• Proceedings of the KSR Conference
• /
• 2005.05a
• /
• pp.903-908
• /
• 2005

Existing ATC/ATO/TWC system has a ATC(Automatic Train Control) antenna for receiving the speed code, a ATO(Automatic Train Operation) antenna for obtaining the exact distance to go to platform and TWC(Train and Wayside Communication) antenna for communication between on-board and wayside system. This paper proposes the ATO/TWC antenna with tele-powering module, telegram transmitter/receiver module. This antenna communicates with a passive type tag(wayside Precision Stop Marker) for the information of distance from the stop position and a active type tag for the door command and status in the platform.

• Proceedings of the KSR Conference
• /
• 2006.11b
• /
• pp.900-905
• /
• 2006

5678SMRT (Seoul Metropolitan Rapid Transit Co) by a ATC/ATO system the other side which is operated with an automatic movement with a manual operation, the Seoul subway 1.2 lines ATS and 3.4 lines adopt a ATC method and they are operated. But it is improving progressively in SMRT railway ATO method. The ATO the operation method leads exchange of information of wayside and train system for and it is possible, the TWC system configuration is becoming wayside and train system and the radio antenna. It discussed the equipment for a TWC system and a automatic operation from the dissertation which it sees. It investigated a data exchange, a message format and an interface control method and it joined in and a system maintenance conservative method it discussed.

• Proceedings of the KSR Conference
• /
• 1998.11a
• /
• pp.255-261
• /
• 1998

The train automatic operation control system is an on-board train control system that is widely adopted in modern rapid transit systems. The control system consists of TCMS(Train Control and Monitoring System), ATC(Automatic Train Control), ATO(Automatic Train Operation) and TWC(Train to wayside communication) in the train and wayside facilities. The functions of the system is to regulate train riding comfort, to service limited speed and smoothness during start, acceleration, constant speed travel, and fixed point parking under the corresponding commands. The paper describes the simulation model of the train automatic operation control of subway system, configuration of simulator hardware and software and operational algorithms.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.10 no.4
• /
• pp.513-519
• /
• 2015

Static analysis is one of the software source code analysis tools. 9 static analysis methods of three groups are recommended by international electro-technical commission about software safety related standard in IEC 62279. In this paper we choose the proper static analysis method from IEC 62279 about the train wayside communication system, Shorten the time of railway signalling software development using LDRA tools. And it wil be useful to improve the effective development of the safety-related software.

• Journal of the Korean Society for Railway
• /
• v.3 no.3
• /
• pp.154-160
• /
• 2000

The automatic/driverless operation which are great important techniques in metro railway are required to increase higher safety, greater reliability, and transport capacity. To satisfy such demands, we must have the system design and testing technique for the railway system operation. These techniques are related to the onboard train control and communication systems which include TCMS(Train Control and Monitoring System), ATO(Automatic Train Operation), ATC(Automatic Train Control), and TWC(Train to Wayside Communication). These sub-systems must be interfacing with not only each others but also the signal system on the ground. We tested the train control system on Test line that has been developed on the basis of the standardized type EMU for korea railway systems. This test line which is located in Sangju, have been constructed for testing 7 ＆ 8 line of Seoul Metro railway.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.47.4-47
• /
• 2001

The automatic-driverless operation, a very important technique for metro railways, is necessary for achieving higher safety, greater reliability, and bigger transport capacity. To achieve these things, we have to build up the system design and tasting techniques for the railway system operation. These techniques are related to the onboard train control and communication systems which include TCMS(Train Control and Monitoring System), ATO(automatic train Operation), ATC(Automatic train Control), and TWC(Train to wayside communication). These sub-systems should interface not only with each other but also between the sub-systems and the signal system on the ground. For the saving of energy, we designed coasting strategy of ATO system, In this paper, we developed ATO system and tested on the test line and ...

• Proceedings of the KSR Conference
• /
• 2000.05a
• /
• pp.172-179
• /
• 2000

The automatic/driverless operation which are great important techniques in metro railway are required to increase higher safety, greater reliability, and transport capacity. To satisfy such demands, we must have the system design iかd testing technique for the railway system operation. These techniques are related to the onboard train control and communication systems which include TCMS(Train Control md Monitoring System), ATO(Automatic train Operation), ATC(Automatic train Control), and TWC(Train to wayside communication). These sub-systems must be interfacing with not only each others but also the signal system on the ground. We tested the train control system on Test line that has been developed on the basis of the standardized type EMU for korea railway systems. This test line which is located in Sangju, have been constructed for testing 7 ＆ 8 line of Seoul Metro railway.

• Proceedings of the KIEE Conference
• /
• 2000.07b
• /
• pp.1451-1453
• /
• 2000

The automatic/driverless operation which are great important techniques in metro railway are required to increase higher safety, greater reliability, and transport capacity. To satisfy such demands, we must have the system design and testing technique for the railway system operation. These techniques are related to the onboard train control and communication systems which include TCMS(Train Control and Monitoring System), ATO(Automatic train Operation), ATC(Automatic train Control), and TWC(Train to wayside communication). These sub-systems must be interfacing with not only each others but also the signal system on the ground. We tested the train control system on the 7 line that has been developed on the basis of the standardized type EMU for korea railway systems.

• Journal of the Korean Society for Railway
• /
• v.16 no.3
• /
• pp.196-201
• /
• 2013

As there is no failure data for the entire lifecycle of a product, when analyzing reliability measures based on early failure data only, there may be a significant error between the estimated mean life and the real one, because it can be underestimated, or on the other hand, it can be overestimated when analyzing reliability measures based on a large amount of censored data with the failure data. To resolve the issue, this study proposes an optimal sampling estimation procedure that selects the proportion of censored data to estimate the optimal distribution with the idea that the estimated distribution could be approximated as closely as the real life distribution. This would work if we sampled the optimal proportion on the censored data, because failure data has real intrinsic distribution in any situation. We validate the proposed procedure using an actual example. If the proposed method is applied to the maintenance policy of TWC (Train to Wayside Communication) system, then we can establish the optimal maintenance policy. Thus, we expect that it will be effective for improvement of reliability and cost savings.