• Journal of the Korean Society for Precision Engineering
• /
• v.19 no.12
• /
• pp.86-92
• /
• 2002

This paper presents a new model of NC verification in NC milling using z-map. The model can describe the motion of machine tool like a real machine effectively. The model uses x, y, and z directional feed rate as well as cutting data for modeling Z-map of workpiece. The model verifies the over-cut, the under-cut and the surface topography using NC codes and cutting conditions. To investigate the performance of the model, simulation study was carried out. As the results, the model gave the geometry accuracy of workpiece, the surface topography, and the chip loads.

• Ocean Systems Engineering
• /
• v.1 no.3
• /
• pp.195-205
• /
• 2011

A method for calibrating a laser profiling system for seafloor micro-topography measurements is described. The system consists of a digital camera and an arrangement of six red lasers that are mounted as a unit on a remotely operated vehicle (ROV). The lasers project as parallel planes onto the seafloor, creating profiles of the local topography that are interpreted from the digital camera image. The goal of the calibration was to determine the plane equations for the six lasers relative to the camera. This was accomplished in two stages. First, distortions in the digital image were corrected using an interpolation method based on a virtual pinhole camera model. Then, the laser planes were determined according to their intersections with a calibration target. The position and orientation of the target were obtained by a registration process. The selection of the target shape and size was found to be critical to a successful calibration at sea, due to the limitations in the manoeuvrability of the ROV.

• Journal of the Optical Society of Korea
• /
• v.13 no.2
• /
• pp.213-217
• /
• 2009

The transcription characteristics of the mold surface in the molding of aspherical glass lenses for camera phone modules have been investigated experimentally. The surface topographies of both the form and the roughness were compared between the mold and the molded lens. For the form topography, the molded lens showed a transcription ratio of 93.4% against the mold, which is obtained by comparing the form error (PV) values of the mold and the molded lens. The transcription characteristics of the roughness topography were ascertained by bearing ratio analysis.

• Laser Solutions
• /
• v.10 no.1
• /
• pp.19-27
• /
• 2007

Previous studies demonstrated that laser ablation under transparent liquid can result in ablation enhancement and particle removal from the surface. Although the ablation enhancement by liquid is already known for semiconductor and metal, the phenomena of polymer ablation have not been studied. In this work, tile liquid-assisted excimer laser ablation process is examined for polymer materials, such as polyethylene terephthalate (PET), polymethyl methacrylate (PMMA) with emphasis on ablation enhancement and surface topography. In the case of PET and PMMA, the effect of liquid is analyzed both for thin water film and bulk water. The results show that application of liquid increases the ablation rate of PMMA while that of PET remains unchanged even in the liquid-assisted process. However, the surface roughness is generally deteriorated in the liquid-assisted process. The surface topography is found to be strongly dependent on the method of liquid application, i.e., thin film or bulk liquid.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2000.04a
• /
• pp.613-617
• /
• 2000

This paper descries the effect of the stylus tip size on the measuring error in surface topography measurement. To analyze the distortional effect of an actual surface geometry originating from the finite stylus size, the surface is modeled as a sinusoid and the stylus tip as a circle. the measuring error is defined as the ratio of the standard deviation of a tracing profile and an original profile. It is shown that this measuring error depends on the amplitude and wavelength of an original profile. In this paper, the spectrum analysis is applied to investigate the distortional effect due to the mechanical filtering of the stylus in the frequency domain. and, the cumulative power spectrum is applied to determinate the minimum wavelength limits to be measured with the various stylus tip radius from these results, a new method to select proper stylus tip radius is proposed.

• Journal of Korea Water Resources Association
• /
• v.46 no.3
• /
• pp.245-252
• /
• 2013

The reflection coefficients of monochromatic water waves over various shear currents flowing on a constant topography are estimated analytically in this study. The region of varying shear currents is represented by a finite number of tiny steps with a uniform depth topography. The proper numbers of steps and evanescent modes needed for the analysis are proposed by a series of convergence tests. The characteristics of reflection coefficients for various shear currents conditions are also examined.

• 한국신재생에너지학회:학술대회논문집
• /
• 2008.10a
• /
• pp.87-90
• /
• 2008

In design PV(photovoltaic) system, there are many important factors to consider for best site selection. It is essential to understand to know the amount of sunlight available and how to minimize the shadings. This study presents basic concepts for understanding sun's position and insolation. also gives easy tools for topography analysis. Finally, this study shows some theoretical calculations of power generation losses and disadvantages in economic feasibility.

• Food Science of Animal Resources
• /
• v.23 no.4
• /
• pp.361-375
• /
• 2003

In this study, significant factors influencing on the quality and stability of fermented sausage, such as materials, processing conditions, and microbiological characteristics as well as topography during ripening, were documented. Since most fermented sausages are not heated during manufacture or before consumption, a strict control of the growth of pathogens and the selection of favourable conditions that encourage the specific growth and development of desirable microflora are particularly important. With respect to microbiological safety, hurdles, i.e., preservations(nitrite), redox potential, competitive flora, acidity(pH), and water activity($a_{w}$) are matters of importance to prevent proliferation of bacterial pathogens. Today, for ensuring the safety and quality of the final product, the application of starter cultures in combination with the proper processing is subsequently used in practice. For improving the efficiency of microbiological utility in the production of fermented sausages, the understanding of their topography is essential. The documented different points must be taken into account when HACCP systems set up for the manufacture of fermented sausages. There are continuous researches concerning desirable improvements to sausage fermentation with health enhancing properties.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2009.03a
• /
• pp.607-619
• /
• 2009

In case that there is not an influence of river influx because the foundation is a good rock and the mountain topography, we present the design case for the reasonable underpass foundation form, bearing capacity and drainage process considering the topography and the ground condition.

• Journal of the Korean Ceramic Society
• /
• v.31 no.3
• /
• pp.249-256
• /
• 1994

By surface structure and X-ray topographic observation, growth mechanism of NAB single crystal grown by TSSG technique using a BaB4O7 flux was studied. Surface structure of grown crystals were investigated by optical microscope. Growth history and crystal defects included within grown crystal were investigated using X-ray topography. The {001} faces were grown by 2-D nucleation growth. As decreasing cooling rate, growth mechanism of {111} and {11} was changed from 2-D nucleation growth to the growth by screw dislocation. Only surface striations developed parallel to a-axis were observed on {010} faces. Growth sector of NAB crystals were divided into {001}, {111}, {010}, {021}, {11}. The inclusion which was usually trapped between {001} faces was investigated.