• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.11 no.3
• /
• pp.62-67
• /
• 2012

To realize 2-dimensional vibrational micro cutting in milling and drilling, etc. where the tools rotate, it could be a promising way to vibrate a workpiece instead of a rotating tool itself. In this study, an excitation work-table was developed using two piezoelectric materials orthogonally arranged. The trochoidal trajectory of a cutting tool which is necessary for 2D vibrational cutting is enabled in the excitation condition of higher excitation frequency and larger amplitude of vibration and the cutting condition of smaller diameter of cutting tool and lower spindle speed. The various trochoidal trajectories of a cutting tool could be generated in the excitation work-table by adjusting the input voltages to two piezoelectric materials and the phase between the two voltages and the trajectories could be readily used for the 2D vibrational micro cutting.

• Journal of the Korean Society for Precision Engineering
• /
• v.29 no.3
• /
• pp.266-272
• /
• 2012

This paper has aims to share fundamental knowledge for magnetic abrasive polishing and to mainly introduce recent research results. In order to enhance a magnetic flux density for nonferrous materials, advanced magnetic abrasive polishing system which is called 2nd generation system was established by electro-magnet array table, and the effectiveness of the electromagnet array table was evaluated in real polishing experiments. To increase adhesiveness of the abrasives in high speed polishing, a silicone gel agent was proposed and carbon nanotube particles as new magnetic abrasives were applied in the magnetic abrasive polishing. In addition, a strategy for optimal step-over determination by heuristic algorithm was introduced for applying large size workpiece. Curved surfaces having a uniform radius were simulated and tested with installed electro-magnet array table.

• Korean Journal of Optics and Photonics
• /
• v.8 no.3
• /
• pp.194-198
• /
• 1997

We realized CGH display of moving objects with an optical addressed spatial light modulator. CGH was calculated by the horizontal parallex method for saving a calculating time, and calculation speed was improved by making a lookup table of trigonometric function and root calculation. This lookup table was applied to a low resolution SLM, and succeeded in a simultaneous display of the three hologram images by the scanning method.

• Language and Information
• /
• v.7 no.2
• /
• pp.81-101
• /
• 2003

This paper introduces a computerized version of the Korean Standard Pronunciation Rules that can be used in speech engineering systems such as Korean speech synthesis and recognition systems. For this purpose, we build Petri net models for each item of the Standard Pronunciation Rules, and then integrate them into the sound conversion table. The reversion of the Korean Standard Pronunciation Rules regulates the way of matching sounds into grammatically correct written characters. This paper presents not only the sound conversion table but also the character conversion table obtained by reversely converting the sound conversion table. Malting use of these tables, we have implemented a Korean character into a sound system and a Korean sound into the character conversion system, and tested them with various data sets reflecting all the items of the Standard Pronunciation Rules to verify the soundness and completeness of our tables. The test results show that the tables improve the process speed in addition to the soundness and completeness.

• Journal of Communications and Networks
• /
• v.13 no.4
• /
• pp.408-417
• /
• 2011

The stringent performance requirement for the high efficiency of routing protocols on the Internet can be satisfied by exploiting the threaded border gateway protocol (TBGP) on multi-cores, but the state-of-the-art TBGP performance is restricted by a mass of contentions when racing to access the routing table. To this end, the highly-efficient parallel access approach appears to be a promising solution to achieve ultra-high route processing speed. This study proposes a general routing table structure consisting of two-level tries for fast parallel access, and it presents a heuristic-based divide-and-recombine algorithm to solve a mass of contentions, thereby accelerating the parallel route updates of multi-threading and boosting the TBGP performance. As a projected TBGP, this study also modifies the table operations such as insert and lookup, and validates their correctness according to the behaviors of the traditional routing table. Our evaluations on a dual quad-core Xeon server show that the parallel access contentions decrease sharply by 92.5% versus the traditional routing table, and the maximal update time of a thread is reduced by 56.8 % on average with little overhead. The convergence time of update messages are improved by 49.7%.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 1996.10a
• /
• pp.198-207
• /
• 1996

Electro sensitive traffic system can't consider passenger car unit, so, it causes start up delay time and passenger waiting time. In this paper, it antecedently creates optimal traffic cycle of passenger car unit at the bottom traffic intersection. But, sometimes it can make mistakes due to changes in car weight, car speed, and control of feed-back data. Moreover, to prevent spillback, it can adapt control even though upper traffic intersection has a different saturation rate, road length, road slope and road width.

• Journal of Mechanical Science and Technology
• /
• v.17 no.6
• /
• pp.896-905
• /
• 2003

A linear motor has many advantages next to conventional feed mechanisms: high transitional speed and acceleration, high control performance, and good positioning accuracy at high speed. Through the omission of a power transfer element, the linear motor shows no wear and no backlash, has a long lifetime, and is easy to assemble. A disadvantage of the linear motor is low efficiency and resultant high-temperature rise in itself and neighboring structures during operation. This paper presents the thermal behavior of the linear motor as a feed mechanism in machine tools. To improve the thermal behavior, an insulation layer is used. By placing the insulation layer between the primary part and the machine table, both the temperature difference and the temperature fluctuation in the machine table due to a varying motor load are reduced.

• Proceedings of the IEEK Conference
• /
• 2000.11a
• /
• pp.213-216
• /
• 2000

In this paper, we propose a new scheme which improves the IP address lookup time. The new scheme is composed of two core technologies, named the prefix alignment and the prefix distance ordering. Now, as the Internet is being used commonly by improving the data transmission capacity, the need for enlarging the bandwidth of the Internet is on the rise. IP address lookup performance problem is an important obstacle in the router executing high speed packet forwarding. This results from the fact that the prefixes routing table is composed of and the traffic being processed in unit time are largely on the increase. The proposed lookup scheme is divided into two parts in technology, the one is the algorithm forming a routing database(routing table), the other is the lookup procedure in the actual packet processing.

• Journal of the Society of Naval Architects of Korea
• /
• v.30 no.4
• /
• pp.17-22
• /
• 1993

The intersection problem of three-dimensional free form surfaces can be solved by geometrical and numerical methods. Up to now, the subdivision technique, which is classified under the former, has been largely employed to find the cross section of ship hull form. In this paper, an algorithm is presented for intersecting ship hull form in high speed. The high speed calculation algorithm is based on simple numerical methods, such as the secant method, false position method and bisection method. The algorithm is directly applicable to depicting arbitrary ship cross sections, drawing ship lines and constructing the offset table.

• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.5
• /
• pp.131-136
• /
• 2000

This paper is concerned with the surface roughness and the bending strength of ground workpiece in ZrO2 ceramic grinding. Surface roughness was measured with surface tracer and bending strength value was obtained by three-point bending test on machining center using tool dynamometer. Grinding experiments were carried out to examine the effects of grinding conditions including diamond mesh size, table speed, and depth of cut on ground surface roughness. The correlation between surface roughness and bending strength was also inspected. The experimental results indicate that the rougher surface is produced as the mesh size of diamond wheel is reduced and table speed is increased, but surface roughness is not affected by depth of cut. The values of bending strength decrease as the values of Ra, Rmax and Ku increase.