• Korean Journal of Materials Research
• /
• v.28 no.9
• /
• pp.489-494
• /
• 2018

Lead free $(1-x)(0.675BiFeO_3-0.325BaTiO_3)-xLiTaO_3$ (BFBTLT, x = 0, 0.01, 0.02, and 0.03, with 0.6 mol% $MnO_2$ and 0.4 mol% CuO) were prepared by a solid state reaction method, followed by air quenching and their crystalline phase, morphology, dielectric, ferroelectric and piezoelectric properties were explored. An X-ray diffraction study indicates that lithium (Li) and tantalum (Ta) were fully incorporated in the BFBT materials with the absence of any secondary phases. Dense ceramic samples (> 92 %) with a wide range of grain sizes from $3.70{\mu}m$ to $1.82{\mu}m$ were obtained in the selected compositions ($0{\leq}x{\leq}0.03$) of BFBTLT system. The maximum temperatures ($T_{max}$) were mostly higher than $420^{\circ}C$ in the studied composition range. The maximum values of maximum polarization ($P_{max}{\approx}31.01{\mu}C/cm^2$), remnant polarization ($P_{rem}{\approx}22.82{\mu}C/cm^2$) and static piezoelectric constant ($d_{33}{\approx}145pC/N$) were obtained at BFBT-0.01LT composition with 0.6 mol% $MnO_2$ and 0.4 mol% CuO. This study demonstrates that the high $T_{max}$ and $d_{33}$ for BFBTLT ceramics are favorable for industrial applications.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.24 no.8
• /
• pp.622-626
• /
• 2011

Lead-free piezoelectric ceramics with the composition of $(Na_{0.54}K_{0.46})_{0.96}Li_{0.04}(Nb_{1-0.10-x}Ta_{0.10}Sb_x)O_{3}$ (x= 0~8 mol%) were fabricated by nomal sintering at $1,090^{\circ}C$ for 5 h. the phase structure, microstructure and electrical properties were investigated with a emphasis on the influence of the Sb content. All samples exhibit a single perovskite phase over the whole compositional range. For the ceramics with x= 4 [mol%], two phase transitions are observed at $75^{\circ}C$ and $366^{\circ}C$, corresponding to the phase transitions of orthorhombic to tetragonal (To-t) and tetragonal to cubic (Tc), respectively. high electrical properties of $d_{33}$= 210.83 pC/N, kp= 40%, ${\varepsilon}_r$= 1,091.35, $\rho$= 4.54 g/$cm^2$ were obtained from the specimen with x= 4 [mol%], which suggests that the composition ceramics is a promising lead-free piezoelectric material.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.26 no.3
• /
• pp.204-208
• /
• 2013

In this study, $KNbO_3$-substituted (Li,Na,K)(Nb,Sb,Ta)$O_3$ ceramics were investigated to develop Pb-free composition ceramics for multilayer actuator and energy harvester applications. The X-ray diffraction analysis indicated that all samples were pure perovskite phase and no secondary phase was found. A tetragonality as a function of $KNbO_3$ substitution showed the maximum value at 1.5 mol% $KNbO_3$ and then decreased. The SEM image analysis showed the maximum grain size of $3.14{\mu}m$ at 1.5mol% $KNbO_3$. In the composition ceramics with 1.5 mol% $KNbO_3$ sintered at $1,100^{\circ}C$, excellent properties of density= 4.75 $g/cm^3$, electromechanical coupling factor ($k_p$)= 0.50 and piezoelectric constant($d_{33}$)= 290 pC/N were obtained, respectively, suitable for piezoelectric actuator and energy harvester applications.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.4
• /
• pp.801-804
• /
• 2011

Electrical properties and microstructure were investigated on the effects of $MnO_2$ and the lead-free $(Na_{0.44}K_{0.52}Li_{0.04})(Nb_{0.83}Sb_{0.07}Ta_{0.1})O_3$ ceramics with the addition of $MnO_2$ were fabricated by a conventional mixed oxide method. A gradual change in the crystal and microstructure was observed with the increase of $MnO_2$ addition. For the NKN-LST-xmol%$MnO_2$ sintered at $1100^{\circ}C$, bulk density increased with the addition of $MnO_2$ and showed maximum value at addition 1.0mol% of $MnO_2$. Curie temperature of the NKN-LST ceramics slightly decreased with adding $MnO_2$. The dielectric constant, piezoelectric constant ($d_{33}$) and electromechanical coupling factor ($k_p$) increased below 0.25mol% of $MnO_2$ addition, which might be due to the increase in density. The high piezoelectric properties = 145 pC/N, electromechanical coupling factor = 0.421 and dielectric constant = 2883 were obtained for the NKN-LST-0.25mol%$MnO_2$ sintered at $1100^{\circ}C$ for 4h.

• Preventive Nutrition and Food Science
• /
• v.3 no.3
• /
• pp.287-291
• /
• 1998

Brining property and antimutagenic effects of organically cultivaged Chinese cabbage kimchi (OC kimchi) and common Chinese cabbage imchi (CC kimchi) were studied. The salt absorption rate of leaves was faster than that of stems of the Chinese cabbages. Due to the large portion of leaf in organic Chinese cabbage, organic Chinese cabbage(OC) was much faster in terms of salt absorption rate than common Chinese cabbage(CC). The antimutagenic effects of methanol extracts of CC kimchi and OC kimchi were studied against aflatoxin B1(AFB1) using Ames test on Samonella typhimurium TA 100 and N-methyl-N'-nitro-N-nitrosoguanidine (MNNG) using SOS chromotest. Methanol extract from 6 -day fermented OC kimchi at 15 $^{\circ}C$ showed 80% inhibition rate against the indirect mutage, aflatoxin B1 induced mutagenicit where as that from 6-day fermented CC kimchi at 15 $^{\circ}C$ showed 54% inhibition rate in the Ames test. Methanol extracts from 6-day fermented CC kimchi and OC kimchi showed 27 % and 58 % inhibition rate against direct mutagen , N-methyl-N'-nitro-N-nitrosoguanidine induced mutagenicity, respectively in SOS chormotest, thus OC kimchi exhibited higher antimutagenic activity than kimchi.

• Transactions on Electrical and Electronic Materials
• /
• v.14 no.1
• /
• pp.32-35
• /
• 2013

In this paper, a manufacturing process was developed for fabricating high-quality AlGaN/GaN high electron mobility transistors (HEMTs) on silicon carbide (SiC) substrates. Various conditions and processing methods regarding the ohmic contact and pre-metal-deposition $BCl_3$ etching processes were evaluated in terms of the device performance. In order to obtain a good ohmic contact performance, we tested a Ti/Al/Ta/Au ohmic contact metallization scheme under different rapid thermal annealing (RTA) temperature and time. A $BCl_3$-based reactive-ion etching (RIE) method was performed before the ohmic metallization, since this approach was shown to produce a better ohmic contact compared to the as-fabricated HEMTs. A HEMT with a 0.5 ${\mu}m$ gate length was fabricated using this novel manufacturing process, which exhibits a maximum drain current density of 720 mA/mm and a peak transconductance of 235 mS/mm. The X-band output power density was 6.4 W/mm with a 53% power added efficiency (PAE).

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.38 no.10
• /
• pp.1295-1301
• /
• 2009

This study was carried out to investigate the mutagenic, antimutagenic, cytotoxicity and antitumor effect of Codonopsis lanceolata (CL). CL was extracted with 70% ethanol and then further fractionated to hexane, chloroform, ethyl acetate, butanol and water. Antimutagenic, cytotoxicity and antitumor effects of CL extracts were measured by using Ames test, SRB method, and the tumor growth inhibition test. CL extracts did not show any mutagenicity in the Ames test; however, 70% ethanol extracts and its fractions had strong antimutagenic effects against mutation induced by N-methyl-N'-nitro-N-nitrosoguanidine (MNNG) and 4-nitroquinoline-1-oxide (4NQO). The ethyl acetate fraction of CL (200 ${\mu}g$/plate) showed approximately 72.1% inhibitory effect on the mutagenesis induced by 4NQO against TA98 strain, whereas 69.6% and 67.0% inhibitions were observed on the mutagenesis induced by MNNG and 4NQO against TA100 strain. In anticancer effects, the cytotoxicity of CL extract and its fractions against cancer cell lines including human cervical adenocarcinoma (HeLa), human hepatocellular carcinoma (HepG2), human breast adenocarcinoma (MCF-7), human lung carcinoma (A549) and transformed primary human embryo kidney (293) were investigated. The treatment of 1 mg/mL CL ethyl acetate fraction had the highest cytotoxicity of 74.5%, 70.7% and 80.3% against HeLa, MCF-7 and A549 cells, respectively. In contrast, the extract and its fractions showed only 2$\sim$31% cytotoxicity for a normal human kidney cell line (293). In vivo anticancer effect of CL extract was tested using Balb/c mice transplanted sarcoma-180 cells. CL ethyl acetate fraction showed the highest inhibition rate of 56.4% at the 50 mg/kg concentration.

• Korean Journal of Psychosomatic Medicine
• /
• v.7 no.2
• /
• pp.203-212
• /
• 1999

Objectives : "Alexithymia" mean literally "no word for mood(or emotion)". It is not only a marked constriction in emotional functioning but a deficit in their cognitive processing. We designed this study to investigate the level of alexithymia, psychopathology and personality factors of patients with somatoform disorder and with diabetes mellitus. Methods : The subjects were consisted of patients with somatoform disorder(N=20), patients with diabetes mellitus(N=20), and normal control(N=20). The level of alexithymia, psychopathology and personality factors were assessed by the Toronto Alexithymia Scale(TAS), the Symptom Checklist 90-Revision(SCL 90-R), and the Sixteen Personality Factor Questionnaire(16-PF). And we compared demographic characteristics, psychopathology and personality factors among three groups, and assessed the relationship between alexithymia and psychopathology, and between alexithymia and personality factors. Results : The results were as follows. 1) Patients with somatoform disorder showed significantly higher TAS scores compared to patients with diabetes mellitus and the normal control group. 2) Patients With somatoform disorder showed significantly higher scores of somatization, anxiety scales than patients with diabetes mellitus and the normal control group, and showed significantly higher scores of obsessive-compulsive, depression, phobic anxiety, psychoticism scales than the normal control group by the SCL-90-R. 3) The normal control group showed high intelligence scores only as compared to patients with somatoform disorder by the 16-PF. 4) A significant relationship was found between TAS scores and psychopathology in patients with somatoform disorder. 5) All three groups did not shown any correlation between TAS and 16-PF. Conclusion : Patients with somatoform disorder showed higher TAS scores and more multiple psychopathology than patients with diabetes mellitus and the normal controls. A significant relationship was found between TAS scores and psychopathology in patients with somatoform disorder. We suggest that the therapeutic approach to patients with somatoform disorder to express emotions and manage psychopathology, and that the treatment methods of patients with diabetes mellitus aims to improve firstly physical conditions are more helpful.

• The korean journal of orthodontics
• /
• v.33 no.3 s.98
• /
• pp.185-197
• /
• 2003

This study was performed to identify the characteristics of the OFC1 gene (locus: chromosome 6p24.3) in Korean patients, which is assumed to be the major gene behind the nonsyndromic cleft lip and palate. The sample consisted of 80 subjects: 40 nonsyndromic cleft lip and palate patients (proband, 20 males and females, mean age 14.2 years); and 40 normal adults (20 males and 20 females, mean age 25.6 years). Using PCR-based assay, the OFC1 gene was amplified, sequenced, and then searched for similar protein structures. Results were as follows: 1. The OFC1 gene contains the microsatellite marker 'CA' repeats. The number of the reference 'CA' repeats was 21 times, and formed as TA(CA)11TA(CA)10. But, in Koreans, the number of tandem 'CA' repeats was varied from 17 to 26 except 18, and 'CA' repeats consisted of TA(CA)n. 2. Nine allelic variants were found. Distribution of the OFC1 allele was similar between the patients and control group. 3. There was a replacement of the base 'T' to 'C' after 11 tandem 'CA' repeats in Koreans compared with Weissenbach's report. However, the difference did not seem to be the ORF prediction results between Koreans and Weissenbach's report. 4. The BLAST search results showed the Telomerase reverse transcriptase (TERT) and the Nucleotide binding protein 2 (NBP2) as similar proteins. The TERT was a protein product by the hTERT gene in the locus 5p15.33 (NCBI Genome Annotation; NT023089) The NBP2 was a protein product by the ABCC3 (ATP-binding cassette, sub-family C) gene in the locus 17q22 (NCBI Genome Annotation; NT010783). 5. In the Pedant-Pro database analysis, the predictable protein structure of the OFC1 gene had at least one transmembrane region and one non-globular region.

• Korean Journal of Crystallography
• /
• v.3 no.2
• /
• pp.85-97
• /
• 1992

EBFZM( Electron Beam Floating Zone Melting) 법을 이용하여 몰리브덴에서의 금속계 불순물과 침입형 불순물의 정련기구 및 단결정 성장기구를 연구하 였다. Fe, Cr, Co등의 금속계 불순물은 몰리브덴과의 평형증기압의 차이에 따른 불순물의 선택적 증발에 의하여 우수한 정련효과를 나타내며, 몰리브덴보다 응점이 높은 Ta, W는 잘 제거되지 않았다. 한편 대역 정제에 의한 정련효과는 미약함을 확인하였다. EBF ZM은 C,0,N등의 침입형 불순물의 정련에도 효과적 이었다. 본 연구의 모든 조건에서 몰리브덴은 단결정으로 성장하였으며 2차 재결정 epitaxy에 의한 단결 정 성장기구가 제시되었다. 몰리브덴 단결정 내의 전 위밀도는 strain-anneal법에 의한 단결정의 경우보다 높았으며,본 실험의 열처리 조건에서는 변화하지 않았다. The purification and single crystal growth mechanisms of molybdenum were analysed in EBFZM ( electron beam floating zone melting). Metallic impurities of Fe, Cr, Co were purified efficiently but Ta and W were not removed well in this study. It was due to a preferential evaporation of the elements caused by the difference in equillibrium vapor pressure between the elements and molybdenum. The pu- rification effect by zone refining was not significant. The EBFZM also refined the interstitial impurities of C, 0 and N, effectively. The single crystals of molybdenum were grown regardless of the experimental conditions and the secondary recrystallization epitaxy was surge sled as a growth mechanism. The dislocation density in single crystal was higher than that by strain-anneal method, and was not reduced by heat treatments.