• 한국경영과학회지
• /
• 제23권3호
• /
• pp.17-26
• /
• 1998

Shortest path problem in road network with turn penalties and prohibitions frequently arises from various transportation optimization models. In this paper, we propose a new algorithm for the shortest Path problem with turn prohibitions and delays. The proposed algorithm maintains distance labels of arcs, which is similar to labels of nodes of Dijkstra's algorithm. Fibonacci heap implementation of the proposed algorithm solves the problem in O(mn ＋ mlogm). We provide a new insight in transforming network with turn penalties and prohibitions into another network in which turn penalties and prohibitions are implicitly considered. The proposed algorithm is implemented using new data structure and compared with Ziliaskopoulos' algorithm. Computational results show that the proposed algorithm is very efficient.

• Journal of Magnetics
• /
• 제18권4호
• /
• pp.466-472
• /
• 2013

This paper presents a new design of the hybrid magnet engine valve actuator using the shorted turn for enhanced dynamic performance. The quick response of coil electric current is the most important factor that determines the opening and closing performance of the hybrid magnet engine valve. The conventional hybrid magnet engine valve actuator, however, has a delayed initial electric current rising when it is driven by voltage control because of the coil inductance which is a typical characteristic of an electromagnetic coil. A shorted turn is newly placed into the upper yoke of the hybrid magnet engine valve actuator to reduce coil inductance and thus, to hasten the initial electric current rising. We performed a dynamic finite element analysis to demonstrate the improvement of the dynamic characteristics of the hybrid magnet engine valve actuator due to the shorted turn.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 추계학술대회 논문집 전기물성,응용부문
• /
• pp.147-148
• /
• 2006

Sl-Thyristor는 기존의 Power semlconductor인 단일 IGBT,MOSFET과 비교하여 높은 정격 전압과 대전류의 소호가 가능하며 빠른 turn on swithcing time을 가지는 특성이 있다. 하지만 게이트 드라이버를 이용한 Sl-Thyristor의 turn on 구동시에는 전압구동의 특성과 turn 0ff시에는 전류 구동의 특성에 가까운 구동 특성이 요구되기 때문에 스위칭 요구 특성에 맞는 게이트 드라이버의 설계 및 제어가 쉽지 않다. 본 논문은 펄스 파워 어플리케이션으로 Sl-Thyristor(PT-201 5kV/100A)를 사용하여 pulsed power moduiator용 Sl-Thyristor의 게이트 드라이버의 요구인 빠른 turn on switching 특성과 turn off 시 Si-Thyristor 내의 전하를 빨리 제거하기 위한 조건을 제시하고 있다.

• 전기학회논문지
• /
• 제60권3호
• /
• pp.531-537
• /
• 2011

This paper proposes a finite element method (FEM)-based model of an interior permanent magnet (IPM) type BLDC motor having stator inter-turn faults. For more realistic simulation studies, the magnetic non-linearity is also considered in proposed model. And the simulation data are verified through experiment. By integrating the developed model with a current-controlled voltage source inverter (CCVSI) model, the characteristics of an inter-turn fault operated by six-switched inverter are investigated considering the speed control. And the circulating current, which is induced by magnetic linkage flux originated from PM, was analyzed from the view point of distortion of air-gap magnetic flux distribution caused deterioration of their torque.

• Journal of Electrical Engineering and Technology
• /
• 제9권5호
• /
• pp.1527-1536
• /
• 2014

This paper investigates the optimal values of turn-on and turn-off angles, and ratio of flux linkage at turn-off angle and peak phase current positions of optimal control for accomplishing maximum output power in an 8/6 Switched Reluctance Generator (8/6 SRG). Phase current waveform is analyzed to determine optimal excitation angles (optimal turn-on and turn-off angles) of the SRG for maximum output power which is applied from a nonlinear magnetization curve in terms of control variables (dc bus voltage, shaft speed, and excitation angles). The optimal excitation angles in single pulse mode of operation are proposed via the analytical model. Simulated and experimental results have verified the accuracy of the analytical model.

• 전기학회논문지
• /
• 제57권8호
• /
• pp.1356-1361
• /
• 2008

A switched reluctance generator(SRG) has simple magnetic structure, and needs simple power electronic driving circuit. But, a SRG are no windings or permanent magnets on the rotor, and there are concentrated windings placed around each salient pole on the stator. Because of the characteristics of time-sharing excitation, the control of SRG is very flexible. And there are several parameters for controlling SRG, such as switch turn-on angle, switch turn-off angle, and exciting voltage and controlling mode, all these will affect the generation greatly. A SRG has positive torque at increasing inductance region and negative torque at decreasing inductance region. In this paper, we studied characteristics about the switch turn-on and off angles according to switch method for constant output voltage of the fixed speed SRG. It is the acoustic noise and torque ripple characteristics. Characteristics for a switch angle and method are presented by experiment using a 50W SRG with 12/8 poles.

• 전력전자학회논문지
• /
• 제22권2호
• /
• pp.181-184
• /
• 2017

This study analyzes the turn-on and turn-off transients of a metal-oxide-semiconductor field-effect transistor (MOSFET) with high-switching frequency systems. In these systems, the voltage distortion becomes serious at the output terminal of a Vienna rectifier by the turn-off delay of the MOSFET. The current has low-order harmonics through this voltage distortion. This paper describes the transient of the turn-off that causes the voltage distortion. The algorithm for reducing the sixth harmonic using a proportional-resonance controller is proposed to improve the current distortion without complex calculation for compensation. The reduction of the current distortion by high-switching frequency is verified by experiment with the 2.5-kW prototype Vienna rectifier.

• Nuclear Engineering and Technology
• /
• 제54권2호
• /
• pp.501-506
• /
• 2022

Long turn-off time limits high frequency operation of Bipolar Junction Transistors (BJTs). Turn-off time decreases with increases in the recombination rate of minority carriers at switching transients. Fast neutron irradiation on a Si BJT incurs lattice damages owing to the displacement of silicon atoms. The lattice damages increase the recombination rate of injected holes with electrons, and decrease the hole lifetime in the base region of pnp Si BJT. Fast neutrons generated from a beryllium target with 30 MeV protons by an MC-50 cyclotron were irradiated onto pnp Si BJTs in experiment. The experimental results show that the turn-off time, including the storage time and fall time, decreases with increases in fast neutron fluence. Additionally, it is confirmed that the base current increases, and the collector current and base-to-collector current amplification ratio decrease due to fast neutron irradiation.

• Nuclear Engineering and Technology
• /
• 제55권9호
• /
• pp.3334-3341
• /
• 2023

We studied the irradiation effects of fast neutron generated by a 30 MeV cyclotron on the electrical and switching characteristics of NPT-IGBT devices. Fast neutron fluence ranges from 2.7 × 10⁹ to 1.82 × 10¹³ n/cm². Electrical characteristics of the IGBT device such as I-V, forward voltage drop and additionally switching characteristics of turn-on and -off were measured. As the neutron fluence increased, the device's threshold voltage decreased, the forward voltage drop increased significantly, and the turn-on and turn-off time became faster. In particular, the delay time of turn-on switching was improved by about 35% to a maximum of about 39.68 ns, and that of turn-off switching was also reduced by about 40%-84.89 ns, showing a faster switching.

• 한국정보통신학회논문지
• /
• 제14권3호
• /
• pp.663-668
• /
• 2010

차량을 타고 이동할 경우 좌회전, 우회전, U턴 등의 방향 전환은 차량의 속력 감소의 주요한 요인이 된다. 즉, 같은 거리를 이동할 경우 방향전환이 잦은 경로보다 직진 구간이 많은 경로가 보다 빨리 목적지에 도착할 수 있다. 이 논문에서는 직진성이 높은 경로를 탐색하기 위해서 방향전환비용을 고려한 턴 휴리스틱과 이률 적용한 경로탐색 알고리즘(TA* 알고리즘)을 제안한다. 또한 TA* 알고리즘의 탐색비용을 개선하기 위해서 일부 구간에서만 턴 휴리스틱을 적용하는 가변적인 턴 휴리스틱(VTA* 알고리즘)을 제안한다.