• Nuclear Engineering and Technology
• /
• 제52권4호
• /
• pp.689-699
• /
• 2020

In this work, new multi-recycling options of TRU nuclides using PWR fuel assemblies comprised of MOX and FCM (Fully Ceramic Micro Encapsulated) fuels are suggested and neutronically analyzed. These options do not use a fully recycling of TRU but a partial recycling where TRUs from MOX fuels are recycled while the ones from FCM fuels are not recycled due to their high consumption rate resulted from high burnup. In particular, additional external TRU feed in MOX fuels for each cycle was considered to significantly increase the TRU consumption rate and the finally selected option is to use external TRU and enriched uranium feed as a makeup for the heavy metal consumption in MOX fuels. This hybrid external feeding of TRU and enriched uranium in MOX fuel was shown to be very effective in significantly increasing TRU consumption rate, maintaining long cycle length, and achieving negative void reactivity worth during recycling.

• Nuclear Engineering and Technology
• /
• 제35권4호
• /
• pp.336-346
• /
• 2003

This study is intended to evaluate the dependency of TRU recycling characteristics on the neutron spectrum shift in a Pb-Bi cooled core. Considering two Pb-Bi cooled cores with the soft and the hard spectrum, respectively, various characteristics of the recycled core are carefully examined and compared with each other. Assuming very simplified fuel cycle management with the homogeneous and single region fuel loading, the burnup calculations are performed until the recycled core reached to the (quasi-) equilibrium state. The mechanism of TRU recycling toward the equilibrium is analyzed in terms of burnup reactivity and the isotopic compositions of TRU fuel. In the comparative analyses, the difference in the recycling behavior between the two cores is clarified. In addition, the basic safety characteristics of the recycled core are also discussed in terms of the Doppler coefficient, the coolant loss reactivity coefficient, and the effective delayed neutron fraction.

• 한국방사성폐기물학회:학술대회논문집
• /
• 한국방사성폐기물학회 2009년도 학술논문요약집
• /
• pp.55-56
• /
• 2009

From the OT cycle analysis results, the nuclear power demand grows to ~70 GWe in 2150. The SF and TRU out-core inventories in 2150 will be 186500 t and 2100 t, respectively. The MOX fuel cycle gives 84% and 9% lower values for the SF and out-core TRU inventories, respectively.

• Nuclear Engineering and Technology
• /
• 제47권1호
• /
• pp.47-58
• /
• 2015

Four recycling scenarios involving pyroprocessing of spent fuel (SF) have been investigated for a 600-MWe transmutation sodium-cooled fast reactor (SFR), KALIMER. Performance evaluation was done with code system REBUS connected with TRANSX and TWODANT. Scenario Number 1 is the pyroprocessing of Canada deuterium uranium (CANDU) SF. Because the recycling of CANDU SF does not have any safety problems, the CANDU-Pyro-SFR system will be possible if the pyroprocessing capacity is large enough. Scenario Number 2 is a feasibility test of feed SF from a pressurized water reactor PWR. Thefsensitivity of cooling time before prior to pyro-processing was studied. As the cooling time sensitivity of cooling time before prior to pyro-processing was studied. As the cooling time increases, excess reactivity at the beginning of the equilibrium cycle (BOEC) decreases, thereby creating advantageous reactivity control and improving the transmutation performance of minor actinides. Scenario Number 3 is a case study for various levels of recovery factors of transuranic isotopes (TRUs). If long-lived fission products can be separated during pyroprocessing, the waste that is not recovered is classified as low- and intermediate-level waste, and it is sufficient to be disposed of in an underground site due to very low-heat-generation rate when the waste cooling time becomes >300 years at a TRU recovery factor of 99.9%. Scenario Number 4 is a case study for the recovery factor of rare earth (RE) isotopes. The RE isotope recovery factor should be lowered to ${\leq}20%$ in order to make sodium void reactivity less than <7$, which is the design limit of a metal fuel.

• Nuclear Engineering and Technology
• /
• 제42권2호
• /
• pp.131-144
• /
• 2010

The Korea Atomic Energy Research Institute (KAERI) has been developing pyroprocessing technology for recycling useful resources from spent fuel since 1997. The process includes pretreatment, electroreduction, electrorefining, electrowinning, and a waste salt treatment system. This paper briefly addresses unit processes and related innovative technologies. As for the electroreduction step, a stainless steel mesh basket was applied for adaption of granules of uranium oxide. This basket was designed for ready handling and transfer of feed material. A graphite cathode was used for the continuous collection of uranium dendrite in the electrorefining system. This enhances the throughput of the electrorefiner. A particular mesh type stirrer was designed to inhibit uranium spill-over at the liquid Cd crucible. A residual actinide recovery system was also tested to recover TRU tracer. In order to reduce the waste volume, a crystallization method is employed for Cs and Sr removal. Experiments on the unit processes were tested successfully, and based on the results, engineering-scale equipment has been designed for the PRIDE (PyRoprocess Integrated inactive DEmonstration facility).

• 방사성폐기물학회지
• /
• 제10권3호
• /
• pp.219-228
• /
• 2012

우리나라에서의 고준위폐기물 처분을 위한 연구는 1997년부터 시작하였으며, 국내에서 발생하는 경수로 사용후핵연료와 중수로 사용후핵연료를 처분대상으로 하여 2006년도에는 한국형 사용후핵연료 기준처분시스템(KRS) 개발을 완료하였다. 이후, 경수로 사용후핵연료로부터 재활용 가능물질을 회수하는 재순환주기를 고려하여 재활용을 위한 파이로공정 연구를 수행하고 있어, 이 공정으로부터 발생하는 고준위폐기물에 대한 처분연구를 수행하고 있다. 본 논문에서는 심지층 처분시스템 개념설정에 중요한 인자인 파이로공정으로부터 발생하는 처분대상 폐기물인 세라믹고화 폐기물과 금속폐기물에 대한 특성분석 결과와 폐기물별로 특성에 적합한 처분용기 개념을 기술하였다. 이를 바탕으로 처분대상 폐기물에서 발생하는 붕괴열의 특성을 고려한 열해석을 통하여 지하처분시설에서의 처분용기 간격과 처분동굴 간격을 결정하고, 이를 반영하여 심지층 처분 시스템(A-KRS) 개념을 도출하였다. 이렇게 도출된 처분시스템 입지를 검토하기 위하여 KURT 시설 부지를 대상으로 가상부지로 설정하고, 가상 부지에 대한 지질 및 수리특성을 이용하여 최적의 배치(안)을 제시하였다. 본 연구의 결과는 추후 실제 부지특성자료와 연계하여 처분장 설계 및 처분안전성 평가에 입력자료로 활용될 것이다.