• Korean Journal of Medicinal Crop Science
• /
• v.9 no.4
• /
• pp.295-300
• /
• 2001

This experiment was conducted to evaluate the germination rate according to temperature, pelleting materials, pelleted size, seed storage periods under light and dark conditions in Rehmannia glutinosa. The highest germination rate was obtained from $25^{\circ}C$ in both light and dark condition. Two-year old seeds showed higher germination rate compared to one-year old seed. Talc material showed the highest germination rate among the pelleting materials by 82.5%. Among the different pelleting sizes, the highest germination rate was shown in 2.0 mm, and especially Talc pelleting showed 100% germination rate on 17days after seeding. In case of combination of pelleting materials, both of talc + vermiculite, zeolite + vermiculite showed lower germination rate than the control and 0.7 mm pelleted seed showed the highest germination rate.

• Journal of Pharmaceutical Investigation
• /
• v.13 no.2
• /
• pp.73-87
• /
• 1983

The matrix affects the dissolution of furosemide, which is almost insoluble in the dissolution medium. In order to understand the effect of the matrix on the dissolution of furosemide, lactose, starch, $Avicel\;^{\circledR}pH\;101$, $Avicel\;^{\circledR}pH\;301$, $SiO_2$ and talc were used as the matrix and the solvent deposition method were used. The dissolution characteristics of four dissolution medium were compared to each other using various ratio of drug-to-matrix. The results are as follows: 1) Lactose was shown to be superior and talc was to be inferior to the other matrixes investigated. 2) A maximum dissolution rate and dissolution amount of furosemide were observed in 1 : 10 ratio of the drug-to-matrix. 3) $T_{80%}$ of 1 : 10 ratio of the drug-to-matrix in pH 7.2 was 1 min. from FM-lactose and 30 min. from FM-talc. $T_{50%}$ in pH 4.2 is 2 min. from furosemide-lactose and 150 min. from furosemide-talc. Total amount of furosemide in pH 1.2 at 30 min. were enhanced 13.3 fold in furosemide-lactose and 3.5 fold in furosemide-talc compared to the control. Diuretic action of those furosemide-lactose and furosemide-talc was also evaluated by monitoring changes in urinary excretion of sodium, potassium and urine volume in rat. The accumulated urine volume were enhanced 1.7 fold in furosemide-lactose (1.5) compared to the furosemide.

• Journal of Conservation Science
• /
• v.25 no.1
• /
• pp.77-86
• /
• 2009

The physical properties of the epoxy resins were studied with an addition of filler content and the application of artificial weathering test. When talc as a filler was added to the epoxy resin (L-30), the water resistance seemed to be increased because of the results of the reducing of water absorption rate and the increasing of contact angle. Although the adhesive strength of epoxy resins was not affected by the increasing amount of talc, its compressive strength was reduced. The physical properties of the epoxy resins had different trends according to the site environments. The artificial weathering test with the change of temperature and humidity showed that the changes of water absorption rate and colour differences of the epoxy resins containing talc were lower than the pure epoxy resin itself. However, the contact angle was higher. The artificial weathering test with ultraviolet irradiations showed the opposite result; the damage of epoxy resins was increased with the increasing of talc content. These mean the site environment of the stone monuments should be considered to determine the content of talc added to increase the durability of epoxy resin.

• Journal of Chest Surgery
• /
• v.40 no.7 s.276
• /
• pp.492-498
• /
• 2007

Background: Malignant pleural effusion is a common condition in neoplastic patients and palliative therapy is the usual treatment. Talc has been generally accepted to be the most effective sclerosant for chemical pleurodesis, but the optimal route of administration remains controversy. We compared the results of video-assisted thoracoscopic talc poudrage (VTP) with administering a bedside talc slurry through a chest tube (BTS) for the treatment of malignant pleural effusion. Material and Method: From December 2004 to May 2006, 20 patients with malignant pleural effusion underwent chemical pleurodesis via VTP (group A, n=10), and BTS (group B, n=10). Result: The durations of chest tube placement after the procedure were $7.0{\pm}4.0$ days (group A) and $6.7{\pm}3.6$ days (group B). The hospital stays were $24.3{\pm}9.4$ days (group A) and $30.7{\pm}21.5$ days (group B), respectively. The symptoms of dyspnea were much more improved in group A (p-value=0.014) after discharge (mean f/u group $A=8.5{\pm}2.2$ months, group B $8.0{\pm}7.4$ months). The collapsed portions of lung were better expanded in group A than in group B (p-value=0.011). Conclusion: We recommend VTP for the selected patients with malignant pleural effusion because of the advantages of dissecting the fibrous peel to relieve the atelectasis and dyspnea, and excising the pleura for diagnosis with direct viewing of the lesion.

• Journal of the Mineralogical Society of Korea
• /
• v.31 no.1
• /
• pp.47-55
• /
• 2018

Talc, hydrous magnesium phyllosilicate, is one of the most popular industrial minerals due to their chemical stability and adsorptivity. While micro-sized talc has long been used as a filler and coating, nano-sized talc recently is attracting attention as additives for improving the stability of nanocomposites. In this study, we produced the nano-sized talc powder by mechanical method using high energy ball mill and investigated the changes in particle size and crystallinity with increasing milling time up to 720 minutes. X-ray diffraction results show that the peak width of talc gradually as the milling proceeded, and after 720 minutes of pulverization, the talc showed an amorphous-like X-ray diffraction pattern. Lase diffraction particle size analysis presents that particle size of talc which was ${\sim}12{\mu}m$ decreased to ${\sim}0.45{\mu}m$ as the milling progressed, but no significant reduction of particle size was observed even after grinding for 120 minutes or more. BET specific surface area, however, steadily increases up to the milling time of 720 minutes, indicating that the particle size and morphology change steadily as the milling progressed. Scanning electron microscope and transmission electron microscope images shows that layered particles of about 100 to 300 nm was aggregated as micro-sized particles after pulverization for 720 minutes. As the grinding time increases, the particle size and morphology of talc continuously change, but the nano-sized talc particles form micro sized agglomerates. These results suggest that there is a critical size along the a, b axes in which the size of plates is reduced even though the grinding proceeds, and the reduction of plate thickness along the c axis leads the increase in specific surface area with further grinding. This study could enhance the understanding of the mechanism of the formation of nano-sized talc by mechanical grinding.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.5
• /
• pp.557-562
• /
• 2018

Unlike live ammunition which has killing power due to the use of high explosives, training ammunition has only the limited explosive effect needed for training purposes, so the risk of accidents is lowered. Because training ammunition is used in large quantities during military drills, the problem of environmental pollution occurs. As most of the waste is left out in the training field, using bio-degradable polymers such as Polylactic Acid (PLA) can provide a solution to these environmental issues. However, bio-degradable polymers such as PLA usually have poor thermal and mechanical properties compared with other general purpose polymers, so they need to be improved before they can be used for military purposes. In this study, Talc is added to the PLA used for the parts of Training Grenades to improve some of their properties and the changes of their thermal and mechanical properties were verified. In the case of the 1 wt.% ~ 5 wt.% PLA/Talc blends, the thermal properties were improved in proportion to the content of Talc, but the best mechanical properties were observed for the 1 wt.% and 3 wt.% PLA/Talc blends.

• Tuberculosis and Respiratory Diseases
• /
• v.45 no.4
• /
• pp.785-794
• /
• 1998

Background: Chemical pleurodesis is a widely used method for the control of symptomatic and recurrent malignant pleural effusions. Talc has been accepted to be the most effective sclerosing agent for chemical pleurodesis. This study was undertaken to evaluate the usefulness of talc pleurodesis via video-assisted thoracoscopic surgery (VATS) in treatment of malignant pleural effusions. Methods : A retrospective analysis of the medical records and radiographic findings was performed. The success of the procedure was defined as daily pleural fluid drainage below 100ml within 1 week after pleurodesis and complete expansion of the lung on simple chest radiograph. Recurrence was defined as reaccumulation of pleural fluid on follow-up chest radiographs, and complete response as no fluid accumulation on follow-up chest radiographs. Results: Between October 1994 and August 1996, talc pleurodesis via VATS was performed in 35 patients. Duration of follow-up ranged from 5 days to 828 days(median 79days). The initial success rate of procedure was 88.6%(31 of 35 cases). Complete responses were observed in 92.8% at 30 days, 75.7% at 90 days and 64.9% at 180 days. Postoperative complications were fever (54.3%), subcutaneous emphysema(11.4%), reexpansion pulmonary edema(2.9%) and respiratory failure(5.7%). But procedure related mortality or respiratory failure was not found. Conclusion: Talc pleurodesis via VATS is a safe and effective method for the control of symptomatic malignant pleural effusions.

• Proceedings of the KSEEG Conference
• /
• 2005.04a
• /
• pp.275-278
• /
• 2005

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2011.06a
• /
• pp.1013-1014
• /
• 2011

• Journal of Chest Surgery
• /
• v.37 no.12
• /
• pp.978-982
• /
• 2004

Background: Malignant pleural effusion is a common clinical problem in neoplastic patients. With the diagnosis of a malignant pleural effusion, palliative therapy was done. One of the treatments was a chemical pleurodesis. Talc was the most commonly used a sclerosing agent, but the quality of patient's life was not improved. We was evaluated by other agents such as Viscum album for relief of malignant pleural effusion. Material and Method: From November 2001 to October 2003, 17 patients who underwent to chemical pleurodesis for the malignant pleural effusion. We compared the talc (group I: 10 patients) and Viscum album (group II: 7 patients). We analysed them retrospectively in term of various factors and results. Result: There were no significant differences between group I and group II in the sex ratio, mean age, origin of primary cancer and site, but, group I had higher successful rate (80% : 71 %) than group II. Group II had better length of chest tube stay after procedure, Karnofsky performance and recurrence than group I. The failed treatement group was related to the pleural fluid pH and interval of initial chemical pleurodesis after thoracostomy. Conculsion: Although the chemical pleurodesis with Viscum album was slightly lower than talc in the successful rate, there was an alternative method instead of the chemical pleurodesis with talc to improve the patient's quality of life in malignant pleural effusion.