• 제목/요약/키워드: Ta powder

검색결과 126건 처리시간 0.029초

탈수소화 분위기가 탄탈륨 분말 수소농도에 미치는 영향 연구 (Effect of dehydride atmosphere on Hydrogen concentration of Tantalum)

  • 이지은;윤진호;이찬기
    • 산업기술연구
    • /
    • 제41권1호
    • /
    • pp.25-30
    • /
    • 2021
  • Hydride-dehydride process for efficient recycling of tantalum (Ta) is used for manufacturer of Ta powder. In case of metal powder, Impurities as like nitride, oxygen, hydrogen is decreased of physical properties. For manufacture of Ta powder, control of theses impurities is important. In this study, to decreased of impurities on Ta powder using HDH process optimize dehydride condition. Dehydration behavior of Ta is depended on temperature, time, and atmosphere. Phase transition of Ta hydride is analyzed by X-ray diffraction (XRD). Concentration of hydrogen is decreased with temperature increased. At high temperature, concentration of hydrogen in Ta is similar according to time increased. Size and morphology of powder is not observed after dehydride. Ta powder, which is less than 20 um, concentration of hydrogen under 800 ppm is obtain.

Capacitor용 Ta분말 제조공정 Waste Ta를 이용한 TaC분말 제조 (Preparation of TaC Powder from the Waste of Ta powder Fabrication Process for Capacitor)

  • 박제신;서창열;윤재식;배인성;박형호
    • 자원리싸이클링
    • /
    • 제12권4호
    • /
    • pp.51-57
    • /
    • 2003
  • 케퍼시터용 Ta 분말제조공정에서 발생하는 waste 분말을 이용하여 TaC 분말을 자전고온합성법에 의하여 합성하였다. waste TA는 합성반응의 활성 및 산화방지를 위하여 전처리공정에서 미분쇄 및 탈산처리가 필요하였다. 합성반응에서는 TaC 단일상은 6∼7wt.%C의 조성범위에서 얻을 수 있었다. 또한 반응온도는 시료의 압축력에 영향을 받으며, 압축력 1600psi에서 최고반응온도를 나타냈다.

자전연소합성법에 의한 콘덴서용 탄탈륨 분말 제조 (Preparation of Ta Powder for Capacitor by SHS Process)

  • 이승영;이상일;원창환
    • 대한금속재료학회지
    • /
    • 제47권6호
    • /
    • pp.338-343
    • /
    • 2009
  • The purpose of this study is to make the tantalum powder for solid electrolyte capacitor with SHS (self-propagating high-temperature synthesis) process. Raw materials for manufacturing Ta powder were used $Ta_{2}O_{5}$, Mg and NaCl. While progressing SHS process, $Ta_{2}O_{5}$ powder was reduced by Mg powder. The combustion temperature and velocity were easily controled by the varying mole ratio of NaCl, Mg and initial reaction pressure. In the case of only using NaCl as an inorganic agent, the shape is unagglomerated and has high surface area. whereas we were given the powder which has good net structure by the addition of excessive Mg as a diluent.

탄탈륨 분말제조시 분말특성에 미치는 환원제의 영향 (Effect of a Reductant on Production and Characteristics of Tantalum Powder)

  • 윤재식;박형호;배인성;이상백;윤동주;김병일
    • 한국재료학회지
    • /
    • 제11권12호
    • /
    • pp.1047-1051
    • /
    • 2001
  • Purity tantalum powder has been produced by sodium reduction of potassium tantalum fluoride($K_2TaF_7$)in a stainless steel bomb. The influence of experimental variable, such as excess of reductant and temperature of reduction on the yield and quality of the Ta powder has been studied. The excesses of reductant were varied from -20%, -10%, 0%, 5%, 10%, 20%. When -20% excess of sodium was used, the un-reacted sodium remained in the reacted product. The yield of 81% of Ta powder has been achieved by reducing 50g of$K_TaF_7$with 5% sodium in excess of stoichiometric amount in presence of 16.8g of sodium chloride in the charge at a reduction temperature of$905{\circ}C$. The proportion of fine fraction(~325mesh) decreased appreciably with the increase of sodium excess, and the yield of tantalum powder improved from 65% to 94%. The average particle size of Ta Powder is improved from 3 microns to 4 microns in the 5% excess sodium.

  • PDF

도전체 매개반응(EMR)법에 의한 미세 Ta 분말 제조 (Production of Fine Tantalum Powder by Electronically Mediated Reaction (EMR))

  • 박일;이철로;이오연
    • 한국재료학회지
    • /
    • 제14권10호
    • /
    • pp.719-724
    • /
    • 2004
  • Production of fine tantalum powder by calciothermic reduction of tantalum oxides ($Ta_{2}O_5$) pellet through an electronically mediated reaction (EMR) has been investigated. $Ta_{2}O_5$ pellet feed and reductant calcium-nickel (Ca-Ni) alloy were charged into electronically isolated locations in a molten $CaCl_2$ bath. The current flow through an external path between the feed (cathode) and reductant (anode) locations was monitored. The current approximately 4.7A was measured during the reaction in the external circuit connecting cathode and anode location. Tantalum powder with approximately 99 $mass\%$ purity was readily obtained after each experiment. Tantalum powder by EMR using $Ta_{2}O_5$ pellet feed was fine compared with that of metal powder by metallothermic reduction and EMR using $Ta_{2}O_5$ powder feed.

희석제량에 따른 탄탈륨 분말 특성 및 반응온도의 영향 (Characteristic of Tantalum Powder and Effect of Reaction Temperature on the amount of Diluent)

  • 윤재식;박형호;배인성;정성만;김병일
    • 한국분말재료학회지
    • /
    • 제9권5호
    • /
    • pp.315-321
    • /
    • 2002
  • Pure tantalum powder has been produced by combining Na as a reducing agent, $K_2TaF_{7}$ as feed material, KCl and KF as a diluent in a stainless steel(SUS) bomb, using the method of metallothermic reduction. The present study investigated the effect of the amount of the diluent and reaction temperature on the characteristics of tantalum powder in the production process. The temperature applied in this study $850^{\circ}C$ and the amount of the additional reductant from +5% of the theoretical amount used for the reduction of the entire $K_2TaF_{7}$. The results showed that as the amount of the diluent increased, the reaction temperature became lower because the diluent prevented a temperature rise. Also, according to the mixture ratio of the feed materials and the diluent changed from 1 : 0.25 to 1 : 2, the particle size decreased from $5\mutextrm{m}$ to $1\mutextrm{m}$ and a particle size distribution which is below 325 mesh in fined powder increases from 71% to 83%. The average size of Tantalum powder, $2-4\mutextrm{m}$, was close to that of the commercial powders($2-5\mutextrm{m}$). Also under this condition, impurities contained in the powder were within the range allowed for the commercial Ta powders.

수산 탄탈륨 용액을 이용한 초미립 TaC-5%Co 복합 분말의 합성 (Synthesis of Ultrafine TaC-5%Co Composite Powders using Tantalum Oxalate Solution)

  • 권대환;홍성현;김병기
    • 한국분말재료학회지
    • /
    • 제10권4호
    • /
    • pp.255-261
    • /
    • 2003
  • Ultrafine TaC-5%Co composite powders were synthesized by spray conversion process using tantalum oxalate solution and cobalt nitrate hexahydrate(Co($(NO_3)_2$ . 6$H_2O$). The phase of Ta-Co oxide powders had amorphous structures after calcination below 50$0^{\circ}C$ and changed $Ta_2O_5$, $TaO_2$ and $CoTa_2O_6$ phase by heating above $600^{\circ}C$. The calcined Ta-Co oxide powders were spherical agglomerates consisted of ultrafine primary particles <50 nm in size. By carbothermal reaction, the TaC phase began to form from 90$0^{\circ}C$. The complete formation of TaC could be achieved at 105$0^{\circ}C$ for 6 hours. The observed size of TaC-Co composite powders by TEM was smaller than 200 nm.

다시마 분말을 첨가한 막장 에탄을 추출물의 항돌연변이원성 및 세포독성 효과 (Antimutagenicity and Cytotoxic Effect of Ethanol Extract from Korean Traditional Mackjang Added Sea Tangle)

  • 최승필;조미애;전윤영;이득식;함승시
    • 동아시아식생활학회지
    • /
    • 제12권1호
    • /
    • pp.15-22
    • /
    • 2002
  • 식품재료인 메주와 다시마 그리고 이들 재료를 사용하여 자연발효에 의해 제조한 전통 막장에 대한 일반성분을 분석한 결과 기존의 막장에 비해 무기물의 함량이 증가하였다. MNNG에 대한 항돌연변이 효과(400$\mu$g/plate)에서 S. typhimurium TA100 균주에 대해 다시마 분말 5% 첨가 막장이 다른 첨가 농도보다 높은 95.0%의 강한 억제효과를 나타내었다. 4NQO에서도 5%의 다시마 분말을 첨가한 막장이 TA98과 TA100 두균주에 대해서 400$\mu$g/plate에서 각각 81.4%와 88.8%로 다른 첨가 군보다 높은 억제효과를 나타내었다. B($\alpha$)P에 대한 억제효과에서는 동일농도에서 TA98, TA100 두균주에 대하여 다시마 분말 5% 첨가 막장이 각각 85.3%와 91.0%로 다른 첨가군보다 높은 억제활성을 나타내었으며, Trp-P-1에 대해 두균주에 대해서는 96.5%와 92.0%로 다른 농도보다 높은 억제효과를 나타내었다. 암세포 성장 억제효과를 검토한 결과에서는 5%다시마 분말 첨가 막장이 1.0mg/ml시료농도에서 A549가 61.2%, KATOIII는 61.8%, 그리고 HepG2는 66.8%의 성장억제 효과를 나타내었다.

  • PDF