work-load.

• KOMUNHWA
• /
• no.63
• /
• pp.5-42
• /
• 2004

Several new results were come from the third excavation of the Isimila site in Tanzania which is well known for typical Acheulean industry from the late Middle Pleistocene deposits. The research was carried out in 2003 by the Institute of Cultural Propert

• Journal of Construction Engineering and Project Management
• /
• v.8 no.2
• /
• pp.17-33
• /
• 2018

This study investigates the stability of professionals' cost variability factor-rankings across different levels of cost-variability and response scenarios. Descriptive statistics are used to examine the stability of factor-ranking for 20 cost variability factors and a Multinomial Logistic (MNL) regression model was implemented to examine the stability of cost variability factors across three cost variability levels. The finding on the descriptive statistics indicated that professionals' factors-rankings are stable only for external factors. The MNL regression results on factor-stability suggested that 8 out of the 20 evaluated factors were unstable determinant of lower cost variability levels. These factors are "risk associated with the project", "personal bias and poor professionalism of the estimators", "limited time available to complete the project", "lack of skills and experience by estimator" "geographical location of projects", "incomplete & rush designs for estimate", "unforeseen or unexpected site constraints", "high class bidders for the contractors". Similarly lack of experience and large size projects were observed to be unstable as well. These observations suggest that professionals' view on pre-tender cost variability factor-ranking yields unstable factor rankings hence should not be relied upon as the only mechanisms to mitigate cost related risks in construction projects.

• Journal of Forest and Environmental Science
• /
• v.36 no.3
• /
• pp.233-242
• /
• 2020

The Lake (Victoria) zone of Tanzania, which has the least forest resources in the country, is a potential economic growth zone in the country. Therefore, this study analyses the impact of implemented forest policies on the status of forest resources in the area, given the unique features. The study identifies the status of forested lands in the area, and then fits binary logistic regression to identify the impact of policies related elements (i.e. type of forest, type of management) on the status; forest area and location (region) are used as control variables. Results show that 63% of the forested land in the area is destructed; main activities being agriculture, residential, firewood, and charcoal burning activities. Logistic results showed natural forests, forests located in Geita region, forests managed by municipal councils are more likely to be destructed; while plantation forests, forests located in Kagera region, privately managed forests are less likely to be destructed. Thus, the study concludes that policies and measures are not enough for the preservation of forest resources in the area; some of the economic activities in the area are occurring at the expenses of the forests; hence recommend more sustainable development plans and incorporating different crossing cutting sectors in the policies.

• Journal of Appropriate Technology
• /
• v.6 no.2
• /
• pp.126-135
• /
• 2020

Recently, with the development of the 4th Industrial Revolution era and the popularization of technologies the maker movement is spreading worldwide in various ways for education, entrepreneurship, and solving social problems. This paper introduces a case of establishing and operating a maker space in Tanzania, East Africa, one of the developing countries. iTEC Tech-shop was established in the first half of 2018 at the Nelson Mandela African Institution of Science and Technology (NM-AIST) in Arusha, Tanzania by Innovative Technology and Energy Center (iTEC), and has been operating for nearly two years. With the allocation of empty warehouse space from NM-AIST, physical facilities were established through the purchase and installation of equipment and hand tools. Based on the advice from Idea Factory of Seoul National University and Fab-Lab Seoul, iTEC Tech-shop operational system were established. Through a total of 7 technical workshops, iTEC Tech-shop provided training courses for about 180 local personnel. In addition, the smart Techshop test-bed project was promoted in order to improve the operation level along with securing sustainability of the Techshop. The case of the iTEC Tech-shop could be a useful case for institutions or organizations promoting the maker movement to developing countries.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.11 no.4
• /
• pp.293-301
• /
• 2013

Borehole Disposal Concept (BDC) was initiated by the South African Nuclear Energy Corporation (NECSA) with the view to improve the radioactive waste management practices in Africa. At a time when geological disposal of radioactive waste is being considered, the need to protect ground water from possible radioactive contamination and the investigation of radionuclides migration through soil and rocks of zone of aeration into ground water has becomes very imperative. This is why the Borehole Disposal Concept (BDC) is being suggested to address the problem. The concept involves the conditioning and emplacement of disused sealed radioactive sources in an engineered facility of a relatively narrow diameter borehole (260 mm). Tanzania is operating a Radioactive Waste Management Facility where a number of spent sealed radioactive sources with long and short half lives are stored. The activity of spent sealed radioactive sources range from (1E-6 to 8.8E+3 Ci). However, the long term disposal solution is still a problem. This study therefore proposing the country to adopt the BDC, since the repository requires limited land area and has a low probability of human intrusion due to the small footprint of the borehole.

• Asian-Australasian Journal of Animal Sciences
• /
• v.15 no.5
• /
• pp.751-756
• /
• 2002

A study was carried out to evaluate the incidences and causes of bovine mastitis in Tanzanian shorthorn zebu (Bos indicus) in the traditional sector and crossbred cows (Bos taurus${\times}$Bos indicus) in the dairy ranching sector, both found under the extensive range management system. Management practices were evaluated through a survey study using structured questionnaires. A total of 120 lactating cows (60 cows from each sector) were screened for the disease using the California Mastitis Test (CMT). Confirmatory tests used for infected cows included; the Direct Microscopic Somatic Cell Count (DMSCC), culture, bacteriological and biochemical laboratory assays. Survey results showed that management practices were generally very poor in both sectors with 84% of the surveyed herds being kept and milked under very unhygienic environmental conditions. The level of infection was higher in the crossbred cows (5% clinical and 38.3% sub-clinical mastitis) and lower in the zebu cows with only sub-clinical mastitis (23.3%). Crossbred cows had (p<0.05) higher somatic cell counts than zebu cows. The four highest-ranking bacterial isolates in order of importance were Staphylococcus aureus, Escherichia coli, Streptococcus agalactiae and Bacillus spp. It was concluded that bovine mastitis under the extensive management system in Tanzania was a result of poor management practices and that zebu cows were more resistant to the diseases than crossbred cows.

• Korean Chemical Engineering Research
• /
• v.58 no.2
• /
• pp.293-300
• /
• 2020

Eucheuma spinosum, red macro-algae, contains carrageenan as the major polysaccharide and is commercially produced in Indonesia, Malaysia, Philippines, China and Tanzania. In this study, E. spinosum was converted to sugar and platform chemicals (5-HMF, levulinic acid, formic acid) via FeCl₃-catalytic hydrothermal reaction. In addition, statistical methodology (3-level 3-factor Box-Behnken design) was applied to optimize and evaluate the effects of reaction factors (reaction temperature, catalyst concentration and reaction time). As a result of optimization, the concentration of 5-HMF was obtained to be 2.96 g/L at 160 ℃, 0.4 M FeCl₃ and 10 min. Optimal conditions of levulinic and formic acids were determined at 200 ℃, 0.6 M FeCl₃ and 30 min, and the concentrations were obtained to be 4.26 g/L and 3.77 g/L, respectively.

• Parasites, Hosts and Diseases
• /
• v.59 no.2
• /
• pp.139-148
• /
• 2021

This study was carried out to provide information on the taxonomic classification and analysis of mitochondrial genomes of Spirometra theileri. One strobila of S. theileri was collected from the intestine of an African leopard (Panthera pardus) in the Maswa Game Reserve, Tanzania. The complete mtDNA sequence of S. theileri was 13,685 bp encoding 36 genes including 12 protein genes, 22 tRNAs and 2 rRNAs with absence of atp8. Divergences of 12 protein-coding genes were as follow: 14.9% between S. theileri and S. erinaceieuropaei, 14.7% between S. theileri and S. decipiens, and 14.5% between S. theileri with S. ranarum. Divergences of 12 proteins of S. theileri and S. erinaceieuropaei ranged from 2.3% in cox1 to 15.7% in nad5, while S. theileri varied from S. decipiens and S. ranarum by 1.3% in cox1 to 15.7% in nad3. Phylogenetic relationship of S. theileri with eucestodes inferred using the maximum likelihood and Bayesian inferences exhibited identical tree topologies. A clade composed of S. decipiens and S. ranarum formed a sister species to S. erinaceieuropaei, and S. theileri formed a sister species to all species in this clade. Within the diphyllobothridean clade, Dibothriocephalus, Diphyllobothrium and Spirometra formed a monophyletic group, and sister genera were well supported.

• Journal of Fashion Business
• /
• v.8 no.4
• /
• pp.104-116
• /
• 2004

Kanga is a type of cotton clothes with splendid patterns that East African women throw on their bodies. It first appeared in the East African shores in the mid-nineteenth century. A new style of squared handkerchiefs brought to Africa by Portuguese merchants for the first time was referred as to leso of which early designs were in a basic form of white dots on dark background. Consumers called such material by kanga as they began mentioning its craftiness and comparing its elegant nature to a sociable red rooster and graceful feathers. From the early 1990s, Swahili characters have been embroidered in designs of kanga, mainly consisted of proverbs. Kenya's kanga products are widely known and well represented whereas Tanzania makes the best use of it for political and social events. Fascinating and practical kanga has established its position as an essential part of East African cultures that is being well received as a fashion style there in these days.