• 제목/요약/키워드: Table height

검색결과 288건 처리시간 0.023초

Scalable Blockchain Storage Model Based on DHT and IPFS

  • Chen, Lu;Zhang, Xin;Sun, Zhixin
    • KSII Transactions on Internet and Information Systems (TIIS)
    • /
    • 제16권7호
    • /
    • pp.2286-2304
    • /
    • 2022
  • Blockchain is a distributed ledger that combines technologies such as cryptography, consensus mechanism, peer-to-peer transmission, and time stamping. The rapid development of blockchain has attracted attention from all walks of life, but storage scalability issues have hindered the application of blockchain. In this paper, a scalable blockchain storage model based on Distributed Hash Table (DHT) and the InterPlanetary File System (IPFS) was proposed. This paper introduces the current research status of the scalable blockchain storage model, as well as the basic principles of DHT and the InterPlanetary File System. The model construction and workflow are explained in detail. At the same time, the DHT network construction mechanism, block heat identification mechanism, new node initialization mechanism, and block data read and write mechanism in the model are described in detail. Experimental results show that this model can reduce the storage burden of nodes, and at the same time, the blockchain network can accommodate more local blocks under the same block height.

An investigation into adequacy of separation gap to preclude earthquake-induced pounding

  • Yazan Jaradat;Pejman Sobhi and Harry Far
    • Structural Engineering and Mechanics
    • /
    • 제86권1호
    • /
    • pp.29-48
    • /
    • 2023
  • Pounding happens when contiguous structures with differing heights vibrate out of line caused by a seismic activity. The situation is aggravated due to the insufficient separation gap between the structures which can lead to the crashing of the buildings or total collapse of an edifice. Countries around the world have compiled building standards to address the pounding issue. One of the strategies recommended is the introduction of the separation gap between structures. AS1170.4-2007 is an Australian standard that requires 1% of the building height as a minimum separation gap between buildings to preclude pounding. This article presents experimental and numerical tests to determine the adequacy of this specification to prevent the occurrence of seismic pounding between steel frame structures under near-field and far-field earthquakes. The results indicated that the recommended minimum separation gap based on the Australian Standard is inaccurate if low-rise structure in a coupled case is utilised under both near and far field earthquakes. The standard is adequate if a tall building is involved but only when a far-field earthquake happens. The research likewise presents results derived by using the ABS and SRSS methods.

인터벤션에서 Calibration Mode에 대한 오차율 비교 (Comparison on the Error Rates of Calibration Modes in Intervention)

  • 공창기;류영환
    • 한국방사선학회논문지
    • /
    • 제14권5호
    • /
    • pp.619-626
    • /
    • 2020
  • 이 연구의 목적은 경피적 혈관내 풍선 확장술이나 스텐트 삽입술에서 Balloon이나 Stent의 직경 및 길이를 예측 할 때 사용되는 정량적인 평가 도구인 Calibration Mode중 Catheter Calibration Mode, Auto Calibration Mode 그리고 Segment Calibration Mode에서의 오차율에 대해 알아보고자 하였다. Calibration의 정량적인 평가를 위해 정교하게 제작된 직경 × 길이(2 mm × 80 mm) Copper Wire와 5, 10, 15, 30, 40 mm의 Metal Ball을 이용하여 실험하였고, 아크릴 팬텀은 25 mm, 50 mm, 75mm, 100 mm, 125 mm, 150mm, 175 mm, 200 mm로 하여 각각의 높이에서 혈관조영 촬영장치로 Subtraction 영상을 획득하여 장비 회사에서 제공하는 소프트웨어인 Stenosis Analysis Tools을 이용하여 측정하였다. Catheter Calibration Mode에서의 오차율을 평가하기 위한 방법으로 Copper Wire를 각각의 아크릴 팬텀위에 올려놓고 촬영하였으며, Copper Wire 직경 2 mm를 Catheter의 직경으로 Setting하였고, 길이 8 mm Copper Wire의 길이를 Multi-segments로 측정하여 분석한 결과 1.13 ~ 5.63%의 오차율이 나타났다. Auto Calibration Mode에서의 오차율을 평가하기 위한 방법으로 각각의 아크릴 팬텀을 높이에서 아크릴 높이에 대한 수치를 입력하고, 8 mm Copper Wire의 길이를 Multi-segments 측정하여 분석한 결과 0 ~ 0.26%의 오차율이 나타났다. Segment Calibration Mode에서의 오차율을 평가하기 위한 방법으로 테이블 바닥에 있는 각각의 Metal Ball을 각각 Calibration하고, 각각의 아크릴 팬텀 위에 올려 있는 8 mm Copper Wire의 길이를 측정하여 아크릴 팬텀 높이 변화에 대한 8 mm Copper Wire 길이를 Mutli-segments 측정하여 분석한 결과 1.05 ~ 19.04%의 오차율이 나타났다. 그리고 Auto Calibration Mode에서 OID 변화에 대한 실험은 아크릴 팬텀의 높이는 100mm로 고정하고 OID만 450 mm ~ 600 mm로 변화를 하였을때 오차율은 0.13 ~ 0.38%로 나타났다. 결론적으로 소프트웨어에서 제공하는 정량적인 혈관의 치수평가를 하기 위한 이들 Calibration Mode 중 Auto Calibration Mode에서 높이 값을 입력하는 것이 오차율이 가장 적은 Calibration 방법임을 확인하였으며, Metal ball이나 기타 다른 물체를 이용하여 Calibration을 하기 위해서는 시술부위와 동등한 높이에 놓고 Calibration을 하는 방법이 오차율을 가장 줄일 수 있는 방법으로 사료된다.

Poa pratensis L. 에서 유기질 토양개량재 및 수분 중합체가 잔디생육에 미치는 효과 (Effect of Soil Organic Amendment and Water-Absorbing Polymer on Growth Characteristics in Poa pratensis L.)

  • 김경남
    • 아시안잔디학회지
    • /
    • 제23권2호
    • /
    • pp.317-330
    • /
    • 2009
  • 본 실험을 통해 고품질 켄터키 블루그래스에서 유기질개량재 및 중합체 혼합율에 따라 잔디생존력, 지상부 생장, 초장 및 잔디품질은 유의한 차이가 나타났으며 그 결과는 다음과 같았다(Table 5). 1. 켄터키 블루그래스의 발아율은 혼합 처리구에 따라 최소 0%~최대 56.3% 사이로 다양하게 나타났다. 최고 발아율 56.3%는 SOA 20% 및 중합체 0% 혼합된 처리구 13(SOA 20%+sand 80%+polymer 0%)에서 나타났다. 잔디생존력에서 유기질개량재 효과는 SOA 10% 및 20% 처리구가 SOA 100% 보다 더 양호하였다. 잔디발아 측면에서 중합체 혼합비율은 낮을수록 바람직하였으며, 특히 중합체 3% 이상은 발아에 불리한 영향을 주는 것으로 판단되었다. 2. 지상부 엽생장의 생장지표인 전체엽수는 켄터키 블루그래스에서 2.2~4.0엽 사이였고, 유기질개량재 SOA 효과는 SOA 20% > SOA 100% > SOA 10% 순서로 나타났다. 그리고 잔디엽수 생장을 고려 시 중합체 혼합비율은 12% 이하가 적절하였다. 3. 초장에서 유기질개량재 SOA 효과는 SOA 20% > SOA 10% > SOA 100% 순서로 나타났으며, 중합체 혼합 시 처리구 14(SOA 20%+sand 80%+polymer 3%)를 제외하고는 3~15% 사이에서 잔디 초장 차이는 없었다. 4. 잔디밀도는 파종 후 생장이 진행됨에 따라 증가하는 경향이었지만, 유기질개량재 SOA 및 중합체 혼합비율에 따라 차이가 있었다. 켄터키 블루그래스에서 유기질개량재 SOA 효과는 SOA 10% 및 20% 혼합구가 SOA 100% 에 비해 좀더 양호하게 나타났다. 5. 향후 유기질 토양개량재 및 모래 혼합구에서 중합체 K-36의 구성요소인 K-SAM, Ca, perlite, Kitosan 등 개별 요인에 대한 추가 생육검정을 통해 이들 소재를 이용한 토양개량재의 개발 및 실무적용에 활용하는 것이 바람직하다고 사료되었다. 6. 본 실험에서 켄터키 블루그래스의 엽수는 정상적인 엽수보다 1엽 정도 적은 2.5~4.0엽으로 나타났는데, 향후 토심이 좀 더 깊은 포트 또는 포장에서 실험하는 것이 필요하다고 판단되었다. 7. 또한 수분 흡수 중합체는 식물 생장에 유용한 것으로 알려져 있지만, 잔디밭에서 파종 후 발아과정에 필요한 수분을 흡수 및 저장함으로 초기 생육 단계에서는 불리할 수도 있다. 따라서 이들 구성요소 및 조합비율에 대한 조정과 함께 종자파종 잔디밭과 함께 뗏장 이식 후 잔디밭에서 비교검토 하는 것도 장기적으로 필요하다고 판단되었다.

치과위생사의 요통 발생에 관한 연구 (Occurrence of Low Back Pains for Dental Hygienists)

  • 이숙정
    • 한국치위생학회지
    • /
    • 제4권2호
    • /
    • pp.265-276
    • /
    • 2004
  • The purpose of this study,was to find out health status, characteristics related to working conditions, occurrence of low back pain and its related factors among dental hygienists working in dental clinics, and, thus, to provide basic information necessary to set up some plans for preventing the occurrence of low back pains and improving working conditions for dental hygienists. The data were collected from 310 dental hygienists working at dental clinics in Pusan and Kyungnam area, including Masan, Changwon, Jinhae and Jinju, with a self-administered questionnaire and were analyzed finally for 295 records with SPSS for Windows(7.52K) program. The results were as follows : Working condition was considered to be fair by 562% of dental hygienists were thought to threaten their health in the dental clinics. About seventy percent of dental hygienists worked over ten hours a day and 72.8% were standing while working over 7 hours, 65% considered working hours too long. Health status was thought be more than average for 82.3% while more than half perceived certain degree of stress frequently. The rate of complaining low back pains among dental hygienists was 87.8% with pains more than medium level for 39.3%. The variables significantly related to the degree of low back pains were height, uncomfortable postures, type of working postures and the height of working table, while some variables including height, hours of working on the feet, the presence of hazardous work environment, uncomfortable postures, the presence of hazardous works, the amount of working hours, type of working postures and work-associated stresses, were significantly related to the number of symptoms for low back pains. Multiple regression analysis showed that occurrence of low back pains was significantly influenced by 5 factors such as subjective status of health, work-related stresses, the degree of perception to work environment, the degree of perception to the amount of working hours and age. In conclusion, it might be necessary to manage working conditions effectively by reducing working hours, making good postures while working and removing stressful conditions in order to reduce risk factors for the occurrence of low back pains among dental hygienists. Therefore good working postures, assignment of appropriate rest time and some programs for early detection, care and education of low back pains should be provided for the dental hygienists.

  • PDF

모형시험을 통한 비압력 지중관거 균열로 인한 지반함몰 메커니즘 연구 (An investigation on the ground collapse mechanism induced by cracks in a non-pressurized buried pipe through model tests)

  • 김용기;남규태;김호종;신종호
    • 한국터널지하공간학회 논문집
    • /
    • 제20권2호
    • /
    • pp.235-253
    • /
    • 2018
  • 지하관거 균열로 인한 지하수의 흐름은 주변 지반의 토사유실을 야기하여 관거 인접 지반에서의 공동발생, 나아가 지반함몰(싱크홀) 원인이 된다. 본 연구는 관거의 균열을 모사하는 모형시험을 통해 비점착성 지반에 위치한 지중 비압력 관거의 균열로부터 비롯되는 지반함몰 메커니즘과 이로 인한 파괴모드를 조사하였다. 토사유실 및 함몰 영향인자로서 균열크기, 관거유속, 지하수위, 토피고 그리고 지반구성재료 등을 채택하여 이들 인자들이 함몰거동에 미치는 영향을 조사하였다. 각 인자들에 따른 지반파괴의 형상(파괴모드)과 지반유실량을 분석한 결과, 토피고와 지하수위가 일치하는 경우 최종파괴모드는 침식각이 불연속적으로 변화하는 'Y'형으로 관찰되며, 지하수위가 더 높게 위치하는 경우 침식각이 일정한 파괴면 형상인 'V'형으로 나타난다. 토피고가 증가하는 경우의 파괴형상에서 토피고 영향에 무관한 길이와 토피고에 따라 점진적으로 증가하는 폭을 갖는 수직함몰구간이 형성되는 결과를 얻었다.

Eco Resort Wear Sizing System Targeting Jeju's Medical Tourists

  • Kwon, Sookhee;Hong, Jiun
    • 대한인간공학회지
    • /
    • 제31권6호
    • /
    • pp.765-772
    • /
    • 2012
  • Objective: The purpose of this research was to aid creating an effective sizing system for the vacation wear intended for Jeju's medical tourists, specifically females from the major countries including the USA, Japan, and Korea. Background: Medical tourism makes the gains of every year 40,000,000,000 dollar, every year 30% it is increasing. Thus the Jeju-do is propelling medical tourism. The body size each country is different. Consequently must set the body size standard for the women. Method: (1) It observed the body size of the Korean women of 2004 years and 2010 years. (2) It analyzed the body size of the women of the USA, China, Japan and Korea. (3) It set the sizing system of the women of the USA(ASTM), China (GB), Japan(JIS) and Korea(KS). Results: Korean adult females' height in 2010 has increased from 2004. The Waist Back Length, Waist Front Length, Arm Length etc has also increased along with the Height. The upper body has become slimmer at the same time; the Chest Circumference, Bust Circumference, and Underbust Circumference have decreased. The lower body on the other hand has become bigger: the Waist Circumference and Hip Circumference have increased. The BMI has decreased by 0.4 from 2004 - the Height has increased while Weight has decreased. The Chest Circumference and Under Bust Circumference of Korean women across all age groups have increased at a proportional rate to other parts of body; however, the rate of increase in Chest Circumference was far greater. American females(Caucasians) had the greatest ratio of waist to bust (Waist Circumference/Chest Circumference), smallest ratio of Neck Base Circumference to Bust Circumference (neck/bust). Korean females had smallest ratio of Waist Circumference to Underbust Circumference(waist/bust). As for the drop of Chest Circumference and Waist Circumference, American females had the highest and Koreans had the lowest. As for the drop of Hip Circumference and Chest Circumference, Japanese had the highest and Americans had the lowest, but Japanese women at the same time showed the A line body shapes. As for difference of Chest Circumference and Underbust Circumference, American females had the biggest(13.73) followed by Korean(11.1), Japanese(10.9) and Chinese(10.5). Conclusion: The women of the USA, China, Japan and Korea body size is different. Especially the value of the Bust Circumference - the Underbust Circumference is different. Thus, it set the sizing system(Table 8).

삼나무 임분수확량 평가 및 예측 (Assessment and Prediction of Stand Yield in Cryptomeria japonica Stands)

  • 손영모;강진택;황정순;박현;이광수
    • 한국산림과학회지
    • /
    • 제104권3호
    • /
    • pp.421-426
    • /
    • 2015
  • 본 연구는 우리나라 삼나무의 생장 및 수확량 평가와 탄소저장 및 흡수량을 알아보기 위하여 수행되었다. 조사구는 전남, 경남 및 제주지역에 정상적으로 생육하는 삼나무 집단지에서 총 106개 표준지를 선정(이상치를 제외한 92개소 이용)하였다. 그리고 분석을 위하여 Weibull 직경분포 모델을 적용시켰다. 직경분포 추정을 위하여 흉고직경, 흉고단면적, 수고 등 생장인자별 생장 추정식을 도출하고, 이들에 대한 적합성을 검증하였다. 그리고 삼나무에 대한 지역별 임지생산력을 파악할 수 있는 지위지수를 Schumacher 모델로서 개발하였으며, 지위지수 추정의 기준임령은 30년으로 정하였다. 우리나라 삼나무의 지위지수 범위는 10~16에 있는 것으로 나타났으며, 이를 기준으로 임분수확표를 조제하였다. 임분수확표 지위 14에 의하면, 25년생일 때 연평균생장량(MAI)이 $7.6m^3/ha$인 것으로 나타나며, 임목축적 $190.1m^3/ha$이 될 것으로 예측되었다. 이는 편백보다 $20m^3$ 정도 높은 값이었다. 그리고 삼나무의 연간 탄소흡수량은 임령 25년에 2.14 tC/ha/yr, $7.83tCO_2/ha/yr$으로 최대값을 갖는 것으로 나타났다. 이를 타 침엽수와 비교해 보면, 편백($7.5tCO_2/ha/yr$)보다는 약간 높은 수준이나, 잣나무 $10.4tCO_2/ha/yr$, 낙엽송 $11.2tCO_2/ha/yr$ 보다는 낮은 수치였다. 이러한 연구결과를 기반으로 삼나무의 생장 정보 활용 뿐만아니라 목재로서의 이용을 제고할 수 있는 방안 마련이 필요하다고 사료된다.

논벼 장.단간품종의 증발산제계수와 건물량과의 관계에 대한 연구(I) (Studies on Relations between Various Coeffcients of Evapo-Transpiration and Quantities of Dry Matters for Tall-and Short Statured Varieties of Paddy Rice)

  • 류한열;김철기
    • 한국농공학회지
    • /
    • 제16권2호
    • /
    • pp.3361-3394
    • /
    • 1974
  • The purpose of this thesis is to disclose some characteristics of water consumption in relation to the quantities of dry matters through the growing period for two statured varieties of paddy rice which are a tall statured variety and a short one, including the water consumption during seedling period, and to find out the various coefficients of evapotranspiration that are applicable for the water use of an expected yield of the two varieties. PAL-TAL, a tall statured variety, and TONG-lL, a short statured variety were chosen for this investigation. Experiments were performed in two consecutive periods, a seedling period and a paddy field period, In the investigation of seedling period, rectangular galvanized iron evapotranspirometers (91cm${\times}$85cm${\times}$65cm) were set up in a way of two levels (PAL-TAL and TONG-lL varieties) with two replications. A standard fertilization method was applied to all plots. In the experiment of paddy field period, evapotanspiration and evaporation were measured separately. For PAL-TAL variety, the evapotranspiration measurements of 43 plots of rectangular galvanized iron evapotranspirometer (91cm${\times}$85cm${\times}$65cm) and the evaporation measurements of 25 plots of rectangular galvanized iron evaporimeter (91cm${\times}$85cm${\times}$15cm) have been taken for seven years (1966 through 1972), and for TONG-IL variety, the evapotranspiration measurements of 19 plots and the evaporation measurements of 12 plots have been collected for two years (1971 through 1972) with five different fertilization levels. The results obtained from this investigation are summarized as follows: 1. Seedling period 1) The pan evaporation and evapotranspiration during seedling period were proved to have a highly significant correlation to solar radiation, sun shine hours and relative humidity. But they had no significant correlation to average temperature, wind velocity and atmospheric pressure, and were appeared to be negatively correlative to average temperature and wind velocity, and positively correlative to the atmospheric pressure, in a certain period. There was the highest significant correlation between the evapotranspiration and the pan evaporation, beyond all other meteorological factors considered. 2) The evapotranpiration and its coefficient for PAL-TAL variety were 194.5mm and 0.94∼1.21(1.05 in average) respectively, while those for TONG-lL variety were 182.8mm and 0.90∼1.10(0.99 in average) respectively. This indicates that the evapotranspiration for TONG-IL variety was 6.2% less than that for PAL-TAL variety during a seedling period. 3) The evapotranspiration ratio (the ratio of the evapotranspiration to the weight of dry matters) during the seedling period was 599 in average for PAL-TAL variety and 643 for TONG-IL variety. Therefore the ratio for TONG-IL was larger by 44 than that for PAL-TAL variety. 4) The K-values of Blaney and Criddle formula for PAL-TAL variety were 0.78∼1.06 (0.92 in average) and for TONG-lL variety 0.75∼0.97 (0.86 in average). 5) The evapotranspiration coefficient and the K-value of B1aney and Criddle formular for both PAL-TAL and TONG-lL varieties showed a tendency to be increasing, but the evapotranspiration ratio decreasing, with the increase in the weight of dry matters. 2. Paddy field period 1) Correlation between the pan evaporation and the meteorological factors and that between the evapotranspiration and the meteorological factors during paddy field period were almost same as that in case of the seedling period (Ref. to table IV-4 and table IV-5). 2) The plant height, in the same level of the weight of dry matters, for PAL-TAL variety was much larger than that for TONG-IL variety, and also the number of tillers per hill for PAL-TAL variety showed a trend to be larger than that for TONG-IL variety from about 40 days after transplanting. 3) Although there was a tendency that peak of leaf-area-index for TONG-IL variety was a little retarded than that for PAL-TAL variety, it appeared about 60∼80 days after transplanting. The peaks of the evapotranspiration coefficient and the weight of dry matters at each growth stage were overlapped at about the same time and especially in the later stage of growth, the leaf-area-index, the evapotranspiration coefficient and the weight of dry matters for TONG-IL variety showed a tendency to be larger then those for PAL-TAL variety. 4) The evaporation coefficient at each growth stage for TONG-IL and PAL-TALvarieties was decreased and increased with the increase and decrease in the leaf-area-index, and the evaporation coefficient of TONG-IL variety had a little larger value than that of PAL-TAL variety. 5) Meteorological factors (especially pan evaporation) had a considerable influence to the evapotranspiration, the evaporation and the transpiration. Under the same meteorological conditions, the evapotranspiration (ET) showed a increasing logarithmic function of the weight of dry matters (x), while the evaporation (EV) a decreasing logarithmic function of the weight of dry matters; 800kg/10a x 2000kg/10a, ET=al+bl logl0x (bl>0) EV=a2+b2 log10x (a2>0 b2<0) At the base of the weight of total dry matters, the evapotranspiration and the evaporation for TONG-IL variety were larger as much as 0.3∼2.5% and 7.5∼8.3% respectively than those of PAL-TAL variety, while the transpiration for PAL-TAL variety was larger as much as 1.9∼2.4% than that for TONG-IL variety on the contrary. At the base of the weight of rough rices the evapotranspiration and the transpiration for TONG-IL variety were less as much as 3.5% and 8.l∼16.9% respectively than those for PAL-TAL variety and the evaporation for TONG-IL was much larger by 11.6∼14.8% than that for PAL-TAL variety. 6) The evapotranspiration coefficient, the evaporation coefficient and the transpiration coefficient and the transpiration coefficient were affected by the weight of dry matters much more than by the meteorological conditions. The evapotranspiratioa coefficient (ETC) and the evaporation coefficient (EVC) can be related to the weight of dry matters (x) by the following equations: 800kg/10a x 2000kg/10a, ETC=a3+b3 logl0x (b3>0) EVC=a4+b4 log10x (a4>0, b4>0) At the base of the weights of dry matters, 800kg/10a∼2000kg/10a, the evapotranspiration coefficients for TONG-IL variety were 0.968∼1.474 and those for PAL-TAL variety, 0.939∼1.470, the evaporation coefficients for TONG-IL variety were 0.504∼0.331 and those for PAL-TAL variety, 0.469∼0.308, and the transpiration coefficients for TONG-IL variety were 0.464∼1.143 and those for PAL-TAL variety, 0.470∼1.162. 7) The evapotranspiration ratio, the evaporation ratio (the ratio of the evaporation to the weight of dry matters) and the transpiration ratio were highly affected by the meteorological conditions. And under the same meteorological condition, both the evapotranspiration ratio (ETR) and the evaporation ratio (EVR) showed to be a decreasing logarithmic function of the weight of dry matters (x) as follows: 800kg/10a x 2000kg/10a, ETR=a5+b5 logl0x (a5>0, b5<0) EVR=a6+b6 log10x (a6>0 b6<0) In comparison between TONG-IL and PAL-TAL varieties, at the base of the pan evaporation of 343mm and the weight of dry matters of 800∼2000kg/10a, the evapotranspiration ratios for TONG-IL variety were 413∼247, while those for PAL-TAL variety, 404∼250, the evaporation ratios for TONG-IL variety were 197∼38 while those for PAL-TAL variety, 182∼34, and the transpiration ratios for TONG-IL variety were 216∼209 while those for PAL-TAL variety, 222∼216 (Ref. to table IV-23, table IV-25 and table IV-26) 8) The accumulative values of evapotranspiration intensity and transpiration intensity for both PAL-TAL and TONG-IL varieties were almost constant in every climatic year without the affection of the weight of dry matters. Furthermore the evapotranspiration intensity appeared to have more stable at each growth stage. The peaks of the evapotranspiration intensity and transpiration intensity, for both TONG-IL and PAL-TAL varieties, appeared about 60∼70 days after transplanting, and the peak value of the former was 128.8${\pm}$0.7, for TONG-IL variety while that for PAL-TAL variety, 122.8${\pm}$0.3, and the peak value of the latter was 152.2${\pm}$1.0 for TONG-IL variety while that for PAL-TAL variety, 152.7${\pm}$1.9 (Ref.to table IV-27 and table IV-28) 9) The K-value in Blaney & Criddle formula was changed considerably by the meteorological condition (pan evaporation) and related to be a increasing logarithmic function of the weight of dry matters (x) for both PAL-TAL and TONG-L varieties as follows; 800kg/10a x 2000kg/10a, K=a7+b7 logl0x (b7>0) The K-value for TONG-IL variety was a little larger than that for PAL-TAL variety. 10) The peak values of the evapotranspiration coefficient and k-value at each growth stage for both TONG-IL and PAL-TAL varieties showed up about 60∼70 days after transplanting. The peak values of the former at the base of the weights of total dry matters, 800∼2000kg/10a, were 1.14∼1.82 for TONG-IL variety and 1.12∼1.80, for PAL-TAL variety, and at the base of the weights of rough rices, 400∼1000 kg/10a, were 1.11∼1.79 for TONG-IL variety and 1.17∼1.85 for PAL-TAL variety. The peak values of the latter, at the base of the weights of total dry matters, 800∼2000kg/10a, were 0.83∼1.39 for TONG-IL variety and 0.86∼1.36 for PAL-TAL variety and at the base of the weights of rough rices, 400∼1000kg/10a, 0.85∼1.38 for TONG-IL variety and 0.87∼1.40 for PAL-TAL variety (Ref. to table IV-18 and table IV-32) 11) The reasonable and practicable methods that are applicable for calculating the evapotranspiration of paddy rice in our country are to be followed the following priority a) Using the evapotranspiration coefficients based on an expected yield (Ref. to table IV-13 and table IV-18 or Fig. IV-13). b) Making use of the combination method of seasonal evapotranspiration coefficient and evapotranspiration intensity (Ref. to table IV-13 and table IV-27) c) Adopting the combination method of evapotranspiration ratio and evapotranspiration intensity, under the conditions of paddy field having a higher level of expected yield (Ref. to table IV-23 and table IV-27). d) Applying the k-values calculated by Blaney-Criddle formula. only within the limits of the drought year having the pan evaporation of about 450mm during paddy field period as the design year (Ref. to table IV-32 or Fig. IV-22).

  • PDF

인도네시아 유칼립투스 및 아카시아 조림지의 임분수확표 및 이용가능 목재생산량 추정 (Stand Yield Table and Commercial Timber Volume of Eucalyptus Pellita and Acacia Mangium Plantations in Indonesia)

  • 손영모;김훈;이호영;김철민;김철상;김재원;주린원;이경학
    • 한국산림과학회지
    • /
    • 제99권1호
    • /
    • pp.9-15
    • /
    • 2010
  • 본 연구는 인도네시아 칼리만탄 지역의 유칼립투스 및 아카시아 조림지에 대해 임분수확표를 조제하고 이를 토대로 이용가능한 목재생산량을 추정하기 위해 수행되었다. 임분수확표 조제를 위한 생장모델로는 직경급 모델인 Weibull 확률밀도함수를 적용하였으며, 지위별 임령별 임목생장량을 추정하기 위하여 모수 추정, 복구, 예측의 단계를 거쳐 임분 생장식을 도출하였다. 각 단계별로 흉고직경, 수고, 흉고단면적, 최소 및 최대직경 등에 대한 생장식들이 도출되는데, 도출된 각각의 생장식들에 대해서 적합성지수를 산출한 결과, 유칼립투스 조림지의 경우에는 65~89%의 적합성을 보였으며, 아카시아 조림지의 경우에는 72~95%의 적합성을 보여 대체로 높은 적합성을 보이는 것으로 나타났다. 이러한 결과를 토대로 두 수종의 임분수확표를 조제하였으며, 조제된 수확표를 이용하여 지위 '중' 인 10년생 임분의 수확량을 추정하였다. 그 결과 최고 연년 생장량에서 유칼립투스는 21.25 $m^3$/ha, 아카시아는 27.5 $m^3$/ha로 나타나, 아카시아 조림지의 연년 생장량이 더 높은 것으로 나타났다. 이용가능한 목재생산량의 산출을 위해서, 벌채 된 임목의 재장을 2.7 m로 먼저 절동하고 남은 부분은 1.5 m로 절동하는 것으로 가정하여 추정한 결과, 유칼립투스 조림지의 경우에는 총 203.2 $m^3$/ha 중 68.0 $m^3$/ha(33%)가 이용가능 한 것으로 나타났으며, 아카시아 조림지의 경우에는 총 232.9 $m^3$/ha 중 96.7 $m^3$/ha(42%)가 이용가능한 것으로 나타났다. 본 연구결과는 유칼립투스와 아카시아의 생장에 대한 정보를 제공함으로써 상업적 조림이나 탄소배출권 확보를 위한 해외조림을 시행하거나 준비 중에 있는 사업자에게 유용한 자료를 제공할 수 있을 것으로 판단된다.