• Smart Structures and Systems
• /
• v.3 no.2
• /
• pp.133-146
• /
• 2007

This paper addresses a new type of broad and stage-based hybrid carbon fiber reinforced polymer (HCFRP) sensor that is suitable for the sensing of infrastructures. The HCFRP sensors, a type of composite sensor, are fabricated with three types of carbon tows of different strength and moduli. For all of the specimens, the active materials are carbon tows by virtue of their electrical conductivity and piezoresistivity. The measurement principles are based on the micro- and macro-fractures of different types of carbon tows. A series of experiments are carried out to investigate the sensing performances of the HCFRP sensors. The main variables include the stack order and volume fractions of different types of carbon tows. It is shown that the change in electrical resistance is in direct proportion to the strain/load in low strain ranges. However, the fractional change in electrical resistance (${\Delta}R/R_0$) is smaller than 2% prior to the macrofractures of carbon tows. In order to improve the resistance changes, measures are taken that can enhance the values of ${\Delta}R/R_0$ by more than 2 times during low strain ranges. In high strain ranges, the electrical resistance changes markedly with strain/load in a step-wise manner due to the gradual ruptures of different types of carbon tows at different strain amplitudes. The values of ${\Delta}R/R_0$ due to the fracture of high modulus carbon tows are larger than 36%. Thus, it is demonstrated that the HCFRP sensors have a broad and stage-based sensing capability.

• Journal of Korea Trade
• /
• v.25 no.6
• /
• pp.34-56
• /
• 2021

Purpose - This study presents strategies to overcome the COVID-19-induced crisis in Korea's meetings, incentives, conferences, and exhibitions (MICE) industry. It aims to quantitatively identify the environmental factors affecting the industry and their degree of influence, and derive optimal countermeasures. Design/methodology - The study applied the SWOT-AHP-TOWS framework. An AHP analysis was first performed within the SWOT frame, and then a TOWS analysis was conducted using the results of the SWOT-AHP analysis. In the AHP analysis, the number of pairwise comparison questions was limited to four for each SWOT factor to increase the consistency of responses by reducing the burden on respondents. Findings - The plunge in demand (threats factor) has had an overwhelming impact on the MICE industry, more than any other environmental factor. To overcome the crisis, the ST alternative that takes advantage of dynamic pop culture to minimize the business damage caused by the plunge in demand was the top priority measure. Based on the results, this study presents suggestions for overcoming the crisis in the MICE industry. First, the industry should develop profitable business models to supplement scarce financial resources by exploiting Korea's success with quarantine management. Second, the government must provide emergency relief funds or bailout support to protect MICE facilities and employees. Originality/value - Unlike previous work on the MICE industry, this study utilized the SWOT-AHPTOWS framework to derive quick research results in an abnormal situation. This approach can be expanded to other countries with different industrial environments and situations. Additionally, when applying this method to MICE sub-sectors, countermeasures should be tailored to each field.

• Journal of Industrial Convergence
• /
• v.20 no.6
• /
• pp.7-15
• /
• 2022

Recently, due to the development of AI and big data technologies following the advent of the era of the 4th Industrial Revolution, the emerging metaverse industry is emerging as a new business, and in particular, from this point of view, this paper analyzes the history of metaverse and the pros and cons of "Geppetto", which is the most popular in the Korean metaverse market, and aims to give an appropriate direction for future development based on this. In order to carry out this study, we first used SWOT analysis techniques as an initial enterprise analysis method to examine the strengths and weaknesses, opportunities and threat requirements, and derive the status of each factor. Based on the factors in each of the subsequent derivatives, we wanted to explore the TOWS development strategy and present significant implications based on this.

• Journal of Venture Innovation
• /
• v.4 no.1
• /
• pp.87-99
• /
• 2021

The importance of "personalization technology" has recently been highlighted due to the Covid-19 and the development of IT technology such as AI and big data, which is soon coming beyond personalization into the "super-personalization era." Therefore, in terms of the music streaming service market, it has formed a service supply trend in which individual tastes are respected and companies are seeking to establish a realistic analysis and development direction considering the external market environment. From this perspective, this paper sought to analyze the strengths and weaknesses of the Genie Music's and provide a direction for development based on Genie Music's customer interactive strategy. In particular, it was intended to analyze the advantages and disadvantages of customer interactive strategies with the 'live music service platform' that moves with customers and to provide directions for future corporate development. As an analysis method, we looked at strengths and weaknesses, opportunities and threat requirements based on SWOT analysis. Afterwards, the company attempted to present specific corporate development strategies through TOWS analysis.

• Proceedings of the KSME Conference
• /
• 2001.06c
• /
• pp.246-250
• /
• 2001

In resin transfer molding (RTM), resin is forced to flow through the fiber perform of inhomogeneous permeability. This inhomogeneity is responsible for the mismatch of resin velocity within and between the fiber tows. The capillary pressure of the fiber tows exacerbates the spatial variation of the resin velocity. The resulting microscopic perturbations of resin velocity at the flow front allow numerous air voids to form. In this study, a mathematical model was developed to predict the formation and migration of micro-voids during resin transfer molding. A transport equation was employed to account for the migration of voids between fiber tows. Incorporating the proposed model into a resin flow simulator, the volumetric content of micro-voids in the preform could be obtained during the simulation of resin impregnation.

• Fisheries and Aquatic Sciences
• /
• v.15 no.4
• /
• pp.337-343
• /
• 2012

The Korean bottom trawl survey was conducted using a trawl designed by the National Fisheries Research and Development Institute (NFRDI). The capture efficiency and size selectivity of this trawl for snow crab Chionoecetes opilio was investigated by experimental tows. An auxiliary sampling net (underbag) was attached beneath the trawl net to capture crabs escaping under the trawl footrope. Experimental tows were made by the same vessel speed (3.4 knots) as in the bottom trawl survey, but toing time was shortened from the standard 30 min to 10 min to reduce possible trawl distortion due to the high catch rate of mud and debris in the underbag. In averaged over 17 tows conducted between 110-383 m depth, trawl efficiency of both males and females combined increased from about 10% at 20 mm (carapace width) to about 70% at 100 mm, with a width of 50% capture equal to 78 mm.

• Ocean Science Journal
• /
• v.40 no.1
• /
• pp.11-16
• /
• 2005

Correction factors based on the catch ratios of egg and larval densities in the southern waters of Korea were estimated for anchovy Engraulis japonica. This was undertaken in order to adjust ichthyoplankton data from different sampling methods, gear types and time. Samples were collected during ichthyop1ankton surveys in Korean waters from 1983 to 1994. The ratios for egg densities obtained in vertical tows with a NORPAC net (ring $\Phi$, 45 cm) compared to those obtained in oblique tows with a KOB net (ring $\Phi$, 80 cm) were 0.86 (CV = 0.65), 1.22 (CV = 0.36), and 0.93 (CV = 0.42) for early, middle, and later developmental stages, respectively. The ratios for larval densities for vertical and oblique tows varied depending on size. For yolk-sac and small larvae (< 4 mm), the ratios were 3.08 (CV = 0.45) and 1.98 (CV = 1.34), while those of 4-6 mm, 6-8 mm, and 8-10 mm larvae were 0.44 (CV = 1.31), 0.45 (CV = 1.70), and 0.56 (CV = 2.50), respectively. Ratios of day/night densities for larvae of 4-10 mm lengths were lower (0.01-0.06) in offshore catches than values obtained in coastal areas (0.440.46) and similar values (0.16-0.04) for vertical and oblique tows. Our results indicated that vertical towing is more efficient for sampling early life stages (from eggs to larvae less than 4 mm long), while oblique towing is more efficient for larvae longer than 4 mm due to depth preferences for each developmental stage (e.g., changes in egg buoyancy and vertical migration oflarvae).

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.9 no.1
• /
• pp.64-69
• /
• 1999

Polyacrylonitrile(PAN)-based carbon fiber tows were heat-treated by the internal resistance heating method under the certain load. To consider the strain behavior of the fiber tows during heat-treatments, 1200~$2200^{\circ}C$, strain changes of those were measured. It was observed that the larger longitudinal strain was induced under the larger stretching stress. The changes in the strain are different from the temperature regions below and above $1700^{\circ}C$. Obtained apparent activation energies under the stretching stresses of 70 and 322 MPa from time-strain curves were 67.46 and 52.27kJ$mol^{-1}$, respectively. Therefore, it was known that the larger stretching stresses effectively reduce the apparent activation energy of the fiber structure development of the fiber tows.

• Aerospace Engineering and Technology
• /
• v.9 no.2
• /
• pp.73-79
• /
• 2010

In this study, the equivalent elastic modulus of flexible textile composites was predicted by nonlinear finite element analysis. The analysis was carried out considering the material nonlinearity of fiber tows and the geometrical nonlinearity during large deformation using commercial analysis software, ABAQUS. To account for the geometrical nonlinearity due to the large shear deformation of fiber tows, a user defined material algorithm was developed and inserted in ABAQUS. In results, nonlinear stress-strain curve for the flexible textile composites under uni-axial tension was predicted from which effective elastic modulus was obtained and compared to the test result. The effective elastic moduli were calculated for the various finite element models with different waviness ratio of fiber tow.

• Korean Journal of Ichthyology
• /
• v.20 no.3
• /
• pp.228-232
• /
• 2008

To investigate a proper sampling method for anchovy eggs and larvae in coastal waters of the South Sea, replicated samplings were made by different towing methods with different sampling gears and compared in terms of abundance and length composition. There was no significant difference in abundance in samples from vertical and oblique tows with a ring net. The abundance by replicated vertical tows with a ring net was not significantly different, but significant difference in abundance among sampling stations were found. The ring net sampled anchovy eggs in significantly greater numbers than collected by a NORPAC net, but both gears were not effective in obtaining quantitative samples of anchovy larvae larger than 3 mm. Therefore, samples by vertical tows with a ring net during the day at various stations is more efficient at estimating the density of anchovy eggs in an area compared to replicated sampling at a single station.