• Herbal Formula Science
• /
• v.12 no.1
• /
• pp.225-246
• /
• 2004

Objectives: This study has been done to compare the Talcum's composition before and after using processing method and to clarify its quality and naming through the historical herbal books. Methods: I studied the Talcum and processed Talcum by physical and chemical method which contain microscopic analysis, X-ray diffraction analysis, thermal analysis, XRF, ICP, etc, to compare the compositions and its characters. Results: Talcum is a magnesium hydroxidfe(($Mg_3[Si_4O_{10}][OH]_2$)). Talcum contains a main ingredients of MgO 29.03-30.40%(31.70%), $SiO_2$ $62.00{\sim}62.40%(63.50%)$, $H_2O$ $4.40{\sim}4.85%(4.80%)$ and small ingredients, also. Conclusion: A radio-element contents of U, Th contain less than average contents of the lithosphere's U 1.8ppm, Th 7.2ppm. There are two sorts of Talcum which are a northern Talcum(solid Talcu) and southern Talcum(soft Talcum). A northern natural products of Talcum(solid Talcum) are used mostly in korea and china.

• Herbal Formula Science
• /
• v.16 no.2
• /
• pp.31-45
• /
• 2008

This report describes 54 prescriptions related to the use of Talcum mainly blended prescriptions in Dongeuibogam. The following conclusion were reached through investigations on the prescriptions that use Talcum as a key ingredient. Prescriptions that Talcum was taken as a monarch drug are utilized for 22 therapeutic purposes. In particular, 35.2% of prescriptions appear in the chapter of urine, 7.4% of those appear in the chapter of heat. Prescriptions that utilize Talcum as the main ingredient are used in the treatment of uric disease, gonorrhea, heat disease, febrile disease, and they are also used for treating 16 different types of diseases. Talcum is used in pathogenic factors such as heat, wind with heat, and used in pathology related to the fever of small intestine and bladder. The dosage of Talcum is 3jeon(about 11.25g) to 2.5pun(about 0.94g), however 1jeon(about 3.75g) has been taken the most for clinical application. Ikwonsan is the most useful base prescription which use the Talcum as the main ingredient.

• The Journal of Korean Medicine Ophthalmology and Otolaryngology and Dermatology
• /
• v.33 no.3
• /
• pp.1-26
• /
• 2020

Objectives : This study was to examine the effects of 3 types of BTS which were excluded talcum only or replaced talcum to Lonicera japonicae Flos or Kochiae Fructus on the DNCB-induced atopic dermatitis in mice. Methods : In this study, Balb/c mice were divided into five groups: normal, control, GBT(BTS except talcum), GBTG(GBT added Lonicera japonicae Flos), and GBTJ(GBT added Kochiae Fructus). And the effects on atopic dermatitis were evaluated by weight change, ear's thickness and weight, thickness of dorsal skin, severity scale of dorsal skin, histopathologic findings of dorsal skin by H&E and toluidine blue stain, proliferation of splenocyte and thymocyte in vitro, proliferation of splenocyte in vivo, IL-4, TNF-α, IgE in serum. Results : There were no significantly changes in body weight and effect of ear's weight in GBT, GBTG, and GBTJ group. The thickness of ear of GBT and GBTJ group showed significant decrease. And the thickness of dorsal skin of GBTJ group significantly decreased compared to the control, GBT, and GBTG group. All the treated groups significantly decreased in severity scale, histopathologically reduced epidermal thickness, and mast cell infiltration. In vitro, all the treated groups increased in the proliferation rates of splenocyte. However, in vivo study, it showed a falling tendency and GBT group significantly decreased compared to control, GBTG, and GBTJ group. In vitro study, GBTG group significantly decreased in the proliferation rates of thymocyte. There was no IgE contents chnage in GBT, GBTG, and GBTJ groups but IL-4 and TNF-α contents were significantly decreased. Conclusions : GBT, GBTG, and GBTJ are expected to improve symptoms of atopic dermatitis and further studies are needed for development of BTS's transformation.

• Journal of the Korean Society of Safety
• /
• v.5 no.1
• /
• pp.41-48
• /
• 1990

In this study the explosion characteristics of terephtalic acid dust(PTA) was investigated with the Hartmann type apparatus. The minimum ignition energy, minimum explosible concentration, flame propagation velocity, explosion pressure, explosion pressure rise rate and the effect of inert dust(talcum) on explosion characteristics were measured. Flame velocity was 50m/s at 700g/m$^3$ concentration, and the explosion pressure and explosion pressure rise rate were most likely with that of gas explosion. It was found that an inert dust acts as a heat sinker and it disturbs the combustion of flammable dust, as a result, explosion pressure and explosion pressure rise rate were decreased and minimum explosion concentration was increased with increasing the fraction of talcum dust in PTA.

• Journal of Chest Surgery
• /
• v.26 no.7
• /
• pp.532-537
• /
• 1993

To assess the therapy of spontaneous pneumothorax in the aged patients, the treatment methods and results in 60 patients 50 years of age or older were retrospectively reviewed. Most of the patients were male [56 of 60 patients] and the major underlying lung diseases associated with spontaneous pneumothorax were tuberculosis [32 patients] and chronic obstructive lung disease [20 patients]. The recurrence rate of thoracostomy tube drainage with or without chemical pleurodesis using tetracycline was 39.6% [21 of 53 patients], but there was no recurrence in the patients treated with open thoracotomy, pleural abrasion, and chemical pleurodesis using talcum powder[Asbestosis free]. In the patients treated with open thoracotomy, the bullous or bleb lesions were placed in the various sites of both lungs. We concluded that even though thoracostomy tube drainage is the first choice of therapy for spontaneous pneumothorax in the aged patients, the recurrence rate is high, especially in the patients with persistent air leakage for more than 2 days, and the open thoracotomy with pleural abrasion and chemical pleurodesis using talcum powder can prevent the recurrence in the selected patients.

• The Journal of Internal Korean Medicine
• /
• v.22 no.4
• /
• pp.709-715
• /
• 2001

Pressure sore(Decubitus ulcer) is an area of ulceration and necrosis of the skin and underlying tissues occurring over the body prominence such as the sacrum, greater trochanter, scapula, lateral malleolus, thoracic spine and heels after prolonged or often repeated pressure. These days incidence of pressure sore have been increased because of the many population of the old, traffic accidents and cerebral vascular disease. But the treatment was not confirmly established. As for treatment, we used Talcum powder for 10 days in case 1 and 6 days in case 2. The patients were improved within 14 days after treatment in case 1 and 10 days in case 2.

• Journal of architectural history
• /
• v.20 no.5
• /
• pp.47-61
• /
• 2011

This study examined the background and change of building Yeongam eupseong and characteristics and construction method of its spatial structure. The results of this study can be summarized as follows. First, Yeongam eupseong was built for the same purpose of national border defense against the invasion of Japanese army as other Eupseongs were built and it was found first in the literature in the era of King Munjong of Joseon Dynasty with the scale of three gates and 4,369 cheok of castle wall. Such a scale was continued and in particular, according to flat structure, road network and gate position shown in the map, the form and road system of Yeongam eupseong before the 19th century were mostly identical with the current ones. Second, castle wall was built over foundation by using talcum after leveling the foundation soil and castle wall can be divided into outer wall, filling part and inner wall from the section. Outer wall was constructed by inserting and layering pebbles with big irregular stone, filling part was made with talcum and riprap and inner wall with soil in several layers by keeping gradient. This building method showed common features in inserting and layering pebbles for outer wall, use of protruded base and section form compared to Jeollado Eupseong.

• Korean Journal of Environment and Ecology
• /
• v.20 no.4
• /
• pp.436-447
• /
• 2006

Recently, there is increasing demand on enhancing the efficiency of hydro-seed spraying in afforestation for damaged or degraded land including forest road slopes. In this study, we focus on how seed coating and molding may affect seed germination and seedling growth. Plant species used in the study are Lespedeza cyrtobotrya, Indigofera pseudotinctoria, Arudineila hirta, Poa pratensis, and Lolium perenne. The results of seed germination and seedling growth with and without seed coating and molding are analyzed as follows: 1. For all the species and in both seeding with molding covered with soil and seeding without molding in which seeds were over sown, the increment of germination ratio by seed coating method is greater than by non·coating one. Seed coating increases average germination ratios observed in seeding with molding and without molding by 11.2% and 21.4%, respectively. Germination force may decrease from 0.8 to 3.7 days depending on the plant species and the treatments. The $LD_{50}$ decreased by $0.8{\sim}2.6$ days. However, seed coating delays the start of germination by approximate 1 day for all of the observed plants. 2. Seed coating may have the effect of accelerating the growth of stem and leaf and root. The experimental result shows that seed coating leads to 21.7% and 34.8% increment of average stem and leaf growth by seeding with molding and without molding, respectively. In terms of root growth, seeding with molding results in 22.0% increment while seeding without molding produces 26.2% increased root growth. 3: Compared to seeding without molding, germination starts on an average of 1.3 days later in seeding coated seeds with molding. However. the germination ratio is increased by 5%, and germination force and $LD_{50}$ are observed to shorten by 1.0 day and 1.4 days, respectively. Meanwhile, whether seeds are coated or not may be more related with germination and seedling growth in seeding without molding than with those in seeding with molding. 4. In this study, coating materials are examined to look at which ones are better in each treatment. Coating with Vermiculite+Talcum is the most effective in germination and seedling growth for overall plants. Seed coating using Bentonite, Calcium Carbonate, and Calcium Hydroxide shows better results than non-coating does. 5. When seeds are coated, the greatest enhancement of seed germinations was observed in Indigofera pseudotinctoria and, in the case of seedling growth, Lespedeza cyrtobotrya has the most increasing observation value among the 5 examined species. These results may indicate that woody plant seeds, having greater sizes of seeds than ones of grass seeds, may have greater relation with seed coating than grass plant seeds may have. 6. Therefore, if seeds cannot be molded up after hydro-seeding on forest road slopes, it is recommended that seeds for restoration be pre-coated with Vermiculite+Talcum and then be sowed, in order to quickly stabilize the damaged slope and achieve successful afforestation.

• Fire Science and Engineering
• /
• v.31 no.1
• /
• pp.50-57
• /
• 2017

The present article discusses the response characteristics of smoke detector chamber due to dust and wind velocity. Although situations have improved in terms of early sensing of fires as the smoke detectors are applied indoors, studies tend to place insufficient focus on the side effects and malfunction that can be caused by diversified life dust produced indoors and environmental requirements, etc. Therefore, in the present study, 4 types of photoelectric smoke detectors with different forms and structures of smoke chamber were selected as the experimental objects, and dust test was conducted with fly ash, talcum powder and fiber dust as experiment samples to study indoor applicability of the smoke detectors in terms of their response to diversified dust and wind velocity. Also, to observe response characteristics due to pollution level inside the smoke chamber, wind velocity for dust test were set additionally at 0.25 m/s, 0.5 m/s, and 1.0 m/s. Based to the experimental results, fly ash, talcum powder, and fiber dust (black hair powder) were found to be suitable at the dust test reference wind velocity conditions of 0.25 m/s for both operation test and non-operation test after dust application. On the other hand, under the harsh wind velocity conditions of 0.5 m/s and 1.0 m/s, malfunction of unwanted alarm was observed in non-operation tests in the case of fly ash and talcum powder, and non-operation was confirmed to occur in the case of fiber dust as the alarm failed to operate normally in operation tests.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.24 no.2
• /
• pp.155-162
• /
• 2004

Different adhesives(CF-clear, arabic gum, cethylmethyl cellulose, polyvinyl alcohol, polyvinyl pyrrolidone, hydroxy propyl cellulose, methyl cellulose) and particulate matters(bentonite, kaolin, calcium carbonate, peatmoss, talcum, vermiculite, zeolite, calcium hydroxide, plaster, calcium phosphate, vermiculite + calcium carbonate, vermiculite + kaolin, vermiculite + talcum) were evaluated by coating index method. According to the weight of single coated seeds, CF-clear and polyvinyl alcohol appeared to be the best coating adhesives for red clover and tall fescue seeds. Both vermiculite and vermiculite + talc(l : 1) for red clover, and vermiculite + talc(l : 1) for tall fescue appeared to be the best particulate matter(P < 0.01). Percent friability showed excellent results for the arabic gum, CF-clear, and polyvinyl alcohol when compared to others(p < 0.01). The coating index showed high with vermiculite and vermiculite + talc(l : 1) in coating red clover seed, and talc, vermiculite, and vermiculite + talc showed good coating index in coating tall fescue seed.