• 제목/요약/키워드: Tank mixture

검색결과 86건 처리시간 0.026초

Heat Transfer Characteristics of the Spherical Capsule Storage System Using Paraffins

  • Cho, Keum-Nam;Choi, S. H.
    • International Journal of Air-Conditioning and Refrigeration
    • /
    • 제6권
    • /
    • pp.113-123
    • /
    • 1998
  • The present study is to investigate the effect of experimental parameters on the heat transfer characteristics of a spherical capsule storage system using paraffins. N-Tetradecane and mixture of n-Tetradecane 40% and n-Hexadecane 60% were used as paraffins. Water with inorganic material was also tested for the comparison. The experimental parameters were varied for the Reynolds number from 8 to 16 and for the inlet temperature from -7 to 2$^{\circ}C$. Measured local temperatures of spherical capsules in the storage tank were utilized to calculate charging and discharging times, dimensionless thermal storage amount, and the average heat transfer coefficients in the tank. Local charging and discharging times in the storage tank were significantly different. The effect of inlet temperature on charging time was larger than that on discharging time, but the effect of Reynolds number on charging time was smaller than that on discharging time. Charging time of paraffins was faster by 11~72% than that of water with inorganic material, but little difference of discharging time was found among them. The effect of Reynolds number on the dimensionless thermal storage was less during charging process and more during discharging process than the effect of inlet temperature. The effect of the inlet temperature and the Reynolds number on the average heat transfer coefficient of the storage tank was stronger during discharging process than during charging process. The average heat transfer coefficients of the spherical capsule system using paraffins were larger by 40% than those using water.

  • PDF

몇 가지 살충제의 혼용 및 혼합 시 독성반응 (Acute toxicity response caused by mixture or tank mix of several insecticides)

  • 이제봉;정미혜;성하정;이해근;양재설
    • 농약과학회지
    • /
    • 제5권4호
    • /
    • pp.57-61
    • /
    • 2001
  • 영농에서 노동력 절감을 위해 $2{\sim}3종$ 농약을 혼용하여 살포하는 것은 흔한 농약살포 방법이다. 과수 재배시 널리 사용되고있는 4종 살충제의 상호혼합 및 혼용이 인체에 미치는 영향을 구명하고 안전성을 확보할 목적으로 급성독성시험, 유기인계 및 카바메이트계 농약의 주 저해효소인 콜린에스테라제의 활성에 미치는 영향을 평가하였다. 포스팜액제, 디디브이피 유제, 피레스 유제 및 푸라치오카브 유제의 단제 및 혼합제에 대한 급성독성 및 콜린에스트라제의 활성에 미치는 영향을 시험한 결과 포스팜 액제 및 디디브이피 유제의 급성경구독성 $LD_{50}$은 랫드에서 각각 30 mg/kg, 93 mg/kg로 고독성이었으며 나머지는 보통독성이었다. 혼합에 의한 급성경구 및 경피독성 시험결과, $LD_{50}$이 이론치보다 $0.29{\sim}1.0$ 배정도 낮은 상승독성이 발현되었다. 혼용에 의한 급성경구독성 시험결과 포스팜+디디브이피 조합의 경우, $LD_{50}$이 16 mg/kg로 맹독성 농약으로 구분되었으며, 그 외의 조합은 모두 고독성 농약으로 구분되었다. 급성경피독성시험의 경우도 경구와 동일한 결과로 독성발현이 전체적으로 상승되었다. 농약의 혼합에 의한 혈장내 cholinesterase 의 $ID_{50}$의 변화는 약제처리 30분에는 이론치보다 현저한 효소억제가 인정되었으나, 60분에는 이론치와 큰 차이가 없었다.

  • PDF

Evaluation of dose received by workers while repairing a failed spent resin mixture treatment device

  • Choi, Woo Nyun;Byun, Jaehoon;Kim, Hee Reyoung
    • Nuclear Engineering and Technology
    • /
    • 제54권2호
    • /
    • pp.442-448
    • /
    • 2022
  • Intermediate-level radioactive waste (ILW) is not subject to legal approval for cave disposal in Korea. To solve this problem, a spent resin treatment device that separates 14C-containing resin from zeolite/activated carbon and desorbs 14C through a microwave device has been developed. In this study, we evaluated the radiological safety of the operators performing repair work in the event of a failure in such a device treating 1 ton of spent resin mixture per day. Based on the safety evaluation results, it is possible to formulate a design plan that can ensure the safety of workers while developing a commercialized device. When each component of the resin treatment device can be repaired from the outside, the maximum and minimum allowable repair times are calculated as 263.2 h and 27.7 h for the 14C-detached resin storage tank and zeolite/activated carbon storage tank, respectively. For at least 6 h per quarter, the worker's annual dose limit remains within 50 mSv/year; further, over 5 years, it remained within 100 mSv. At least 6 h of repair time per quarter is considered, under conservative conditions, to verify the radiological safety of the worker during repair work within that time.

혐기성(嫌氣性) 소화방식(消化方式)에 의한 분뇨(糞尿)와 정화조(淨化槽)슬러지의 혼합처리(混合處理) 실험(實驗)에 관한 연구(硏究) (Treatability Study for the Nightsoil and Septic Tank Sludge by Anaerobic Digestion)

  • 이광호;신응배;한건연
    • 대한토목학회논문집
    • /
    • 제2권1호
    • /
    • pp.69-80
    • /
    • 1982
  • 본(本) 연구(硏究)는 분뇨처리(糞尿處理)의 효율화( 效率化) 방안(方案)으로 정화조(淨化槽)슬러지와 생분뇨(生糞尿)를 현존(現存) 소화식(消化式) 분뇨처리장(糞尿處理場)에서 혼합처리(混合處理)할 수 있는 방안(方案)을 검토(檢討)할 목적(目的)으로 분뇨(糞尿) : 정화조(淨化槽)슬러지의 혼합비율(混合比率)을 9 : 1(#1), 7 : 3(#2)으로 하여 처리도(處理度) 실험(實驗)을 수행(遂行)하였다. 실험결과(實驗結果) 유기물(有機物)의 제법효율(除法效率)은 9 : 1(#1)의 비율(比率)에서 BOD 80%, COD 80%, TS 63%, VS 76%이었으며 7 : 3(#2)의 비율(比率)에서는 BOD 87%, COD 82%, TS 66%, VS 78%로 정화조슬러지를 분뇨처리장에서 혼합처리(混合處理)할 수 있는 충분(充分)한 가능성(可能性)을 보여주었다.

  • PDF

Dose analysis of nearby residents and workers due to the emission accident of gaseous radioactive material at the spent resin mixture treatment facility

  • Jaehoon Byun;Seungbin Yoon;Hee Reyoung Kim
    • Nuclear Engineering and Technology
    • /
    • 제55권12호
    • /
    • pp.4543-4553
    • /
    • 2023
  • The dose from a possible accident at a microwave-based spent resin mixture treatment facility that was to be installed and operated at the Wolsong nuclear power plant was analyzed to evaluate the radiological safety prior to its installation and operation. The dose to which workers and nearby residents are likely to be exposed was calculated based on the atmospheric dispersion and deposition factors using the XOQDOQ code. The highest atmospheric dispersion factors were 1.349E-05 s/m3 (workers) and 1.534E-06 s/m3 (residents). The highest doses due to emissions from the mock-up tank before operation were 1.91E-06 mSv (workers) and 1.78E-07 mSv (residents). Even after 3 h of operation, emissions from the mock-up tank had the greatest impact ranging from 4.63E-08 to 1.24E-06 mSv (workers) and 2.74E-10 to 1.16E-07 mSv (residents), respectively. The doses were 7.09E-09-4.55E-07 mSv and 4.18E-11-4.25E-08 mSv at 4-5 h of operation, and the maximum doses after operation reached 5.69E-07 mSv and 5.31E-08 mSv for the workers and residents, respectively. Even at the exclusion area boundary (EAB), 4.76E-08-9.51E-07 mSv (annual dose:9.52E-05–1.90E-03 mSv/y) was below the dose limit of the EAB, and the safety of the facility installation inside the NPP was confirmed.

손상 선박 기름 유출량 추정을 위한 수치해석과 이론식의 비교 연구 (A Comparative Study of Numerical and Theoretical Predictions of Oil Outflows from Damaged Ships)

  • 문요섭;김제인;박일룡;서성부;이승국;최혁진;홍사영
    • 대한조선학회논문집
    • /
    • 제59권6호
    • /
    • pp.400-412
    • /
    • 2022
  • This paper provides the results of numerical and theoretical predictions of oil outflows from damaged single-hull and double-hull ships.Theoretical equations derived from the unsteady Bernoulli equation and a CFD method for multi-phase flow analysis were used to estimate the oil outflow rate from cargo tank. The predicted oil outflow rate from a single-hull cargo tank damaged due to grounding and collision accidents showed a good agreement with the available experimental results in both numerical and theoretical analyses. However, in the case of the double-hull conditions, the time variation of the amount of water and oil mixture inside the ballast tank predicted by the theoretical equation showed some different behavior from the numerical results. The reason was that the interaction of the oil flow with the water inflow in the ballast tank was not reflected in the theoretical equations. In the problems of the initial pressure condition in the cargo and ballast tanks, the oil outflow and water inflow were delayed at the pressure condition that the tanks were sealed. When the flow interaction between the oil and water in the ballast tank was less complicated, the theoretical and the numerical results showed a good agreement with each other.

예혼합 압축착화 디젤엔진의 분사시기 변화에 따른 혼합기 형성 과정 및 연소 특성에 관한 연구 (A Study on the Mixture Formation Process and Combustion Characteristics According to Injection Timing in Premixed Charge Compression Ignition)

  • 조병호;한용택;이기형;이창식
    • 대한기계학회논문집B
    • /
    • 제26권12호
    • /
    • pp.1692-1698
    • /
    • 2002
  • A diesel engine has various merits such as high thermal-efficiency, superior fuel consumption and durability. Therefore the number of diesel engine in the world is increasing. As the seriousness of environmental pollution increases in the world, the method to reduce the noxious materials of $CO_2$, NOx and P.M. is very important subject to correspond to exhaust gas regulations. A new concept, so called premixed charge diesel combustion(PCCI), is focused among the various corresponding manners. In this study, we investigated the mixture formation within the cylinder with injection timing using GTT simulation code and also compared combustion characteristics of PCCI engine with that of commercial diesel engine. From this experiments, it could be found that homogeneous mixture formation was observed according to advance of injection timing and simultaneous reduction of NOx and Soot in injection timing of BTDC 60$^{\circ}$.

성층 온수 저장 중 과도 열거동과 축열효율에 관한 연구 (A Study on Transient Thermal Behavior During the Charging Process in a Stratified Water Storage Tank and Its Storage Efficiency)

  • 박이동;주용진;김영헌
    • 태양에너지
    • /
    • 제17권3호
    • /
    • pp.13-21
    • /
    • 1997
  • 장기 성층 온수 저장조 내의 중간 경계면에서 전달되는 열량을 예측하기 위하여 이론식을 유도 확립하고 이론적인 축열효율을 구하였다. 그리고 이론 축열효율값과 비교 고찰하기 위하여 여러 실험 조건을 통한 실제 축열효율을 구하였고, 저장조 내의 중간 경계면에서 일어나는 혼합정도를 효과적으로 해석하기 위하여 유효 열확산 계수를 정량화하였다. 중간 경계면에서 열전도에 의한 손실이 일회 충수 시간이 짧을수록 즉, Pe 수가 증가할 수록 많이 발생함을 알았다.

  • PDF

A Numerical Study of the Effects of Piston Head Configurations on Stratified Mixture Formation in Gasoline Direct-injection Engines

  • Cha, Kyung-Se;Park, Chan-Guk;Tomoyuki Wakisaka
    • Journal of Mechanical Science and Technology
    • /
    • 제16권4호
    • /
    • pp.557-563
    • /
    • 2002
  • In this paper, the characteristics of flow and spray motions affected by from piston head configurations were investigated numerically. Calculations were carried out from intake process to the end of compression. GTT (Generalized Tank and Tube method) code, which includes a third order upwind Chakravarthy-Osher TVD scheme and k-$\varepsilon$ turbulence model with fuel spray analysis was used for the calculations. As a results, piston heads with smaller radii of curvature were found to give stronger reverse tumble than those with larger radii of curvature. Similar results are shown in the convection and diffusion of fuel sprays.

액체추진 발사체의 추진제 소진시스템 (Propellant utilization system on liquid-fuelled rocket)

  • 조기주;임석희;정영석;오승협
    • 한국추진공학회:학술대회논문집
    • /
    • 한국추진공학회 2006년도 제27회 추계학술대회논문집
    • /
    • pp.203-206
    • /
    • 2006
  • 액체 추진로켓의 총역적을 극대화를 위한 추진제 잔류량 최소화를 목적으로 하는 추진제 소진 시스템에 대한 분석을 수행하였다. 추진제 잔류량 변화의 주요 인자는 비행중 추진제 혼합비와 추진제의 실제 탑재량이다. 특히 극저온 추진제를 이용할 경우에는 온도 변화에 따른 밀도 변화가 잔류량 변화에 큰 영향을 준다. 비행 중 산화제 및 연료의 수위를 측정하여 필요 시 엔진으로 공급되는 유량을 조절함으로서 산화제 및 연료가 동시에 소진되도록 하는 시스템을 이용하여 잔류량을 최소할 수 있다. 이러한 시스템을 도입하기 위해서는 액체 로켓엔진의 혼합비 제어 시스템이 동반되어야 한다.

  • PDF