• 한국재료학회지
• /
• 제8권10호
• /
• pp.961-968
• /
• 1998

상변화형 광디스크의 보호막으로 사용되는 $ZnS-SiO_2$ 유전체막을 RF magnetron 스퍼트링방법에 의하여 제조하는 경우에 기판 바이어스전압의 영향을 조사하기 위하여, 알곤가스 분위기에서 ZnS(80mol%)-$SiO_2$(20mol%)타겟을 사용하여 Si Wafer와 Corning flass 위에 박막을 증착시켰다. 본 실험에서는 여러 실험 변수를 효과적으로 조절하면서 실험의 양을 줄이고 도시의 산포를 동시에 만족시키는 최적조건으로 타겟 RF 출력 200W, 기판 RF 출력 20W, 아르곤 압력 5mTorr과 증착시간 20분을 얻을 수 있었으며, 신뢰구간 95%에서 확인실험을 수행하였다. 증착된 박막의 열적 저항성을 측정하기 위해 $300^{\circ}C$와 $600^{\circ}C$에서 열처리시험을 수행하였고, Spectroscopic Ellipsometry 측정을 통한 광학적 데이터를 바탕으로 Bruggeman EMA(Effective Medium Approximation)방법을 이용하여 기공(void)분률을 측정하였다. 본 연구결과에 의하면 특성치 굴절률에 대하여 기판 바이어스인자와 증착시간 사이에는 서로 교호작용이 강하게 존재함을 확인할 수 있었다. TEM분석과 XRD 분석 결과에 의하면 기판 바이어스를 가한 최적조건에서 증착된 미세조직은 기존의 바이어스를 가하지 않을 조건에서 증착시킨 박막보다 미세한 구조를 가지며, 또한 과도한 바이어스전압은 결정구조의 조대화를 야기시켰다. 그리고 적절한 바이어스전압은 박막의 밀도를 증가시키며, 기공분률을 약 3.7%정도 감소시킴을 확인할 수 있었다.

• Restorative Dentistry and Endodontics
• /
• 제36권4호
• /
• pp.313-323
• /
• 2011

연구목적: 여러 가지 문제점을 가지고 있는 기존의 중합개시제인 CQ와 새로운 개시제인 p-octyloxy-phenyl-phenyl iodonium hexafluoroantimonate (OPPI), 중합촉진제인 지방족 아민(DMAEMA)을 포함한 3종 중합개시시스템을 함유한 레진 모노머의 중합전환률을 증진시키기 위한 각각의 조성 비율을 알아보고 중합개시제와 중합촉진제의 비율에 따른 영향을 분석하고자 하였다. 연구 재료 및 방법: BisGMA/BisEMA/TEGDMA 조성의 레진 모노머를 제조한 다음 다양한 농도 조합의 CQ, OPPI, DMAEMA를 혼합하였다. 각각의 물질을 0.2 wt.% (저농도, L), 1.0 wt.% (중간농도, M), 2.0 wt.% (고농도, H)의 3가지 농도로 혼합하였으며, 그 농도 비율에 따라 9개의 실험군으로 제작하였다: LLL, LMM, LHH, MLM, MMH, MHL, HLH, HML, HHM (CQ-OPPI-DMAEMA의 농도) 중합 시스템이 함유된 각각의 레진 모노머를 NaCl disk에 압착한 다음 Demetron 400 광중합기를 이용하여 5초, 20초, 40초, 60초, 300초 동안 광중합 하였으며, FTIR로 전환률(Degree of Conversion, DC)을 측정하였다. 조성비율은 ANOVA와 Duncan 사후검정법을 이용하였으며 중합개시제와 중합촉진제의 비율이 같은 실험군들의 상호비교에는 T-검정도 시행하였다. 결과: 중합개시시스템을 이루는 조성들의 농도 조합에 따라 중합전환률의 차이를 보였으며, MMH 군과 HHM 군이 높은 초기 중합전환률을 보였다. 중합개시제(CQ, OPPI)와 중합촉진제인 DMAEMA의 비율에 따른 중합전환률의 차이를 보이지 않았으며, CQ의 농도는 전환률에 영향을 주지 않은 반면, OPPI의 농도는 전환률에 영향을 미쳤다. 결론: 중합전환률이 높으며 밝은 색상이 필요한 경우에는 MMH 조합을, 짙거나 불투명한 경우에는 MMH 조합이 추천된다.

• 한국표면공학회지
• /
• 제39권4호
• /
• pp.179-189
• /
• 2006

High velocity oxygen fuel(HVOF) thermal spray coating of WC-Co powder is one of the most promising candidate for the replacement of the traditional hard chrome plating and ceramics coating because of the environmental problem of the very toxic $Cr^{6+}$ known as carcinogen and the brittleness of ceramics coating. WC-Co micron and nano powder were coated by HVOF thermal spraying method for the study of durability improvement of the high speed spindle. Coatings were planned by Taguchi program for the four spray parameters of spray distance, flow rates of hydrogen, oxygen and powder feed rate. Optimal coating process was obtained by the studies of coating properties such as porosity, surface roughness, micro hardness, and micro structure. WC-Co micron and nano powder were coated on the Inconel 718 substrate by the optimal coating process obtained in this study. The wear behaviors were studied by the sliding wear tester at room temperature and at an elevated temperature of $500^{\circ}C$ for the application to high speed spindle. Sliding wear test was carried out for four most promising hard coatings of chrome coating, ceramics coatings such as $A1_2O_3,\;Cr_2O_3$ and HVOF Co-alloy T800 for the comparison of their wear behaviors. HVOF WC-Co coating was better than other coatings showing highest micro hardness of 1400 Hv and comparable friction coefficients with others. HVOF WC-Co coating is a strong candidate for the replacement of the traditional hard chrome plating for the high speed spindle.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2009년도 제38회 동계학술대회 초록집
• /
• pp.44-45
• /
• 2010

We are currently conducting studies on culturing and biocompatibility assessment of various cells such as neural stem cells and induced pluripotent stem cells(IPS cells) on carbon nanotube (CNT), on nerve regeneration electrodes, and on silicon wafers with a focus on developing nerve integrated CNT based bio devices for interfacing with living organisms, in order to develop brain-machine interfaces (BMI). In addition, we are carried out the chemical modification of carbon nanotube (mainly SWCNTs)-based bio-nanosensors by the plasma ion irradiation (plasma activation) method, and provide a characteristic evaluation of a bio-nanosensor using bovine serum albumin (BSA)/anti-BSA binding and oligonucleotide hybridization. On the other hand, the researches in the case of "novel plasma" have been widely conducted in the fields of chemistry, solid physics, and nanomaterial science. From the above-mentioned background, we are conducting basic experiments on direct irradiation of body tissues and cells using a micro-spot atmospheric pressure plasma source. The device is a coaxial structure having a tungsten wire installed inside a glass capillary, and a grounded ring electrode wrapped on the outside. The conditions of plasma generation are as follows: applied voltage: 5-9 kV, frequency: 1-3 kHz, helium (He) gas flow: 1-1.5 L/min, and plasma irradiation time: 1-300 sec. The experiment was conducted by preparing a culture medium containing mouse fibroblasts (NIH3T3) on a culture dish. A culture dish irradiated with plasma was introduced into a $CO_2$-incubator. The small animals used in the experiment involving plasma irradiation into living tissue were rat, rabbit, and pick and are deeply anesthetized with the gas anesthesia. According to the dependency of cell numbers against the plasma irradiation time, when only He gas was flowed, the growth of cells was inhibited as the floatation of cells caused by gas agitation inside the culture was promoted. On the other hand, there was no floatation of cells and healthy growth was observed when plasma was irradiated. Furthermore, in an experiment testing the effects of plasma irradiation on rats that were artificially given burn wounds, no evidence of electric shock injuries was found in the irradiated areas. In fact, the observed evidence of healing and improvements of the burn wounds suggested the presence of healing effects due to the growth factors in the tissues. Therefore, it appears that the interaction due to ion/radicalcollisions causes a substantial effect on the proliferation of growth factors such as epidermal growth factor (EGF), nerve growth factor (NGF), and transforming growth factor (TGF) that are present in the cells.

• 한국재료학회지
• /
• 제9권12호
• /
• pp.1245-1251
• /
• 1999

상변화형 광디스크는 직접 반복기록에 의한 고속기록, 고밀도화가 가능하고 높은 전송속도, 재생신호의 C/N (carrier to noise) 비가 좋은 장점을 가지고 있으나 반복되는 열에너지에 의한 디스크의 변형과 소거도의 저하, 기록 반복성의 저하가 문제가 된다. 이러한 반복성의 저하를 개선하기 위해 적절한 디스크의 구조와 기록막의 상하부에 유전체 보호막인 ZnS-$SiO_2$ 박막층을 삽입하였다. 박막 제조시 많은 실험변수의 제어를 위해 다꾸찌 방법을 통하여 타겟 R.F. Power 200W, 기판 R.F. Power 20W, 아르곤 압력 4mTorr, 전극거리 6cm의 최적조건을 얻을수 있었다. TEM과 XRD분석 결과, 전극거리가 가까워질수록 높은 증착속도로 인하여 미세한 조직구조를 가지고 있으며, 일정거리 이상 가까워지면 막의 morphology에 나쁜 영향을 끼침을 알 수 있었다. 이러한 막의 morphology의 영향으로 투과율이 감소하는 것을 확인할 수 있었다. AFM과 SEM분석에서는 전극거리가 가까워질수록 높은 증착속도로 인하여 morphology에 나쁜 영향을 끼치고 있음을 확인할 수 있었다. 최적조건에서 증착한 박막은 우수한 morphology를 가진 초미세구조의 치밀하고 결함이 없는 박막이었다. 이 박막은 상변화형 광디스크에서 열적 변형을 억제하고, 열전도를 감소시켜 우수한 유전체 보호피막의 역할을 할 수 있다. 그리고, 전극거리가 ZnS결정립의 크기와 증착속도, morphology에 미치는 영향에 대해 고찰하였다.

• 보건행정학회지
• /
• 제2권2호
• /
• pp.112-130
• /
• 1992

Patient care services are provided to individual patients in response to their health needs produced by illnesses or injuries. The services are often addressed to very serious conditions, and also they constitute the most expensive component of health care services. Therefore, the importance of quality is emphasized, but there are many indications that patient care quality is far from a satisfactory state in most of the countries. Based upon this observation, it is attempted to examine obstacles and approaches to quality improvement in patient care services. In doing so, following Taguchi's(1986) definition of product quality, quality of patient care services is conceived of as better when the less is the sociental loss attributalbe to variability of intended function and harmful side effects they emhibit after being delivered. Some distinguishing features of medical care sector pose difficulties in implementing effective quality improvement programs in patient care services. Nevertheless, newly proposed method of quality management, based on industrial quality management approach, seems to have a great deal of potential to effectively cope with such difficulties. This method, unlike the traditional approach to quality assurance, focuses on total organisational processes, not individuals, as the obproach to quality assurance, focuses on total organizational processes, not individuals, as the objects of quality improvement; variation, not comparison with standards, in quality measurement; and continuous improvement, not removing only bad quality care, as an ideal. Prerequisite to a successful use of any quality mangement method is motivating providers to improve quality. Conceivable approaches for such motivation are self-regulation, external controls and promotion of competition. Since these approaches are not mutually exclusive, they may be employed in an appropriate combination. In Korea, medical care providers are now functioning under the circumstances where they have little reason for making efforts to improve quality of their services. Once these circumstantial conditions are changed to exert pressures on providers to improve quality, the use of adequate quality management method becomes an issue. In this connection, much attention shoould be directed to the newly proposed method described above. In all these efforts for improving quality of patient care services, health insurance would be able to play a pivotal role. Poviders of medical care, buth indiciduals and organizations, are usually very responsive to the measures that affect their financing, and thus health insurance can be a strong instrument for motivationg providers to improve quality. Also, the insurance continuously acquires data on patient care, which could be processed to produce information required to effective quality control.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2008년 영문 학술대회
• /
• pp.671-679
• /
• 2008

The effect of Pre-cooled Turbojet Engine installation and nozzle exhaust jet on Hypersonic Turbojet EXperimental aircraft(HYTEX aircraft) were investigated by three-dimensional numerical analyses to obtain aerodynamic characteristics of the aircraft during its in-flight condition. First, simulations of wind tunnel experiment using small scale model of the aircraft with and without the rectangular duct reproducing engine was performed at M=5.1 condition in order to validate the calculation code. Here, good agreements with experimental data were obtained regarding centerline wall pressures on the aircraft and aerodynamic coefficients of forces and moments acting on the aircraft. Next, full scale integrated analysis of the aircraft and the engine were conducted for flight Mach numbers of M=5.0, 4.0, 3.5, 3.0, and 2.0. Increasing the angle of attack $\alpha$ of the aircraft in M=5.0 flight increased the mass flow rate of the air captured at the intake due to pre-compression effect of the nose shockwave, also increasing the thrust obtained at the engine plug nozzle. Sufficient thrust for acceleration were obtained at $\alpha=3$ and 5 degrees. Increase of flight Mach number at $\alpha=0$ degrees resulted in decrease of mass flow rate captured at the engine intake, and thus decrease in thrust at the nozzle. The thrust was sufficient for acceleration at M=3.5 and lower cases. Lift force on the aircraft was increased by the integration of engine on the aircraft for all varying angles of attack or flight Mach numbers. However, the slope of lift increase when increasing flight Mach number showed decrease as flight Mach number reach to M=5.0, due to the separation shockwave at the upper surface of the aircraft. Pitch moment of the aircraft was not affected by the installation of the engines for all angles of attack at M=5.0 condition. In low Mach number cases at $\alpha=0$ degrees, installation of the engines increased the pitch moment compared to no engine configuration. Installation of the engines increased the frictional drag on the aircraft, and its percentage to the total drag ranged between 30-50% for varying angle of attack in M=5.0 flight.