• Journal of the Korean Institute of Intelligent Systems
• /
• v.14 no.1
• /
• pp.46-51
• /
• 2004

his paper presents a novel design technique for the TS fuzzy classifier via linear matrix inequalities(LMI). To design the TS fuzzy classifier built by the TS fuzzy model, the consequent parameters are determined to maximize the classifier's performance. Differ from the conventional fuzzy classifier design techniques, convex optimization technique is used to resolve the determination problem. Consequent parameter identification problems are first reformulated to the convex optimization problem. The convex optimization problem is then efficiently solved by converting linear matrix inequality problems. The TS fuzzy classifier has the optimal consequent parameter via the proposed design procedure in sense of the minimum classification error. Simulations are given to evaluate the proposed fuzzy classifier; Iris data classification and Wisconsin Breast Cancer Database data classification. Finally, simulation results show the utility of the integrated linear matrix inequalities approach to design of the TS fuzzy classifier.

• The Journal of the Acoustical Society of Korea
• /
• v.26 no.6
• /
• pp.276-285
• /
• 2007

In this paper it was discussed and compared measured loudspeaker impedance curve with ones reconstructed by TS parameters estimated using four kinds of parameter estimation methods developed in frequency domain. Frequency dependent parameters were introduced and derived using least square error minimization technique. For known dynamic mass TS parameter estimation methods were reviewed and also proved non-uniqueness of these parameters by simulation method. Minimum phase transformation was adopted to derive phase information from magnitude of loudspeaker electrical impedance curve measured by one channel analyzer.

• Journal of Ginseng Research
• /
• v.20 no.1
• /
• pp.23-29
• /
• 1996

The effect of ginseng glycosides and their aglycones on the thermodynamic characteristics of membranes from dipalmitoylphosphatidylcholine (DPPC) was investigated. Total saponins (TS) from Korean red ginseng, Panax ginseng C.A. Meyer, interacted with the Eel Phase of lipid in the Polar region and did not penetrate the deeper glycerol backbone of lipid molecule. From the all investigated components of TS (aglycons and ginsenosides), only 20-(S)-panaxadiol (PD) had an effect similar to TS. High concentration of TS penetrated in hydrophobic Cl-C8 region. The presence of cholesterol did not influence the interaction of TS with DPPC. An elimination of transition, however, took place at 10~100 $\mu\textrm{g}$/ml of TS. DPPC had a low ability to interact with cholesterol (CHL) as compared with other lecithins except ethanolamine. From our results, only TS and PD, at high concentrations (100 mol%), influenced the phase transition of mixture of DPPC:CHL.

• The Journal of the Acoustical Society of Korea
• /
• v.25 no.3E
• /
• pp.101-109
• /
• 2006

Besides dorsal-aspect target strength (TS) of the fish, side-aspect TS information is also acoustically important parameter in fisheries acoustics. In this study, the side-aspect TS of 11 black sea bream (Acanthopagurus schlegeli) were measured using a split beam echosounder of 120, 200, and 420 kHz; total length of the fish ranged from 12.4 to 23.7 cm, and wet weight from 27.5 to 229.8g. For the precise TS measurement with side-aspect angle, we used anesthetized and tethered specimens of known size while being rotated through $360^{\circ}C$ by means of a carousel structure. The side-aspect TS measurements of the fish were conducted by rotating the fish in the horizontal plane at 50 interval. The ping interval was 0.2 second and elapsed time at each angle was 30-60 second. As a result, the measured side-aspect TS data were fitted by sinusoidal function. The relationships between fish length and near full side-aspect TS were as follows: $TS_{120kHz}= 21.46 log (TL)-67.5 (r = 0.70), \;TS_{200 kHz}= 31.03 log (TL)-76.9 (r=0.83),\;TS_{420 kHz}= 30.79 log (TL)-72.2 (r = 0.77)$. For comparison, theoretically estimated side-aspect TS from the Kirchhoff ray mode (KRM) model, which based on swimbladder and body morphology, were compared with the measured TS.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.11a
• /
• pp.812-819
• /
• 2007

Acoustic Target Strength (TS) is a major parameter of the active sonar equation, which indicates the ratio of the radiated intensity from the source to the re-radiated intensity by a target. This research provides the time pattern of TS in time domain, which is applicable to pulse modulated acoustic pressure field. If the time pattern of TS is predicted by using TS equation in frequency domain, it takes long time and difficult since time function pulsed acoustic wave may be decomposed into their frequency domain components. But TS equation in time domain has a convenience. If the expression for pulsed acoustic field has been obtained, the problem can be solved. Furthermore this paper introduces about mathematical equivalence quantities between EM wave and Acoustic Wave.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 1997.10a
• /
• pp.449-452
• /
• 1997

In this paper, we suggest a variable structure controller using the time-varying nonlinear sliding surface instead of the fixed sliding surface, which has been the robustness against parameter variations and extraneous disturbance during the reaching phase. As appling TS fuzzy algorithm to the regulation of the nonlinear sliding surface, the reaching time of the system trajectory is faster than the fixed method . This proposed scheme has better performance than the conventional method in reaching time parameter variation and extraneous disturbance. To demonstrate its performance, the proposed control algorithm is applied to a rotational inverted pendulum.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.43 no.7
• /
• pp.1152-1157
• /
• 1994

The glasses were prpared in the system CuI-CuS12TS-CuS12TO-MoOS13T by rapid quenching technique. These glasses have high ionic conductivities at 2$0^{\circ}C$ in the range of 10S0-1T[S/m], and the conductivities increase with increasing CuI and CuS12TS content. The value of activation energy for dielectric relaxation is nearly identical with that for conductivity. The cole-Cole parameter $\beta$ for representation of the distribution of dielectric relaxation times varies the range from 0.92 to 0.96. This parameter has a weak dependence on the composition of glass, and is independent of temperature. The correlation factors P for the glasses shows from 1.1 to 1.7.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.15 no.6
• /
• pp.127-134
• /
• 2011

It has been reported that the length parameter of high strength bolts results in the variance in tensile loads. The required turn of nut for each length is specified in AISC RCSC specification. There is no specific regulation datum about the bolt length in the two national codes and specifications in Korea. Therefore this study focused on evaluating influence of the clamping torque subjected to length parameter of high strength bolts. Two types of high strength bolt specimens were manufactured and tested; High Strength Hexagon bolt specified in ASTM A490 and Torque Shear Bolt in KS B 2819. The length parameter ranged from 60mm(3d) to 140mm(7d). The torque, turn of nut, and the clamping force were analyzed to review whether length parameter affects on the required tensile strength. To evaluate the effects of the length parameter on the torque and turn of nut for the required strength and clamping force, statistical analysis was also carried out.

• The Journal of the Acoustical Society of Korea
• /
• v.27 no.7
• /
• pp.325-332
• /
• 2008

The prediction method of TS parameters, frequency response, and electrical input impedance is proposed with physical properties of parts and results of electromagnetic FEA(Finite Element Analysis) in a loudspeaker driver design. In design for weight reduction and improvement of flux density asymmetry, the prediction results are well coincided with measurement ones. As the applications, it can be applied in design for improvement of the $2^{nd}$ harmonic distortion with flux density distribution analysis. The proposed method is expected to be utilized for reducing trial-and-error process in electromagnetic parts design. It can also be used for providing guidelines for parts selection in the early stages.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.21 no.2
• /
• pp.63-70
• /
• 2013

Experiments in a pilot-scale hybrid multi-stage unit system (HMUS) combination of ATAD and EGSB followed by SBR process for pig slurry treatment were conducted to demonstrate the feasibility of using autothermal thermophilic aerobic digestion (ATAD) and expended granular sludge bed (EGSB) followed by sequencing batch reactor (SBR) system. Contaminants in pig slurry with high organic matter, nitrogen (N) and phosphorus (P) content were completely removed in the combined process. The highest removal rate for CODcr among contaminants in the feed pig slurry was attained by about 43.3% in ATAD unit process. Also TS removal rate of 96.5% was attained and the highest in the next coagulation unit process. The highest removal rate of CODcr under operating parameter conditions of OLR(organic loading rate), 3-6Kg $COD/m^3{\cdot}day$ and line velocity, 1.5-4m/h was earned at 3days of HRT. The disinfection of pathogens was effective at 50,000mg/L of TS in ATAD unit process. Biogas production per organic removal was $2.3{\sim}8.5m^3/kgTS{\cdot}d$ (average $5.2m^3/kgTS{\cdot}d$) in EGSB unit process. The average removal rates of CODcr 71.7%, TS 64.1%, TN 45.9%, and TP 50.4% were earned in the intermittent aeration SBR unit process.