• Journal of Korean Society for Quality Management
• /
• v.41 no.1
• /
• pp.119-134
• /
• 2013

Purpose: The purpose of this paper is to show whether the results are changed with respect to the variance of the data, by analysis of data obtained from the Taguchi experimental techniques and general experiment. Because which cannot be prove by mathematical Formula, through experimental examples will show. Methods: Taguchi experiments were carried out with paper Helicopter experiment. Experimental Data are obtained by special designed Drop Test Equipment. While Experimental value arbitrarily changed, we looked at how Significant control Factor of Taguchi Methods and Factor experiments are changed. This process cannot be expressed as a Mathematical formula, but showed as a numerical example. Results: Saw significant changes in the factors when data is outside a certain range of the experimental data. By Test of Equivalence Variance, Experiment data is verified reliability. To find the Control Factor, Taguchi Method is better than the general experiment. Conclusion: We know that a Significant Factor is changed with the range of Variance of Experiment Data. The value of this paper is verified change process with Numerical Data obtained Experiment.

• IE interfaces
• /
• v.23 no.3
• /
• pp.257-263
• /
• 2010

Taguchi defined a good quality as 'A correspondence of product characteristic's expected value to the objective value satisfying the minimum variance condition.' For his good quality, he suggested Taguchi Method which is called Robust design which is irrelevant to the effect of these noise factors. Taguchi Method which has many success examples and which is used by many manufacturing industry. But Optimal solution of Taguchi Method is one among the experiments which is not optimal area of experiment point. On the other hand, Response Surface Method (RSM) which has advantage to find optimal solution area experiments points by approximate polynomial regression. But Optimal of RSM is depended on initial point and RSM can not use many factors because of a great many experiment. In this paper, we combine the Taguchi Method and the Response Surface Method with each advantage which is called Taguchi-RSM. Taguchi-RSM has two step, first step to find first solution by Taguchi Method, second step to find optimal solution by RSM with initial point as first step solution. We give example using catapults.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.7 no.3
• /
• pp.118-125
• /
• 1998

Chip control is a major problem in automatic machining process, especially in finish turning operation. In this case, chip breaker is one of the important factors to be determined. As unbroken chips are grown. these deteriorate the surface roughness. and proces automation can not be carried out. In this study to get rid of chip curling problem while turning internal hole. optimal chip breaker is selected from the experiment. The experiment is planned with Taguchi's method that is based on the orthogonal arrary of design factors. From the response table. cutting speed, feedrate, depth of cut and tool geometry turn to be major factors affecting chip formation. Then, optimal chip breaker is selected. and this is verified as good enough for chip control from the experiment.

• Korean Journal of Materials Research
• /
• v.5 no.1
• /
• pp.63-74
• /
• 1995

Process optimization experiments based on the Taguchi method were performed in order to set up the optimal process conditions for the contact oxide etching process module which was built in order to be attached to the cluster system of multi-processing purpose. From the two times experiments of Taguchi method, the overall behaviors of the etchmg characteristics depending upon the equipment parameters were understood at the 1st Taguchi experiment, the detail and optimal process conditions were extracted from the 2nd Taguchi experiment. As a final analysis of experimental results, the optimal etching characteristics were obtalned at the process conditions of $CHF_{3}/CF_{4}$ gas flow rate=72/8 sccm, chamber pressure=50 mTorr, RF power=300 Watts, magnetic field intensity=90 Gauss.

• 한국정보통신설비학회:학술대회논문집
• /
• 2009.08a
• /
• pp.289-292
• /
• 2009

In this paper, an optimum design center frequency proposes portable RFID reader antenna that is 920MHz frequency using the Taguchi's Method. Proposed antenna is cut corner of opposite angle and it's structure that have slots in four sides microstrip patch of a perfect square shape. This slot structure can miniaturize microstrip patch antenna and confirmed through an experiment that size of antenna about 18% decreases than structure that slot does not exist. Because compact antenna that have structure of slot changes according to complex design variables, analysis and experimental design for minimization of experiment number of times are required for optimum antenna design. In this research, designed antenna that have optimum structure when introduce and designs table of orthogonal arrays of the Taguchi's Method been experimental design that can minimize analysis and experiment number of times, achieve responsiveness analysis of main elements and analyzes the effect and minimizes design repeat with analysis result. Presented experiment result about antenna special quality that permittivity is 4.4 and manufactures to board of Epoxy 3.2T.

• Transactions of Materials Processing
• /
• v.19 no.3
• /
• pp.173-178
• /
• 2010

A die cast impeller blade has been developed in the effort on cost reduction in marine equipment industry. The purpose of this work is to optimize the die casting process using Taguchi's design of experiment for minimizing the internal defect of the die cast impeller blade. The experiments were preformed using the numerical simulation based on the L18 orthogonal array. As a results, the internal defect size of the die cast impeller blade for optimal design was controlled less than 1mm.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.553-556
• /
• 2003

End-milling have been used in the industrial world because it is very effective to the manufacture of mechanical parts with various shape. Recently the end-milling processing is needed the high-precise technique with good surface roughness and rapid time in aircraft, automobile part and molding industry. Therefore this study carried to decide the optimum cutting condition for surface roughness and rapid manufacturing time using design of experiment and ANOVA. From the results of experimentation, surface roughness have an effect on cutting direction, spindle speed and depth of cut. And then the optimum condition used Taguchi design is upward cutting in cutting direction, 600rpm in spindle speed, 240mm/min feed rate, 2mm in axial depth of cut and 0.25mm radial depth of cut. By using design of experiment, it is effectively represented shape characteristics of working surface in end-milling.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2005.09a
• /
• pp.147-152
• /
• 2005

In recent industry, according to pursuit the miniaturization and high-precision of machine part with development of new technology as IT, BT the development of mold manufacturing technology for mass production is accompanied. In this study, the spiral type injection mold with a $200{\mu}m$ thickness shape is made for investigation of influence for injection molding process variables and the flow length is measured through an experiment. Beside, the result of each experiment Is compared with the analysis result of CAE. Taguchi method is used in this experiment and the obtained data are analyzed using ANOVA method.

• Journal of Intelligence and Information Systems
• /
• v.7 no.2
• /
• pp.1-17
• /
• 2001

This paper deals with an agent-based decision-supporting system for Taguchi experiment planning. Among the four major parts of Taguchi experiment, the planning phase includes the most important decision-making issues such as determination of experiment objectives, quality characteristics, and control factors. The planning phase, however, has not been paid proper attention by experiment designers. In this research, an agent-based decision-supporting system for Taguchi experiment planning has been developed to facilitate the planning tasks of experiment designer. The decision-supporting system is composed of two agent-based mechanisms. The first employs an Internet agent that collects the domain knowledge from knowledge providers who may be distributed in remote places. Another agent then visualizes the collected knowledge and reports it to the experiment designer. Engineers who would normally have difficulties in collaborating because of limitations on their time or because they are in different places can easily work together in the same experiment team and brainstorm to make good decisions. The second agent-based mechanism offers context-sensitive advice generated by another intelligent agent during the experiment planning process. it prevents the experiment designer from making improper decisions, which will increase the feasibility of the experiment and minimize the unnecessary expense of time and resources.

• Proceedings of the Safety Management and Science Conference
• /
• 2000.05a
• /
• pp.265-273
• /
• 2000

A study to analyze and solve problems of polyacetal resin cutting experiment has presented in this paper. We have taken Taguchi's parameter design approach, specifically orthogonal array, and determined the optimal levels of the selected variables through analysis of the experimental results using S/H ratio.