• Title/Summary/Keyword: TNO

Search Result 49, Processing Time 0.027 seconds

Transcription factor NF-kB as a potential biomarker of oxidative stress to evaluate antioxidant effects

  • Berg, Robin van den;Sierksma, Aafje;Hendriks, Henk F.J.;Vaes, Wouter H.J.
    • Proceedings of the Korean Society of Toxicology Conference
    • /
    • 2003.05a
    • /
    • pp.25-26
    • /
    • 2003
  • There is increasing interest in the involvement of transcription factors, such as of the transcription factor NF-kB (nuclear factor-kB), in the pathogenesis of various diseases. The involvement ofNF-kB is especially of interest as it is activated by oxidative stress and its activation can be modulated by antioxidant compounds. (omitted)

  • PDF

Comparative Analysis of Flicker Noise and Reliability of NMOSFETs with Plasma Nitrided Oxide and Thermally Nitrided Oxide (Plasma Nitrided Oxide와 Thermally Nitrided Oxide를 적용한 NMOSFET의 Flicker Noise와 신뢰성에 대한 비교 분석)

  • Lee, Hwan-Hee;Kwon, Hyuk-Min;Kwon, Sung-Kyu;Jang, Jae-Hyung;Kwak, Ho-Young;Lee, Song-Jae;Go, Sung-Yong;Lee, Weon-Mook;Lee, Hi-Deok
    • Journal of the Korean Institute of Electrical and Electronic Material Engineers
    • /
    • v.24 no.12
    • /
    • pp.944-948
    • /
    • 2011
  • In this paper, flicker noise characteristic and channel hot carrier degradation of NMOSFETs with plasma nitrided oixde (PNO) and thermally nitrided oxide (TNO) are analyzed in depth. Compared with NMOSFET with TNO, flicker noise characteristic of NMOSFET with PNO is improved significantly because nitrogen density in PNO near the Si/$SiO_2$ interface is less than that in TNO. However, device degradation of NMOSFET with PNO by channel hot carrier stress is greater than that with TNO although PMOSFET with PNO showed greater immunity to NBTI degradation than that with TNO in previous study. Therefore, concurrent investigation of the reliability as well as low frequency noise characteristics of NMOSFET and PMOSFET is required for the development of high performance analog MOSFET technology.

A Review of the Different Models for Predicting Blast Overpressures Caused by Vapor Cloud Explosions (증기운 폭발에 의해 발생된 폭풍 과압 예측 모델 검토)

  • Park Dal Jae;Lee Young Soon;Lim Young Hoon
    • Journal of the Korean Institute of Gas
    • /
    • v.4 no.4 s.12
    • /
    • pp.50-57
    • /
    • 2000
  • Past accidents have shown that vapor cloud explosions are the predominant cause of the largest losses in the chemical and petrochemical industries due to the generation of significant overpressures. Prediction of such overpressure is of great concern and a knowledge of the likely overpressure is needed for the design of equipment, safety cases and emergency planning. For these reasons, risk assessment for vapor cloud explosion is crucial and this assessment can be carried out using the different models including TNT-Equivalency, TNO Hemispherical, TNO Multi-Energy and CFD models. Accordingly, in this paper, the published VCE prediction models are reviewed to provide a critical comparison of the different models used for the quantification of explosion hazards, in terms of the fundamental assumptions employed, and their predictive accuracy

  • PDF

A Review of the Methods for the Estimation of the Explosion Parameters for Gas Explosions (가스 폭발에 따른 폭발 인자 추정을 위한 방법 고찰)

  • Minju Kim;Jeewon Lee;Sangki Kwon
    • Explosives and Blasting
    • /
    • v.41 no.3
    • /
    • pp.73-92
    • /
    • 2023
  • With the increase of risk of gas explosion, various methods for indirectly estimating the explosion paramaters, which are required for the prediction of gas explosion scale and impact. In this study, the characteristics of the most frequently used methods such as TNT equivalent method, TNO multi-energy method, and BST method and the processes for determining the parameters of the methods were compared. In the case of TNT equivalent method, an adequate selection of the efficiency factor for various conditions such as the type of vapor cloud explosion and explosion material is needed. There is no objective guidelines for the selection of class number in TNO multi-energy method and it is not possible to estimate negative overpressure. It was found that there were some mistakes in the reported parameter values and suggested corrected values. BST method provides more detailed guidelines for the estimation of the explosion parameters including negative overpressure, but the graphs used in this methods are not clear. In order to overcome the problem, the graphs were redrawn. A more convenient estimation of explosion parameters with the numerical expression of the redrawn graphs will be available in the future.

Self-Reported Symptoms and Stereopsis in Viewing 2D and 3D Images (2D와 3D입체 영상 시청에서 나타난 자각 증상과 입체시)

  • Lee, Wook-Jin;Son, Jeong-Sik;Kwak, Ho-Won;Kim, In-Su;Yu, Dong-Sik
    • Journal of Korean Ophthalmic Optics Society
    • /
    • v.16 no.1
    • /
    • pp.83-90
    • /
    • 2011
  • Purpose: This study aimed to compare and assess whether there was a relation between self-reported symptom and stereopsis in viewing an anaglyph 3D and a general 2D image. Methods: Seventy subjects (38 males, 32 females) were students ranging in age from 20 to 30 years. Subjects' symptoms were investigated by a questionnaire after viewing the 2D image and the anaglyph 3D image using red-green glasses for 30 minutes. Titmus circles and TNO stereopsis tests were performed before and after the images. A correlation between symptom and stereopsis was evaluated. Results: Both ocular and nonocular symptom in viewing 3D image were higher than those in 2D image. Titmus circles stereopsises using polarized filters were not changed before and after viewing images, but TNO stereopsises using color filters such as red-green glasses were increased after viewing 3D image. Ocular symptom and TNO stereopsis were increased after viewing 3D image, and there was a good correlation between them (r=0.605). Conclusions: Better stereopsises before viewing 3D are relatively lower ocular symptoms in viewing 3D image. But symptoms are increased in viewing anaglyph 3D image for a short-time and improvement of TNO steropsis is poorly associated with the relief of ocular symptoms. This tendency seems to be related with an adaptation to anaglyph 3D image with red-green glasses.

The Core Values that Support Health, Safety, and Well-being at Work

  • Zwetsloot, Gerard I.J.M.;van Scheppingen, Arjella R.;Bos, Evelien H.;Dijkman, Anja;Starren, Annick
    • Safety and Health at Work
    • /
    • v.4 no.4
    • /
    • pp.187-196
    • /
    • 2013
  • Background: Health, safety, and well-being (HSW) at work represent important values in themselves. It seems, however, that other values can contribute to HSW. This is to some extent reflected in the scientific literature in the attention paid to values like trust or justice. However, an overview of what values are important for HSW was not available. Our central research question was: what organizational values are supportive of health, safety, and well-being at work? Methods: The literature was explored via the snowball approach to identify values and value-laden factors that support HSW. Twenty-nine factors were identified as relevant, including synonyms. In the next step, these were clustered around seven core values. Finally, these core values were structured into three main clusters. Results: The first value cluster is characterized by a positive attitude toward people and their "being"; it comprises the core values of interconnectedness, participation, and trust. The second value cluster is relevant for the organizational and individual "doing", for actions planned or undertaken, and comprises justice and responsibility. The third value cluster is relevant for "becoming" and is characterized by the alignment of personal and organizational development; it comprises the values of growth and resilience. Conclusion: The three clusters of core values identified can be regarded as "basic value assumptions" that underlie both organizational culture and prevention culture. The core values identified form a natural and perhaps necessary aspect of a prevention culture, complementary to the focus on rational and informed behavior when dealing with HSW risks.

Properties of Nb-doped TiO2 Transparent Conducting Oxide Film Fabricated by RF Magnetron Sputtering (RF 마그네트론 스퍼터링에 의해 합성된 Nb-doped TiO2 투명전극의 특성)

  • Kim, Min-Young;Cho, Mun-Seong;Lim, Dong-Gun;Park, Jae-Hwan
    • Journal of the Korean Institute of Electrical and Electronic Material Engineers
    • /
    • v.25 no.3
    • /
    • pp.204-208
    • /
    • 2012
  • $TiO_2$ ($Ti_{1-x}Nb_xO_2$, x= 0.04~0.06) transparent conducting oxide film was fabricated by RF magnetron sputtering process and their electrical, optical, stability properties were studied. When the Nb 4 at% sputtering target was used with RF power 120 W, pressure 8 mTorr, post-annealing temperature $600^{\circ}C$, the resistivity of TNO film was $4{\times}10^{-4}\;{\Omega}-cm$. The optical transmittance in the visible wavelength was ca. 86%. TNO films require heat treatment during or after the deposition process. When the film was deposited at room temperature and post-annealed at $600^{\circ}C$, the lowest resistivity was obtained. When the TNO film was exposed to high temperature and humidity, the resistivity of the film was rather decreased. The stability to temperature and humidity implies that the TNO film could be a appropriate candidate for In-free, ZnO-free transparent conducting oxide materials.