• 한국대기환경학회지
• /
• 제12권1호
• /
• pp.67-77
• /
• 1996

Total suspended particulate matters (TSP) were collected based on a size segregation method by a cascade impactor for 6 consecutive years (form Dec. 1989 to sep. 1994) in the Kyung Hee University-Suwon Campus, and 6 trace metals (Ca, Si, Fe, Pb, Cu, Zn) were determined by an x-ray fluorescence spectroscopy. Total number of samples collected during the study are 118 sets and each set of sample comsists of 9 filters. The levels of TSP and 6 trace metals were then used to examine seasonal and annual variations with respects to their size distributions. For statistical analyses, raw data were initially transformed by both logarithmic and root transformating to approximately normalize them, and then size distribution functions for each trace element were separately developed season-to-season by a regression analysis in order to obtain maximum amount of physical information, Subsequently, each developed model was verified by comparing with supervised data collected on 1994. The result showed that each prediction model was in good agreement except the fall, partly due to lack of the data collected on fall, 1994.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 춘계학술대회논문집
• /
• pp.786-790
• /
• 2003

The purpose of this research is to observe that the acoustic characters of classroom have some difference by several conditions. TSP has used to measure impulse response and such physical indexes as RT(Reverberation Time), D$\sub$50/, and STI(Speech-Transmission-Index) are computed by it. we investigate difference under some conditions such as when students were present at each classroom and when was not so, and when professor used a microphone and unused it. In this study, we found that reverberation time when people take a seat is lower than was not so. we wish to help one who work for construction industry, as they build a kind of classroom

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제16권3호
• /
• pp.380-386
• /
• 2016

This paper presents a compact and low-power on-chip touch sensor and readout circuit using shunt proximity touch sensor and its design scheme. In the proposed touch sensor readout circuit, the touch panel condition depending on the proximity of the finger is directly converted into the corresponding voltage level without additional signal conditioning procedures. Furthermore, the additional circuitry including the comparator and the flip-flop does not consume any static current, which leads to a low-power design scheme. A new prototype touch sensor readout integrated circuit was fabricated using complementally metal oxide silicon (CMOS) $0.18{\mu}m$ technology with core area of $0.032mm^2$ and total current of $125{\mu}A$. Our measurement result shows that an actual 10.4 inches capacitive type touch screen panel (TSP) can detect the finger size from 0 to 1.52 mm, sharply.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 2000년도 춘계학술대회 학술발표 논문집
• /
• pp.232-235
• /
• 2000

In this paper, we introduce a new genetic reordering operator based on the concept of schema to solve the Traveling Salesman Problem(TSP). Because TSP is a well-known combinatorial optimization problem and belongs to a NP-complete problem, there is a huge solution space to be searched. For robustness to local minima, the operator separates selected strings into two parts to reduce the destructive probability of good building blocks. And it applies inversion to the schema part to prevent the premature convergence. At the same time, it searches new spaces of solutions. In addition, we have the non-schema part to be applied to inversion as well as for robustness to local minima. By doing so, we can preserve diversity of the distributions in population and make GA be adaptive to the dynamic environment.

• 한국CDE학회논문집
• /
• 제7권3호
• /
• pp.184-188
• /
• 2002

In 2D-Profile machining using cutter radius compensation cutter interferences are very common. To prevent the cutter interferences undercuts are inevitable in some regions of the profile. The undercut regions require cleanup machining using smaller radius tools. This paper considers a procedure of the tool path generation for the cleanup profile machining. And two methods are introduced for an efficient tool path generation. One is how to reduce the machining time by uniting adjacent tool paths of undercut regions, and the other is how to find the tool path with the minimal distance by applying TSP algorithm.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2002년도 추계학술발표논문집 (상)
• /
• pp.323-326
• /
• 2002

DNA 컴퓨팅은 생체 분자들이 갖는 막대한 병렬성을 이용하여 조합 최적화 문제에 적용하는 연구가 많이 시도되고 있다. 특히 TSP(Travelling Salesman Problem)는 간선에 대한 가중치 정보가 추가되어 있기 때문에 가중치를 DNA 염기 배열로 표현하기 위한 효율저인 방법들이 제시되지 않았다. 따라서 본 논문에서는 DNA 컴퓨팅에 DNA 코딩 방법을 적용하여 정점과 간선을 효율적으로 생성하고 표현된 DNA 염기 배열의 간선에 실제간을 적용하여 가중치 정보를 계산하는 ACO(Algorithm for Code Optimization)를 제안한다. DNA 코딩 방법은 변형된 유전자 알고리즘으로 DNA 기능을 유지하며, 서열의 길이를 줄일 수 있으므로 최적의 서열을 생성할 수 있는 특징을 갖는다. 실험에서 ACO를 TSP에 적용하여 Adleman의 DNA 컴퓨팅 알고리즘과 비교하였다. 그 결과 초기 문제 표현에서 우수한 적합도 값을 생성했으며, 경로의 변화에도 능동적으로 대처하여 최적의 결과를 빠르게 탐색할 수 있었다.

• 자원ㆍ환경경제연구
• /
• 제1권1호
• /
• pp.115-149
• /
• 1991

In evaluating current environmental protection policy, economists often note that current regulations are more costly than necessary to meet environmental quality standards. While the a priori case can be made that current regulatory approaches entail higher-than-necessary costs to attain environmental standards, there is relatively little empirical evidence to support this claim in Korea. The purpose of this analysis is to supply some of the missing evidence by presenting the results of one study that assesses some of the potential savings associated with implementing economic, rather than command-and-control regulatory approaches to abate one type of air pollution in one region, in Korea, Specifically, the analysis examine the costs of meeting a long-term standard for TSP under the alternative control strategies for stationary sources of TSP in Ulsan Industrial Complex region. The alternative strategies that are considered are current command-and-control and various marketable permit designs. The analysis shows that the most efficient policy of emissions control is economic approaches, supporting results of previous empirical studies conducted in other countries.

• 산업공학
• /
• 제13권2호
• /
• pp.195-203
• /
• 2000

This paper considers the problem of sequencing printed circuit boards(PCBs) on an automatic surface mount device(SMD) placement machine in order to minimize total setup time. Since the total set of component feeders needed by all boards cannot be loaded simultaneously on the magazine, the setup must be made between two successive boards in the sequence. It is assumed that the setup time depends on the number of component feeders to be replaced in the magazine. An important characteristic is that each feeder occupies a different number of slots in the magazine. This problem is equivalent to travelling salesman problem(TSP) except that the distances between two cities, that is, the setup times between two boards, are not known in advance. So, TSP-based heuristics with new distance functions are presented and their performances are compared through various test problems. Computational results indicate that our heuristics outperform existing methods.

• 한국IT서비스학회:학술대회논문집
• /
• 한국IT서비스학회 2006년도 춘계학술대회
• /
• pp.181-185
• /
• 2006

최근 차량에 설치된 단말기를 통해 길안내 서비스, 교통정보 서비스 등 다양한 정보를 제공하는 텔레매틱스 서비스가 활발하게 연구되고 있다. 하지만 현재 대다수의 텔레매틱스 서비스는 최대 15m 의 공간오차를 가진 GPS 기술을 이용하기 때문에 차량의 정확한 위치정보를 파악하기는 힘들다. 따라서 본 논문에서는 무선 센서노드를 이용해 GPS 보다 정확한 차량의 위치정보와 속도를 감지하고 노드 간 통신 프로토콜로서 Telematics Scheduling Protocol(TSP)[1]을 사용하여 교차로 중앙에 위치한 베이스 스테이션으로 전송하여 교차로에서 발생할 수 있는 차량 충돌을 예측하며 충돌 위험 정보를 교차로에 근접한 자동차에게 알려주는 텔레매틱스 교통안전시스템[1]을 소개한다. 또한 교통안전시스템으로서의 신뢰성과 실시간성을 비교평가하기 위하여 TSP 프로토콜, IEEE 802.11[2]과 802.15.4[3]를 대상으로 네트워크 시뮬레이터 ns-2[4]를 이용하여 시뮬레이션한다.

• 한국음향학회:학술대회논문집
• /
• 한국음향학회 1994년도 FIFTH WESTERN PACIFIC REGIONAL ACOUSTICS CONFERENCE SEOUL KOREA
• /
• pp.867-872
• /
• 1994

The transfer function of an acoustic system, in general, often exhibits a wide dynamic range and a very long impulse response. The time-stretched pulse (TSP) proposed by Aoshima (ATSP) has a small peak-factor and is accordingly suitable for the measuring impulse responses. The pulse is not so suitable, however, for the measurement of impulse responses over a wide frequency range. In this paper, we try to generalize and optimize this method (OATSP). This makes the method applicable for measuring of impulse responses longer than the length of the TSP. An analysis of error in such a case is also shown. Finally, we discuss how to implement this technique in specific measurement conditins.