• 대한기계학회논문집B
• /
• 제37권9호
• /
• pp.863-871
• /
• 2013

본 수치적 연구에서는 국내의 발전소에서 사용되는 일반적인 고차압 트림의 형상 중 대표적으로 사용되는 형상의 트림을 기본형 트림으로 정하여, 이를 설계한 후 캐비테이션과 유량의 관점에서 유동 특성을 살펴보았다. 실제로 운전되는 발전소계통의 운전조건을 참고하여 고차압 조건으로서 입 출구 차압을 18.7 MPa로, 온도를 $160^{\circ}C$로 설정하였다. 트림의 주요 설계 인자로서 유로의 면적, 유로의 단(stage)과 유로의 방향을 채택하여, 유량과 케비테이션 발생 특성을 개선하기 위해 기본형 트림을 재설계하였다. 개선을 위해 트림을 반경방향으로 세 영역으로 나눈 후 각 영역에서 재설계 인자를 이용하여 형상을 변경하였다. 4가지의 재설계 모델을 제안하였으며, 각 모델 형상에 대한 수치해석을 수행하였다. 유량 및 캐비테이션 발생량의 관점에서 기본형 트림과 설계개선 트림들을 비교하여 재설계 모델의 성능이 개선되었음을 확인하였다.

• 한국항해항만학회지
• /
• 제37권2호
• /
• pp.137-142
• /
• 2013

The displacement Deep-V catamaran concept was developed in Newcastle University(UNEW) through development of the systematic Deep-V catamaran series. One of the most important Deep-V catamaran launched to date is Newcastle University's own multi-purpose research vessel, The Princess Royal. The vessel was launched in 2011 and enhanced the Deep-V catamaran concept further with the successful adoption of a novel anti-slamming bulbous bow and tunnel stern for improved efficiency. It was however identified that the vessel has substantial amount of dynamic trim that limited the visibility of the captain. The dynamic trim also increased the wave-making resistance thereby preventing the vessel from attaining its maximum speed in certain sea states. This paper therefore presents the application of devices such as Trim Tabs, Interceptors, Transom Wedges and Integrated Transom Wedges-Tabs to control the dynamic trim and improvement of fuel efficiency of the vessel. All of these energy saving devices were fitted into a model for tests in Newcastle University's Towing Tank. Model test verification confirmed that the optimum appendage was the interceptors, they produced a 5% power saving and 1.2 degree trim reduction at 15 knots, and investigations of full scale trials will be scheduled with and without application of device to compare the improvement of performance.

• 대한조선학회지
• /
• 제5권2호
• /
• pp.51-52
• /
• 1968

The effect of trim on the form factor K was investigated by the towing tank test using a 4 ft. Mariner model. The effect is considerably small. The results are shown in Fig.1.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.1647-1650
• /
• 1997

This paper presents the control law of Automatic Rudder Trim System(ARTS) for the KTX-1. The proposed ARTS is designed mainly t reduce the pilot's work load for trimming in the various conditiions of engine torque. airspeed, and aircraft configuration. The ARTS partially compensates the transient yawing motion due to change of engine power in turboprop aircraft because of the limitation of the actuation speed of the trim motor. In this paper flight test data are analyzed to understand the phenomena and the dynamics of the reversible rudder flight control system is derived. Finally, the control concept and conrtol law of ARTS are described and the characteristics of the ARTS are analyzed through simulation study.

• 한국유체기계학회 논문집
• /
• 제16권1호
• /
• pp.32-39
• /
• 2013

The multi-stage control valve is one of the devices which controls cavitation and high pressure drop. To attain the high pressure drop, the conventional control valves adopted the multi-stage trim to avoid the occurrence of local cavitation in valves. This work studied the effect of divergence angle on the characteristics of multi-stage trim. Pressure drop and flow characteristics was calculated for the 1 passage of multi-staged trim by using the FLUENT 6.3.26. The result showed that the pressure drop is significantly influenced by the divergence angle of multi-stage trim. In addition, the pressure drop increased consistently as the Reynolds number and divergence angle increases.

• 한국공작기계학회논문집
• /
• 제13권1호
• /
• pp.88-93
• /
• 2004

In general, a fundamental structural design consideration for an automobile is the overall dynamic behavior in bending and torsion. Dynamic behavior of the automobile are mainly influenced by the structural stiffness of B.I.W.(body-in-white) and the physical property of trim components. In this paper, the modeling techniques for various trim components of middle-sized bus are presented, and the dynamic effects of the trim components on the vibration characteristics of the bus are investigated. The $1^{st}$ torsional frequency is decreased by attaching windshield and backlite to the B.I.W., but the $1^{st}$ vertical bending frequency and the $1^{st}$ lateral bending frequency are increased. The natural frequencies of the bus are decreased by attaching doors and windows. And also, the natural frequencies of the bus are large decreased by attaching seats, instrument panel etc. The study shows that the dynamic characteristics of the bus can be effectively predicted in the initial design stage.

• Molecules and Cells
• /
• 제44권7호
• /
• pp.444-457
• /
• 2021

Although the mechanism of chronic myeloid leukemia (CML) initiation through BCR/ABL oncogene has been well characterized, CML cell differentiation into erythroid lineage cells remains poorly understood. Using CRISPR-Cas9 screening, we identify Chromobox 8 (CBX8) as a negative regulator of K562 cell differentiation into erythrocytes. CBX8 is degraded via proteasomal pathway during K562 cell differentiation, which activates the expression of erythroid differentiation-related genes that are repressed by CBX8 in the complex of PRC1. During the differentiation process, the serine/threonine-protein kinase PIM1 phosphorylates serine 196 on CBX8, which contributes to CBX8 reduction. When CD235A expression levels are analyzed, the result reveals that the knockdown of PIM1 inhibits K562 cell differentiation. We also identify TRIM28 as another interaction partner of CBX8 by proteomic analysis. Intriguingly, TRIM28 maintains protein stability of CBX8 and TRIM28 loss significantly induces proteasomal degradation of CBX8, resulting in an acceleration of erythroid differentiation. Here, we demonstrate the involvement of the CBX8-TRIM28 axis during CML cell differentiation, suggesting that CBX8 and TRIM28 are promising novel targets for CML research.

• International Journal of Aeronautical and Space Sciences
• /
• 제12권2호
• /
• pp.156-162
• /
• 2011

The preliminary design stage of helicopters consists of various operations and in each operation design several detailed analysis tasks are needed. The analysis tasks include performance and the required power estimation. In helicopter design, those are usually carried out by adopting the momentum theory. In this paper, an explicit form of computational analysis based on the blade element theory and uniform/non-uniform inflow model is developed. The other motivation of the present development is to obtain trim and required power estimation for various helicopter configurations. Sectional and hub loads, power, trim, and flapping equations are derived by using a symbolic tool. Iterative computations are carried out till convergence is achieved in the blade response, inflow, and trim. The predictions regarding the trim and power estimation turn out to be correlated well with the experimental results. The effect of inflow is further investigated. It is found that the present prediction for the lateral cyclic pitch angle is improved with the non-uniform inflow model as compared to that by the uniform inflow model. The presently improved trim and power estimation will be useful for future helicopter sizing and performance analysis.

• 해양환경안전학회지
• /
• 제27권5호
• /
• pp.656-665
• /
• 2021

본 연구에서는 Froude 수 1.0, 길이 약 10 m 급 소형 고속선의 저항성능과 승선감을 향상시키기 위해 선미 끝단에 트림 탭을 부착하여 항주자세를 제어하였고, 트림 탭의 제원에 따른 성능을 확인하기 위해 CFD 해석을 수행하였다. 먼저 선행 연구로부터 수치해석이 수행되는 스케일에 따라 결과에 차이가 있는 것이 확인되었고, 이를 피하고자 실선 스케일에서의 해석을 수행하였다. 부착된 트림 탭의 코드 길이는 L_PP의 0.5, 1.0, 1.5 %였으며, 선저 면과의 각도는 5° 간격으로 변화를 주었다. 트림 탭은 선박의 선미트림과 부상량을 감소시키는 효과가 있었으며, 이 효과는 트림 탭의 선저 면과의 각도가 클수록, 코드 길이가 길수록 증가하였다. 이로 인해 압력저항은 감소하고 전단저항은 증가하였으며, 두 성분의 변화량에 따라 전 저항 저감율이 결정되었다. 결과로부터 대상 선박의 최적 항주자세는 약 1.5°의 선미트림으로 특정되었고, 이때 저항성능은 약 27 % 개선되었다.

• 정보처리학회논문지:컴퓨터 및 통신 시스템
• /
• 제11권12호
• /
• pp.429-436
• /
• 2022

메모리보다 큰 대용량 테이블들에 대해 해시조인(Hash Join) 수행 시 임시 파일들을 생성해서 조인 과정에서 발생하는 임시 데이터 I/O를 수행하고 조인 종료 시에 그 파일들을 삭제한다. 본 논문에서는 해시조인용 임시 파일들을 하드디스크가 아닌 SSD상에서 관리할 때, 파일 생성 시 fallocate 시스템 콜 및 파일 삭제 관련 trim 옵션이 해시조인 성능에 큰 영향을 미치는 점을 밝힌다. 구체적으로 대표적인 오픈소스 데이터베이스인 PostgreSQL을 이용해서 다양한 상용 및 연구용 SSD 상에서 해시조인 수행 시, 임시 파일들에 대한 fallocate 및 trim 옵션 사용 여부에 따라 디폴트 조합에 비해 최대 약 3~5배 조인 성능 향상이 가능함을 보인다. 그리고, 임시 파일들에 대한 두 옵션의 조합여부에 따른 SSD내의 쓰기 증폭(Write Amplification)과 Trim 명령어 오버헤드가 조인 성능에 큰 영향을 미치는 점을 자세히 분석한다.