• Asian-Australasian Journal of Animal Sciences
• /
• v.15 no.12
• /
• pp.1773-1775
• /
• 2002

Tannery waste contained 90.93% DM, 77.02% CP, 0.77% CF, 2.83% EE, 7.19% ash and 3,450 kcal ME/kg DM. A total of 144 day-old broiler chicks were divided into three dietary groups; $D_1$ (Containing 10% protein concentrate-PC), $D_2$ (Containing 5% PC+5% tannery waste-TW) and $D_3$ (Containing 10% TW) having 3 replicates of 16 chicks in each. The birds were fed broiler starter diet containing 22% CP, 3,000 kcal ME/kg and broiler finisher diet containing 21% CP, 3,100 kcal ME/kg up to 42 days of age, and meat yield traits were measured from the representative birds from each replication to asses the feasibility of using tannery waste in the diet of broiler. Feed intake, live weight, feed conversion efficiency and livability did not differ between diets (p>0.05) but the cost of production and profitability differed significantly (p<0.001). Profitability of D1, D2, and D3 diets were 2.98, 9.90 and 14.04 Taka/kg respectively. Diets did not affect on meat yield traits (p>0.05), except gizzard, shank and feather weight (p<0.01). Gizzard and shank weigh were improved with increasing level of tannery wastes in the diet, hence tannery waste can be used without any harmful effect in the broiler diet.

• Bulletin of the Korean Chemical Society
• /
• v.27 no.5
• /
• pp.694-698
• /
• 2006

A method has been described for the chemical speciation, preconcentration and determination of Cr(III) and Cr(VI) species in filtered tannery waste waters by flame atomic absorption spectrometry using ion-exchange resins. Amberlite IR-120($H^+$) strongly acidic cation exchanger and Amberlite IRA-410($CI ^-$) strongly basic anion exchanger resins were used for the separation and preconcentration of Cr(III) and Cr(VI) species, respectively. Optimum condition for preconcentration and speciation was obtained by testing pH of sample and eluent, flow rates of sample and eluent, amount of resins, volume of sample and eluents, and effect of foreign ions. The recommended method has been successfully applied for the preconcentration and determination of chromium species in the dissolved phase of waste water samples collected from a tannery waste water treatment plant in Kayseri, Turkey. The detection limits achieved were 0.73 $\mu$g/L for Cr(III) and 0.81 $\mu$g/L for Cr(VI). Recovery studies showed 99% for Cr(III) and 98% for Cr(VI), for samples spiked with single species.

• Journal of environmental and Sanitary engineering
• /
• v.18 no.4
• /
• pp.36-44
• /
• 2003

The cement-based system among S/S(Solidification/Stabilization) is widely used to treat hazardous wastes. In this study, tannery sludge was solidified to evaluate the stabilization effects of using admixtures in the cement-based S/S. Fly ash as substitute also used to increase the strength of the S/S of hazardous waste. The compressive strength measurement and leaching experiment of chromium metal of solidified mortar were carried out to compare and evaluate the physical and chemical characteristics of solidified hazardous waste sludge. From the result of this study, there was increased of compressive strength by using AEW-3(early-hardening AE water reducing agent), and leaching concentration of chromium became low enough to satisfy the regulatory criteria. The successful solidification for the organic contaminant and heavy metal in hazardous waste should enable to treat by cement-based system using early-hardening AE water reducing admixture and fly ash as substituted cement.

• Carbon letters
• /
• v.21
• /
• pp.81-85
• /
• 2017

The objective of this study is the removal of chromium from tannery wastewater by electrosorption on carbon prepared from lignocellulosic natural residue "peach stones' thermally treated. The followed steps for obtaining coal in chronological order were: cleaning, drying, crushing and finally its carbonization at $900^{\circ}C$. The characterization of the carbon material resulted in properties comparable to those of many coals industrially manufactured. The study of the dynamic adsorption of chromium on the obtained material resulted in a low removal rate (33.7%) without applied potential. The application of negative potentials of -0.7 V and -1.4 increases the adsorption of chromium up to 90% and 96% respectively. Whereas a positive potential of +1.4V allows desorption of the contaminant of 138%.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.4 no.1
• /
• pp.13-21
• /
• 1996

For treating tannery wastewater containing high sulfate and heavy metals, test was performed to assess their performance, competition between SRB (sulfate reducing bacteria) and MPB (methane producing bacteria), and the activity of MPB according to change of chromium concentrations. COD removal efficiency was above 70% at VLR (volumetric loading rate) of 2.0 gCOD/I.day and HRT (hydraulic retention time) of 18hrs at $35^{\circ}C$. In the competition between SRB and MPB, about 15% of the removed COD was utilized by SRB in the begining, but it became 43% at the end. It indicated that MPB was strongly suppressed by the occurrence of significant sulfate reduction since a large electron flow was uptaken by SRB. For the entire experiment, removal efficiencies of chromium concentration were more than 90%. Despite high removal efficiencies of chromium concentration, performance of reactor did not change significantly during the experimental periods. Expecially, chromium (III) is tannery wastewater is less toxic than chromium (VI).

• Journal of Microbiology and Biotechnology
• /
• v.22 no.5
• /
• pp.674-683
• /
• 2012

A new strain, SD12, was isolated from tannery waste polluted soil and identified as Pseudomonas aeruginosa on the basis of phenotypic traits and by comparison of 16S rRNA sequences. This bacterium exhibited broad-spectrum antagonistic activity against phytopathogenic fungi. The strain produced phosphatases, cellulases, proteases, pectinases, and HCN and also retained its ability to produce hydroxamate-type siderophore. A bioactive metabolite was isolated from P. aeruginosa SD12 and was characterized as 1-hydroxyphenazine ((1-OH-PHZ) by nuclear magnetic resonance (NMR) spectral analysis. The strain was used as a biocontrol agent against root rot and wilt disease of pyrethrum caused by Rhizoctonia solani. The stain is also reported to increase the growth and biomass of Plantago ovata. The purified compound, 1-hydroxyphenazine, also showed broad-spectrum antagonistic activity towards a range of phytopathogenic fungi, which is the first report of its kind.

• Food Science of Animal Resources
• /
• v.30 no.2
• /
• pp.190-197
• /
• 2010

The present study was conducted to determine the effect of tannery waste protein concentrate (TWPC) on fattening of cattle and the carcass and meat quality, with the aim of replacing the costly commercial protein concentrate (Jasoprot) with a more economical and effective alternative. Twelve young cattle (six male and six female) were fed during the study period on a control diet (T1) with 10% Jasoprot and on two test diets: 5% TWPC + 5% Jasoprot (T2) and 10% TWPC (T3). The test diets significantly affected (p<0.05) live weight gain and profitability compared to the control diet, perhaps due to the increased protein and essential amino acid content, relative to Jasoprot. TWPC was free of aflatoxin. Sensory-evaluated organoleptic scores did not differ among the groups. Chemical composition was normal as other beef and was non toxic especially within recommended chromium level ($1.90{\pm}0.6{\mu}g$) Total lipid contents were higher (p<0.05) in T3, and moisture, ash and crude protein contents were almost similar (p>0.05) among the three groups. It is concluded that TWPC or an equal mixture of TWPC and Jasoprot may be an economic and efficient alternative protein source to Jasoprot in the cattle industry, which minimizes adverse effects on carcass and sensory meat quality.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.6 no.1
• /
• pp.43-52
• /
• 1998

The objective of this study is to investigate the optimum conditions of extracting collagen without chrome ion from the leather waste. The effect of temperature, pH, and the concentration of alkaline solution on the collagen extraction has been studied. The result indicated that the incipient denatured temperature of collagen measured by viscosity was $25^{\circ}C$ and the complete denatured temperature was $31.5^{\circ}C$. The optimum solubilization condition for temperature was between $15^{\circ}C$ and $20^{\circ}C$, pH was 1.5, the concentration of alkaline solution was 3% of sodium hydroxide. The almost complete chrome ion separation was possible around the pH of 1.5. The separation efficiency of chrome ion from tannery waste was more than 99.5%. Extraction efficiency of crude protein from leather waste was about 89.5%. The hydroxyproline and collagen content in the extracted crude protein were 8.53% and 63.62%, respectively.

• Journal of the Korean Applied Science and Technology
• /
• v.23 no.1
• /
• pp.19-25
• /
• 2006

Flesh wasters from tannery create major environmental problems. Despite their considerable fat content, these waster do not find important usage. Their disposal is also troublesome and costly. We have investigated the possible use of this fat as the production of biodiesel(fatty acid methyl esters) by transesterification using with fossil fuels. The fat released the waste by boiling water under the optimal condition (i.e., temperature, $120^{\circ}C;$ decompression, 200mbar) and used to dry without refining for the production of fatty acid methyl esters. Under the optimal condition, the experimental value of biodiesel yield was about 96%. The result of the chemical and GC analysis showed fatty acid composition and characteristics of biodiesel. Evaluation of the product indicated that it was suitable for use as a biodiesel fuel. In result of this experiment oil extract from fleshing process can be transformed into an environmentally affination fuel, to provide economical and ecological profits.

• Clean Technology
• /
• v.10 no.1
• /
• pp.27-35
• /
• 2004

Domestic leather company is working hard to solve present environmental problem. Leather industry is realized by representative pollution industry. An advanced nation is trying to develop clean technology by collaborating research institute with the chemical company, and tannery. This research introduced information that is gained through technical transfer in leather processing. This project started to solve environmental problem of leather industry. Specially the environment and economic problem is caused from chrome which exists in the waste water or solid waste. Representative technologies, reduced chrome tanning, non-chrome tanning method, are being introduced through transfer. Also lightweight leather development advances the research which uses non-metal tanning agent.