• Elastomers and Composites
• /
• v.54 no.3
• /
• pp.241-246
• /
• 2019

Carbon master batch (CMB) rubber sheets, which are stored in stacks, are difficult to separate during reuse because of the adhesion between sheets caused by the stacked weight over time. To solve this problem, in the actual rubber product manufacturing process, various anti-tacking agents (solid powder or liquid surfactants) are applied to the sheet surface. In this study, the emulsion samples of zinc (Zn)-stearate/triethanolamine (TEA)-stearate mixtures were prepared using TEA-stearate as a surfactant, prepared using an industrially manufactured Zn-stearate powder, and their basic anti-tacking properties were studied. During the process of manufacturing emulsion, a heat treatment process and an auxiliary surfactant were introduced to improve the dispersion stability. Results showed that the heat-treated sample exhibited a significant improvement in terms of sedimentation, storage stability, and anti-tacking characteristics since the Zn-stearate particles were reduced to a smaller size by the heat-treatment than that of the original Zn-stearate powder.

• Magazine of the Korea Concrete Institute
• /
• v.9 no.2
• /
• pp.55-61
• /
• 1997

• Proceedings of the KIPE Conference
• /
• 2002.07a
• /
• pp.559-562
• /
• 2002

In the photovoltaic power system, it is required that we obtain as much as generated power as possible. This paper describes improved stand-alone photovoltaic system efficiency(SPVS) using the sun position tracker for the solar lighting lamp through the comparison test of the power efficiency between the tacking type and the non-tacking type one.

• Journal of Korea Game Society
• /
• v.5 no.1
• /
• pp.3-10
• /
• 2005

In this paper, we propose an infrared LED tacking system called IRED Gun, which is designed for the game gun interface. The conventional systems are practically restricted by physical environment and are not robust to the measurement variations. We suggest the IRED Gun system to solve theses problems. Unlike conventional systems, our tracking system uses three infrared LED lights attached on monitor. Since the coordinate calibration is designed to regulate the detected target coordinates, more accurate aim position is calculated, which enables a game player to interact with a game more reliably. The experimental results verify the feasibility and validity of the calibration method and the infrared LED tacking system.

• Proceedings of the KIEE Conference
• /
• 1999.07b
• /
• pp.649-652
• /
• 1999

In this paper, the design method of target tracking systems using the extended $H^{\infty}$ filter(EHF) is proposed. Usually, a Cartesian coordinate frame is tell suited to describe the target dynamics. However, the measurements made in radar-centered polar coordinates are expressed as nonlinear equations in Cartesian coordinates. Thus the tacking problem is concerned with the nonlinear estimation. The extended $H^{\infty}$ filter is able to deal with the problems arising in the target tacking systems such as the parameter uncertainty included inevitably in modeling physical systems mathematically, the unavailableness of the stochastic information about exogenous disturbances, and errors due to the linearization of measurement equations. We show the proposed filter is robuster than the extended Kalman filter(EKF) through a simple target tracking example.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.8 no.2
• /
• pp.456-463
• /
• 2004

Non-intrusive methods based on active remote IR illumination for eye tracking is important for many applications of vision-based man-machine interaction. One problem that has plagued those methods is their sensitivity to lighting condition change. This tends to significantly limit their scope of application. In this paper, we present a new real-time eye detection and tacking methodology that works under variable and realistic lighting conditions. Based on combining the bright-Pupil effect resulted from IR light and the conventional appearance-based object recognition technique, our method can robustly track eyes when the pupils ale not very bright due to significant external illumination interferences. The appearance model is incorporated in both eyes detection and tacking via the use of support vector machine and the mean shift tracking. Additional improvement is achieved from modifying the image acquisition apparatus including the illuminator and the camera.

• Journal of Fashion Business
• /
• v.5 no.2
• /
• pp.129-147
• /
• 2001

The purpose of this study is to survey and analyze domestic fashion education institution's program on apparel prototype and thereupon, address the problems and find their solutions, and thereby, provide for some basic data useful to improve the basic patterns of apparel and ultimately, help reinforce the professional and practical apparel design education. The results of this study can be summarized as follows; 1. 85.1% of the subjects finished graduate or higher courses. Almost all of the college and junior college teachers finished graduate or higher courses, while only 31.6% of those teaching at technical institutes finished graduate or higher courses. Such a finding suggests that colleges tend to employ their faculty members based on their academic background but that technical institutes value the practical ability of their faculty more. 2. As a result of surveying the types of basic patterns used by teachers, it was found that 72.3% of them were using two or more patterns. The basic pattern preferred most by our teachers was Japanese culture institute's type (71.3%), followed by the US FIT type (24.5%), Lim Won-Ja's type (22.3%), French ESMOD type (17.0%). 96.3% of our apparel design students were making their basic patterns as instructed by their teachers. 3. 67.0% of our students were using their conceived sizes for production of their basic patterns, 14.9% were referring to the ready-made sizes, 8.5% were relying on their teachers' individual experiences, and 9.6% were using their own cord sizes. In order to survey the difference between teachers' sizes (ready-made sizes or individual experienced ones) and business sizes used, the basic body measurements used for ready-made apparels were surveyed to be compared with the national standard body sizes set in 1997 for women aged between 18 and 24. As a result, it was found that the ready-made sizes used for apparel production prototypes than teachers' ones were nearer the national standard sizes. Such a finding suggests that it may well be necessary for teachers to be more connected with the apparel businesses and thereby, teach their students in a more realistic way with correct information. 4. 83.0% of the subject teachers were tacking their basic patterns to be well fitting, and 76.9% of these teachers were tacking the patterns in reference with students' individual body sizes. In all, 97.4% of the subject teachers were guiding the tacking process, which suggests that the flat patternmaking is taught primarily for customized apparels. As a result of comparing the fitness of basic patterns with those of each body part, it was found that teachers were most dissatisfied with the fitness of shoulders and arm hole depth. Therefore, it will be necessary to reclassify the body types or find other drawing techniques to improve the fitness of such body parts. Nevertheless, teachers were willing much (4.18) to develop their own educational basic patterns for themselves. Lastly, it is hoped that this study will be followed up by future studies on educational prototypes covering diverse body shapes and those on practical implementations of those prototypes for students.

• Proceedings of the Korean Information Science Society Conference
• /
• 1998.10a
• /
• pp.765-767
• /
• 1998

Many application in human computer interaction(HCI) require tacking a human face and facial features. In this paper we propose efficient parallel processing system for face tracking under heterogeneous networked. To track a face in the video image we use the skin color information and connected components. In terms of parallelism we choose the master-slave model which has thread for each processes, master and slaves, The threads are responsible for real computation in each process. By placing queues between the threads we give flexibility of data flowing

• Proceedings of the KSR Conference
• /
• 2011.05a
• /
• pp.1208-1213
• /
• 2011

The objective of this study is to analyze rut resistance and moisture susceptibility of warm mix asphalt(WMA) mixture. The deformation strength ($S_D$), which is known to have high correlations with the high-temperature deformation resistance of dense grade mixture, was used as a tool, together with wheel tacking (WT) test, for evaluating warm mix asphalt mixture's rut resistance.

• Proceedings of the Acoustical Society of Korea Conference
• /
• autumn
• /
• pp.467-470
• /
• 2004

잠수함 정숙화 추세와 복잡한 해양 환경으로 대잠수함전에서 미약한 표적신호를 지속적으로 탐지하기 매우 어려워지고 있어 소나 운용자가 장시간 지속적으로 전방위 표적 탐색하는 부담이 매우 크므로 표적 자동탐지 추적 기능이 필수적이다. 본 논문에서는 장거리 예인 수동소나에 적합한 표적의 자동 탐지 및 추적기법을 제안하고 시뮬레이션과 실제 해상 환경에서 수중 표적신호로 성능을 검증하였다.